Extron 68-1021-01 - Manuals

Page 2 - Precautions; Safety Instructions • English; FCC Class A Notice; Extron’s Warranty

Precautions This symbol is intended to alert the user of importantoperating and maintenance (servicing) instructionsin the literature provided with the equipment. This symbol is intended to alert the user of thepresence of uninsulated dangerous voltage withinthe product's enclosure that may present ...

Page 3 - IPL M PDP-ES • Quick Start Guide; Turn all of the equipment off; and disconnect it from the power; Remove the preinstalled Pioneer communication ES card; from the; Install the Extron IPL M PDP-ES interface card; into the Pioneer; Quick Start Guide — IPL M PDP-ES

IPL M PDP-ES • Quick Start Guide QS-1 To install and set up the IPL M PDP-ES interface card, followthese steps: Step 1 Turn all of the equipment off and disconnect it from the power source. Step 2 Remove the preinstalled Pioneer communication ES card from the Pioneer plasma. Refer to Removing the Pi...

Page 4 - Chapter 1 • Introduction; Chapter 4 • Communication and Control; Table of Contents; Attach the serial communication cable; to the RS-232 port of the; Configure the IPL M PDP-ES interface; via the default Web; The IPL M PDP-ES interface card

IPL M PDP-ES • Quick Start Guide Quick Start Guide — IPL M PDP-ES, cont’d i IPL M PDP-ES • Table of Contents Chapter 1 • Introduction .......................................................... 1-1 About this Manual ................................................................ 1-2 About the IPL M ...

Page 5 - Table of Contents, cont’d; Chapter One; Introduction; About this Manual; Pioneer Plasma A/V Device Control; Appendix A • Specifications; Specifications; Appendix B • Glossary

ii IPL M PDP-ES • Table of Contents Table of Contents, cont’d IPL M PDP-ES 1 Chapter One Introduction About this Manual About the IPL M PDP-ES Interface Card Features 68-1021-01 Rev A 11 04 All trademarks mentioned in this manual are the properties of their respective owners. Programmer’s Guide for ...

Page 6 - IPL M PDP-ES • Introduction

IPL M PDP-ES • Introduction Introduction IPL M PDP-ES • Introduction • Email Alerts — Email reminders can be sent to a specified mailbox automatically when certain conditionsare true. When a scheduled or monitored event occurs(such as the number of usage hours on the plasma)maintenance personnel can...

Page 7 - Chapter Two; Installation and Operation; Installation Overview

IPL M PDP-ES • Introduction Introduction, cont’d IPL M PDP-ES 2 Chapter Two Installation and Operation Installation Overview Installation of the IPL M PDP-ES Interface Card Panel Features and Cabling Operation 1-4

Page 8 - CAUTION; Installing the Extron IPL M PDP-ES card; Install the Extron IPL M PDP-ES interface card.; Installation of the IPL M PDP-ES Interface Card; Removing the Pioneer communication ES card; Figure 2-1— Pioneer ES Card Slots; Gently pull the center knob

IPL M PDP-ES • Installation and Operation IPL M PDP-ES • Installation and Operation Installation and Operation 2-3 To remove the Pioneer communication ES card, do thefollowing: 1 . Ensure that the Pioneer plasma is turned off anddisconnected from the power source. 2 . If the plasma display is laid w...

Page 9 - Installation and Operation, cont’d; Ethernet/LAN communication; LAN Activity LED; For best performance, use a shielded Ethernet cable.; Power; — The green LED lights to indicate; Figure 2-5 — The IPL M PDP-ES sticker label; Push gently

IPL M PDP-ES • Installation and Operation IPL M PDP-ES • Installation and Operation Installation and Operation, cont’d 2-5 Panel Features and Cabling See figure 2-6 below for detailed information about connections,LEDs, and power. IPL M PDP-E S ACT LINK RE S ET LAN R S -2 3 2 4 6 5 2 1 3 Figure 2-6 ...

Page 10 - Resetting the unit; A mode 2 reset disconnects a pass-through connection.; Pin; Operation; DB9 Pin Location

IPL M PDP-ES • Installation and Operation IPL M PDP-ES • Installation and Operation Installation and Operation, cont’d 2-7 Resetting the unit There are five reset modes available by using the Reset button( 5 ) on the front panel. The Reset button is recessed, so use of a pointed stylus, ballpoint pe...

Page 11 - IPL M PDP-ES • Installation and Operation; Chapter Three; Connection and Configuration; Connecting the Hardware; Mode 4

IPL M PDP-ES • Installation and Operation Installation and Operation, cont’d IPL M PDP-ES 3 Chapter Three Connection and Configuration Connecting the Hardware Configuring the Hardware 2-8 • If events are currently running following themomentary (<1 second) press, the Power LED flashesthree times,...

Page 12 - PC connection; Connect the other end of the cable to a local PC.; Serial connection; Figure 3-2 — Controller device wiring; Configuring the Hardware; PC configuration; Figure 3-1 — IPL M PDP-ES interface connections; Direct PC connection

IPL M PDP-ES • Connection and Configuration IPL M PDP-ES • Connection and Configuration Connection and Configuration 3-3 3. Ensure that your PC is connected to the network switch,hub, or router. RS-232 port The IPL M PDP-ES can be connected to a controller device or alocal PC through its RS-232 port...

