Extech EX520 - Manuals

EX520-en-GB_ v2.7 4/15 11 Maintenance WARNING : To avoid electric shock, disconnect the test leads from any source of voltage before removing the back cover or the battery or fuse covers. WARNING: To avoid electric shock, do not operate your meter until the battery and fuse covers are in place and f...

EX520-en-GB_ v2.7 4/15 12 WARNING: To avoid electric shock, do not operate the meter until the battery cover is in place and fastened securely. NOTE: If your meter does not work properly, check the fuses and batteries to make sure that they are still good and that they are properly inserted. REPLACI...

EX520-en-GB_ v2.7 4/15 13 Specifications Function Range Resolution Accuracy DC Voltage 600mV 0.1mV  (0.09% reading + 2 digits) 6V 0.001V 60V 0.01V 600V 0.1V 1000V 1V AC Voltage 50 to 60Hz 40Hz to 1KHz 6V 0.001V  (1.0% reading + 3 dgts)  (2.0% reading + 3 dgts) 60V 0.01V 600V 0.1V 1000V 1V All AC ...

EX520-en-GB_ v2.7 4/15 14 Function Range Resolution Accuracy Resistance 600  0.1   (0.3% reading + 4 digits) 6k  0.001k  60k  0.01k  600k  0.1k  6M  0.001M  40M  0.01M   (0.3% reading + 20 digits) Capacitance 60nF 0.01nF  (3.5% reading + 4 digits) 600nF 0.1nF 6  F 0.001  F 60  F 0....

EX520-en-GB_ v2.7 4/15 15 Enclosure Double molded, waterproof (IP67) Shock (Drop Test) 2 meters (6.5 feet) Diode Test Test current of 0.9mA maximum, open circuit voltage 2.8V DC typical Continuity Check Audible signal will sound if the resistance is less than 100  (approx.), test current <0.35mA...