EverFocus Eq250 - Manuals

4 HARDWARE OVERVIEW Front 8 2 1 Side Back Side 3 6 7 4 5 10 11 9 11 10 9 9 Dual Power Model with Audio Pigtail Power Model with Audio Pigtail Power Model without Audio Dual Power Model without Audio

5 1. C/CS mount Focus Switch Ring Use this ring to adjust the appropriate focal length according to the type of lens. Rotate the ring clockwise for the CS-mount lens, rotate it counterclockwise for the C-mount lens. The factory setting is CS-mount. 2. Lens Mount To mount an appropriate C-mount or CS...

6 8. Mounting Base and Fixing Screws The mounting base can be attached to either the top or the bottom of the camera, fix the mounting base onto the camera by using the 4 fixing screws in the accessory pack. 9. Video Output Connector BNC VBS 1.0 Vp-p, 75ohm 10. Power Cable (EQ series) Power cable va...

7 INSTALLATION 1. Remove the lens cover cap. 2. If a C-mount lens is used, please make sure to turn the C-mount/CS-mount focus switch ring at C position before fixing the lens . The default is CS mount. 3. Screw the lens firmly onto the lens mount. Insert the lens plug into the DC lens connector if ...

8 Camera Setting DIP Switch Fluorescent ON/OFF This is a compensation function for against the images flicker fiercely during fluorescent light condition. Shooting the images in fluorescent light by using turn on the Fluorescent function, the default setting is Off. BLC (Back Light Compensation) ON/...

10 EverFocus Electronics Corp. Head Office: 12F, No.79 Sec. 1 Shin-Tai Wu Road, Hsi-Chih, Taipei, Taiwan TEL: +886-2-26982334 FAX: +886-2-26982380 www.everfocus.com.tw USA L.A. Office: 1801 Highland Ave. Unit A Duarte, CA 91010, U.S.A. TEL: +1-626-844-8888 FAX: +1-626-844-8838 www.everfocus.com USA ...