Extron MLC 206 - Manuals

Extron MLC 206 – Manual in PDF format online.

Manuals:

Manual Extron MLC 206

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8

Summary

Page 2 - MLC 206 Setup Guide, cont’d; Step 1 — Computer Connection; and for loading configuration and driver files into the MLC.; Connect all control modules that will be used in the system.; A B C D; MLC 206 to a control module; Total distance from

MLC 206 Setup Guide, cont’d 2 Step 1 — Computer Connection The MLC 206 must be connected to a PC in order to configure the controller. The configuration port, shown in the rear panel view below, is used for system control and for loading configuration and driver files into the MLC. 1. Connect a host...

Page 3 - To power the MLC, connect a 12 VDC power supply or an optional; MediaLink Switcher; MLC 206 powered by a MediaLink Switcher; A B; A ground wire must be connected; A B; Step 2 — Software Installation; that appear on the screen.

3 3. To power the MLC, connect a 12 VDC power supply or an optional MediaLink Switcher (MLS) to the MLS/Power port, and connect the power supply or the switcher to a power source. MediaLink Switcher MLC/RS-232 A B MLC 206 powered by a MediaLink Switcher Connecting an MLC 206 to an external power sup...

Page 4 - Step 3 — Setting up projector control; It is strongly recommended that an RS-232 control (; Load Extron Driver; filename

MLC 206 Setup Guide, cont’d 4 Step 3 — Setting up projector control Device drivers allow the MLC 206 to control projectors and other source devices via RS‑232 or IR. N It is strongly recommended that an RS-232 control ( filename RS1.mll) file for controlling a projector be used whenever possible. To...

Extron Manuals