EverFocus EQ600 WDII - Manuals

Page 2 - Safety Warning; The product may fall down to cause damages.

Safety Warning 1. Read manual carefully before installing the unit. Please read this manual first for correct installation and operation. 2. Never install the camera on a ceiling that cannot hold its weight The product may fall down to cause damages. 3. Do not install the camera near electric or mag...

Page 3 - Table of Contents

1 Table of Contents 1. Product Overview ……….………………..……………..………………………….…….…2 1.1 Main Features.…..…………..………………………………………………..…………2 1.2 Content List………………………………………………………………………………2 1.3 Specifications……………..……….……………………………………………………..3 2. Back Panel Connections ………………………….………………………….…………….4 3. Operation …...

Page 4 - Product Overview

2 Product Overview 1. Product Overview By utilizing Digital Pixel System TM (DPS) sensor technology, the new EQ600WDII dramatically improves the performance of surveillance camera in extreme lighting conditions. Where traditional CCD cameras have difficulty processing images in strong backlighting, ...

Page 5 - Specifications

3 Specifications 1.3 Specifications Pickup Device 1/3” Color DPS sensor Picture Element 720(H) × 540(V) Horizontal Resolution >480 TV lines Sensitivity 1.0 Lux/ F=1.2 (50IRE color) Low Speed shutter Up to 32x(2,4,8,16,32) S/N Ratio >48dB Auto exposure: YES Auto White Balance Yes, 2500K ~9500K ...

Page 6 - Back Panel Connections; Back panel connections; Pin 1 Pin 2 Pin 3 Pin 4

4 Back Panel Connections 2. Back panel connections (1)S-Video / RS-232 port: Connect Mini Din Male Connector to S-Video / RS-232 port for better video output quality or communication. Please refer to the pin assignment of the S-Video/ RS-232 port as below: (2)AC24V/DC12V Compatible Input Terminal: T...

Page 7 - Operation; Camera Setup Operations; Up Button

5 Operation 3.Camera Setup Operations This camera utilizes an On Screen Display (OSD) user setup menu. 3.1 Setup Buttons: To set items on the user setup menu, use the following buttons on the back panel. ① ① ① ① Up Button: This button is used to move the cursor upwards. Use this button to select an ...

Page 8 - Highlighted

6 Operation 3.2 Display/Close the user setup menu screen I. Press the SET button for 2 second The menu screen will appear on the monitor as the block shown above. II. Using the cursor button Use the cursor button or to move the cursor up or down. Use the cursor button or to adjust the mode or parame...

Page 9 - MENU Flow

7 MENU Flow 4. MAIN MENU FLOW ADVANCED SETUP > AUTO IRIS… WHITE BALANCE… LINELOCK… VIEWING… PREVIOUS PAGE EWD600 MAIN MENU >PRESET MODE… <INDOOR…> <OUTDOOR…> <FLUOR. ….> <BACKLIGHT…> <USER…> EWD600 MAIN MENU >CAMERA ID… < OFF> <ON…> SAVE/RESTORE >...

Page 10 - MENU

8 MENU 5. PRESET MODE I. Select the suitable settings, such as INDOOR, OUTDOOR, FLUOR. or BACKLIGHT based on the installation environment. II. Press the SET button to enter USER SETUP menu for adjusting the parameters. III. The parameters will be stored as USER automatically after changed. 5.1 USER ...

Page 12 - same setting procedures as “ NORMAL”.

10 Select “ BACKLIGHT” in the strong backlight environment, for example, the lighting condition of building lobby. Set a suitable location or size of the frame by using the same setting procedures as “ NORMAL”. V. PREVIOUS PAGE: Return to the previous page by selecting PREVIOUS PAGE.

Page 13 - Appendix A

11 MENU 6. CAMERA ID 6.1 CAMERA ID: The camera ID can be turned “ON” to be displayed on the screen, or “OFF”. The default camera ID is “OFF”. When “ON” is selected, user can set the Camera ID up to 12 characters. Please refer to Appendix A for detail character patterns. Use the cursor button or to l...

Page 14 - There are four positions can be chosen to show the CAMERA ID on the

12 MENU 6.2 ID POSITION: There are four positions can be chosen to show the CAMERA ID on the screen. Choose an ID position that will not cover the import/critical part of images. 6.3 ID COLOR To make the CAMERA ID more visible on the screen, four colors for the characters can be chosen. 6.4 ID BACKG...

Page 17 - VIEWING

15 MENU 7.3LINELOCK I.AUTO: Set as AUTO LINELOCK mode,it will auto sense the line signal to decision whether runnig LINELOCK function or not. And press SET user can into the adjustment manual of V PHASE use button or to select the V PHASE from 0~624. The larger the V Phase parameter, the more delay ...

Page 20 - CAMERA ID Character patterns

Page 22 - Head Office; Taiwan; USA Office; Germany; Japan Office

EverFocus Electronics Corp. Head Office 12F, No.79, Sec.1, Shin-Tai Wu Road, Hsi-Chi, Taipei Hsien, Taiwan Tel:886-2-26982334 Fax:886-2-26982380 e-mail: [email protected] Website: http://www.everfocus.com.tw USA Office 2445 Huntington Drive, San Marino, CA 91108, U.S.A. Tel: (626)844-8888 F...