Page 13 - Connection and Configuration, cont’d; Figure 3-3 — Executing the ARP command; IPL M PDP-ES interface card configuration; Use the ARP command method.; Configuring the IPL M PDP-ES using the ARP command; Use ARP to configure the IP address as follows:

IPL M PDP-ES • Connection and Configuration IPL M PDP-ES • Connection and Configuration Connection and Configuration, cont’d 3-5 Enter the desired new IP address and the MAC address(located on the face panel) for the interface card. Forexample: arp –s 10.13.170.15 00-05-A6-00-0A-90 Figure 3-3 — Exec...

Page 14 - Configuring the IPL M PDP-ES using the RS-232 port; The unit should respond with; table; arp –d; removes all static IP addresses from the ARP table.; Configuring the IPL M PDP-ES using direct PC connection

IPL M PDP-ES • Connection and Configuration IPL M PDP-ES • Connection and Configuration Connection and Configuration, cont’d 3-7 IP address: 192.168.254.253 Subnet mask: 255.255.0.0 8. Save the changes and exit the Network setup. Reboot thePC, if required, for the changes to become effective. 9. Lau...

Page 15 - IPL M PDP-ES • Connection and Configuration; Chapter Four; Communication and Control; Communication with the Interface Card; Firmware upgrades

IPL M PDP-ES • Connection and Configuration Connection and Configuration, cont’d IPL M PDP-ES 4 Chapter Four Communication and Control Communication with the Interface Card Programmer’s Guide for the Telnet and Web Browser Pioneer Plasma A/V Device Control Troubleshooting 3-8 Firmware upgrades Firmw...

Page 16 - Accessing and using the Web server; Launch your Web browser.; Navigating the default Web pages; Status tab; Figure 4-1 — System Status page; Configuration tab; Figure 4-2 — System Settings page

IPL M PDP-ES • Communication and Control IPL M PDP-ES • Communication and Control Communication and Control Communication with the Interface Card The on-board Web server has a set of built in, default Webpages, which can be accessed via a Web browser. These pagesare used to control the IPL M PDP-ES ...

Page 17 - IPL M PDP-ES • Communication and Control; Gateway IP address; To do so; IP settings fields; Click in the address field.

IPL M PDP-ES • Communication and Control Communication and Control IPL M PDP-ES • Communication and Control Gateway IP address The Gateway IP Address field identifies the address of thegateway to the mail server to be used if the interface card andthe mail server are not on the same subnet. To use E...

Page 18 - Communication and Control, cont’d; Figure 4-4 — Web server Passwords screen; Email Alerts page; Tab over to the second field to reenter the same password.

IPL M PDP-ES • Communication and Control IPL M PDP-ES • Communication and Control Communication and Control, cont’d Figure 4-4 — Web server Passwords screen After you press the Submit button, the password windowshould appear (figure 4-5). Figure 4-5 — Web server password window 5. Enter your adminis...

Page 19 - To edit notification email addresses from the Email Alerts page:; File names must end with an .eml extension.; Sending an email alert through Telnet; Figure 4-7 — Firmware Upgrade page

IPL M PDP-ES • Communication and Control IPL M PDP-ES • Communication and Control Communication and Control, cont’d notification indicating the number of operation hoursremaining). The scheduled notification is sent to the appropriatemailbox. To edit notification email addresses from the Email Alert...

Page 20 - File Management tab; Figure 4-8 — Web server File Management screen; To create a directory:

IPL M PDP-ES • Communication and Control IPL M PDP-ES • Communication and Control Communication and Control, cont’d Update the firmware as follows: 1 . Visit the Extron web site at www.extron.com. 2 . Select the IPL product category from the “ProductShortcut” drop-down box, and select the latest fir...

Page 21 - Pioneer tab; have no access to this tab.; Display Status page; Figure 4-9 — Pioneer Display Status screen; Display Controls page; Figure 4-10 — Pioneer Display Controls screen; • A blue button indicates normal input.; These buttons power the Pioneer plasma on or off.; Input

IPL M PDP-ES • Communication and Control IPL M PDP-ES • Communication and Control Communication and Control, cont’d If you wish to delete all files, click the Delete All button from theroot directory. The file count reverts to 0, and all subsequentpages will be deleted. If the last file in a directo...

Page 22 - Advanced Controls page; Figure 4-11 — Pioneer Advanced Control screen

IPL M PDP-ES • Communication and Control IPL M PDP-ES • Communication and Control Communication and Control, cont’d Control for Input 3, Input 4, and Input 5 is available only withuse of the Expansion Solution video slots for the PDA-5003 orPDA-5004 interface card. See the Pioneer Operating Instruct...

Page 23 - Energy Save; Figure 4-12 — Pioneer Schedule screen; Monitor page; Figure 4-14— Pioneer Monitor screen

IPL M PDP-ES • Communication and Control IPL M PDP-ES • Communication and Control Communication and Control, cont’d Energy Save When an energy save function is selected, power consumptionis reduced compared to the normal operating mode. When setto Auto, this sensor measures the level of light inside...

Page 24 - Symbol definitions; = Command data section; Using the command/response table; Note for Web browsers

IPL M PDP-ES • Communication and Control Communication and Control, cont’d IPL M PDP-ES • Communication and Control example of each command in ASCII (Telnet) and URL Encoded(Web). Upper and lower case text can be used interchangeablyexcept where noted. Symbol definitions are shown below. An ASCII to...

Page 25 - Applicable to Ethernet only.; Copyright information; Email files must have the file extension .eml.

IPL M PDP-ES • Communication and Control IPL M PDP-ES • Communication and Control Communication and Control There is a 7 character limit for full file names. It isadvised that you use numeric titles (e.g., 1.eml, 24.eml).Numeric titles reduce the characters of the file name, andassist in keeping the...

Page 26 - Commands that give E14 (Invalid Command for this; administrator level; able for Simple Instruction Set (SIS) commands; Command; Bidirectional Serial Data port

IPL M PDP-ES • Communication and Control IPL M PDP-ES • Communication and Control Communication and Control command contains invalid parameters, it returns an errorresponse to the host.E12 — Invalid port numberE13 — Invalid parameterE14 — Not valid for this configurationE17 — System timed outE22 — B...

Page 27 - IP Setup Commands; Password and Security Settings

IPL M PDP-ES • Communication and Control IPL M PDP-ES • Communication and Control Communication and Control, cont’d 4-25 Command ASCII ( T elnet) URL Encoded (Web) Response IP Setup Commands Set Unit name 24 Esc X12 CN W X12 C N | Ipn• X12 Set Unit name to factory default 24 Esc •CN W%20CN| Ipn• X49...

Page 29 - Ether; Custom Web pages; Accessing and using Telnet; Figure 4-18 — Telnet command prompt

IPL M PDP-ES • Communication and Control IPL M PDP-ES • Communication and Control Communication and Control, cont’d 4-29 4-28 Command ASCII ( T elnet) URL Encoded (Web) Response Ether net Data Port Set curr ent conn port timeout Esc 0* X69 TC W0 %2A X69 TC| Pti 0* X69 V iew current conn port timeout...

Page 30 - Figure 4-19 — Connecting to the IP address; Using direct access; Send Pioneer commands directly to the Pioneer plasma.; Port redirect; Troubleshooting; Power connections; Ensure that the Pioneer plasma is plugged in.; Data connections

IPL M PDP-ES • Communication and Control IPL M PDP-ES • Communication and Control Communication and Control, cont’d 4-31 . 4-30 3. At the < to > prompt, enter the IP address of theIPL M PDP-ES. (The default IP address is 192.168.254.254,but it may have been changed in the setup orconfiguration...

Page 31 - Appendix A; and Accessories; Serial connections; Check to see that events are running.; If status is missing or unavailable; Ensure that the redirect port has been enabled.; If you are unable to access the Web server; If you are still experiencing problems, call the Extron S

IPL M PDP-ES • Communication and Control Communication and Control, cont’d IPL M PDP-ES A Appendix A Specifications, Part Numbers, and Accessories Specifications Parts 4-32 3. If contact is established with the unit, but the unit’s Webpages cannot be accessed by your Web browser, verify (inthe Optio...

Page 32 - Specifications, Part Numbers, and Accessories; Parts; Included parts; Included parts Replacement part number; IPL M PDP-ES User ’s Manual; Ethernet control interface; autodetect; Serial control interface

IPL M PDP-ES • Specifications, Part Numbers, Accessories IPL M PDP-ES • Specifications, Part Numbers, Accessories Specifications, Part Numbers, and Accessories Parts Included parts Included parts Replacement part number IPL M PDP-ES 60-725-01 IPL M PDP-ES User ’s Manual 68-1021-01 IPL M PDP-ES Quick...

Page 33 - IPL T S Series • Specifications, Part Numbers, and Accessories; Appendix B; Glossary

IPL T S Series • Specifications, Part Numbers, and Accessories Specifications, Part Numbers, Accessories, cont’d IPL M PDP-ES B Appendix B Glossary A-4

Page 34 - GLOSSARY

IPL M PDP-ES • Glossary IPL M PDP-ES • Glossary Glossary B-3 devices you have and your current list of IP addresses. Withthis information, GVC creates a GV for your specific devices.The GVC also compiles the event scripts and loads the GV andevent scripts onto the box. When using the GVC, the user m...

Page 35 - Port number; is a preassigned address within a server that; Static IP; refers to an IP address that has been specifically; Telnet; is a utility available on most PCs that allows the; URL encoding; allows you to send information and commands

IPL M PDP-ES • Glossary IPL M PDP-ES • Glossary Glossary, cont’d B-5 B-4 Port number is a preassigned address within a server that provides a direct route from the application to the Transportlayer, or from the Transport layer to the application, of a TCP/IPsystem. Static IP refers to an IP address ...

Page 36 - IPL M PDP-ES • Glossary