EverFocus EN-7542H - Manuals

Page 4 - INSTRUCTION MANUAL ............................................................................... 1; Important Safety Instruction; these

INSTRUCTION MANUAL ……………………………………………………………………. 1 Important Safety Instruction 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Ins...

Page 5 - ............................................................................... INSTRUCTION MANUAL; such as vases, shall be placed no the apparatus.

bsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles and the point where they exit from the apparatus. 11. Only use attachment/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket or table s...

Page 6 - INSTRUCTION MANUAL ............................................................................... 3; CAUTION; located/installed near the equipment and is easily accessible.; ATTENTION; située ou installée à proximité du matériel et être facile d`accès

This symbol is intended to alert the user to the presence of uninsulated : dangerous voltage with in the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and mai...

Page 7 - ............................................................................... INSTRUCTION MANUAL

NEVER REMOVE THE BACK COVER Removal of the back cover should be carried out only by qualified personnel. DO NOT USE IN HOSTILE ENVIRONMENTS To prevent shock or fire hazard, do not expose the unit to rain or moisture. This unit is designed to be used in the office or home. Do not subject the unit to ...

Page 8 - DOC COMPLIANCE NOTICE; INSTRUCTION MANUAL ............................................................................... 5

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate...

Page 9 - A. BACK PANEL CONTROL

A. BACK PANEL CONTROL 1. HDMI IN 2. DVI IN 3. PC VGA IN 4. PC STEREO IN 5. AUDIO OUT 6. COMPONENT IN 7. COMPONENT AUDIO L/R IN 8. Trigger Input 9. AV 1 IN Composite signal input for AV 1 10. AV 1 OUT Video looping out for AV 1 11. AV 2 IN Composite signal input for AV 2 12. AV 2 OUT Video looping ou...

Page 10 - ............................................................................... INSTRUCTION MANUAL; B. REMOTE CONTROLLER

6 ……………………………………………………………………. INSTRUCTION MANUAL B. REMOTE CONTROLLER 1. POWER( ) Turn the power ON or OFF. There will be a few seconds delay before the display appears. 2. SOURCE Select pc or video(AV1/AV2/S-Video/Component/HDMI/DVI/PC) sources. 3. AUTO Auto geometry adjustment in PC Source. 4. HOL...

Page 11 - INSTRUCTION MANUAL ............................................................................... 7; C. FRONT KEY CONTROL; Remote controller sensor.

INSTRUCTION MANUAL ……………………………………………………………………. 7 C. FRONT KEY CONTROL 1. SOURCE/SELECT Select PC or video. Select On Screen Display menu. 2. MENU Activate and exit the On Screen Display. 3 / 4. ▼ / ▲ These buttons allow user to enter the sub-menu of the activated function. The up( ▲ ) button is HOLD...

Page 12 - ) Press the MENU button and then press the up(; Brightness; : Increase or decrease the intensity of the image.

9. POWER LED The power LED lights with green when the power is turned ON. The power is turned off by pressing the power switch again and the power LED goes Red. 8 ……………………………………………………………………. INSTRUCTION MANUAL OSD MENU DESCRIPTION A: CUSTOM MENU (Only Video Input) 1) Press the MENU button and then p...

Page 13 - INSTRUCTION MANUAL ............................................................................... 9

A: CUSTOM MENU (For HDMI, DVI & PC Input) 1) Press the MENU button and then press the up( ▲ ) or down( ▼ ) button to select the Custom. 2) Press the up( ▲ ) or down( ▼ ) button to select the sub menu. 3) Press the left(◀) or right( ▶ ) button to adjust the picture setting. 4) Press the MENU butt...

Page 14 - 0 ............................................................................... INSTRUCTION MANUAL

1) Press the MENU button and then press the up( ▲ ) or down( ▼ ) button to select the Picture / Sound. 2) Press the right( ▶ ) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Picture Mode. 4) Press the right( ▶ ) or SOURCE/SELECT button. 5) Press the up( ▲ ) or down( ...

Page 15 - ) button to select the Volume

3. Mute 1) Press the up( ▲ ) or down( ▼ ) button to select the Mute. 2) Press the right( ▶ ) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off. 4) Press the MENU button to save. 4. Volume 1) Press the up( ▲ ) or down( ▼ ) button to select the Volume 2) Press t...

Page 16 - INSTRUCTION MANUAL ............................................................................... 11; ) button to select the Size

INSTRUCTION MANUAL ……………………………………………………………………. 11 5. Size 1) Press the up( ▲ ) or down( ▼ ) button to select the Size 2) Press the right( ▶) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Size option. 4) Press the MENU button to save. 6. NR

Page 17 - 2 ............................................................................... INSTRUCTION MANUAL

1) Press the up( ▲ ) or down( ▼ ) button to select the NR. 2) Press the right( ▶) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off. 4) Press the MENU button to save. 12 ……………………………………………………………………. INSTRUCTION MANUAL 7. 3D Comb

Page 19 - ) button to select the Picture Mode option.; INSTRUCTION MANUAL ............................................................................... 13

5) Press the up( ▲ ) or down( ▼ ) button to select the Picture Mode option. 6) Press the MENU button to save. INSTRUCTION MANUAL ……………………………………………………………………. 13 2-1. Color Tone 1) Press the up( ▲ ) or down( ▼ ) button to select the Color Tone. 2) Press the right( ▶) or SOURCE/SELECT button.

Page 20 - ) button to select the Color Tone option.; 4 ............................................................................... INSTRUCTION MANUAL; ) button to select the Custom in the Color Tone.

3) Press the left( ▶) or SOURCE/SELECT button again. 4) Press the up( ▲ ) or down( ▼ ) button to select the Color Tone option. 5) Press the MENU button to save. 14 ……………………………………………………………………. INSTRUCTION MANUAL 2-2. Color Tone (Custom) 1) Press the up( ▲ ) or down( ▼ ) button to select the Custom in...

Page 21 - INSTRUCTION MANUAL ............................................................................... 15

3) Press the up( ▲ ) or down( ▼ ) button to select the Red(R), Green(G) or Blue(B). 4) Press the left(◀) or right( ▶) button to adjust color density. 5) Press the MENU button to save. INSTRUCTION MANUAL ……………………………………………………………………. 15 3. Size

Page 22 - Input; Auto geometry adjustment.

1) Press the up( ▲ ) or down( ▼ ) button to select the Size. 2) Press the right( ▶) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Size option. 4. PC control (Only PC Input ) 1) Press the up( ▲ ) or down( ▼ ) button to select the PC. 2) Press the right( ▶) or SOURCE/...

Page 23 - 6 ............................................................................... INSTRUCTION MANUAL

Phase: Adjust the number of horizontal picture elements. H-Position: Move image horizontally on screen right or left. V-Position: Move image vertically on screen up or down. Frequency: Adjust the vertical noise of screen image. 16 ……………………………………………………………………. INSTRUCTION MANUAL C. PIP MENU (Only Vide...

Page 24 - INSTRUCTION MANUAL ............................................................................... 17

2) Press up( ▲ ) or down( ▼ ) button to select the On or Off. 3) Press the MENU button to save. INSTRUCTION MANUAL ……………………………………………………………………. 17 2. Input Source 1) Press the up( ▲ ) or down( ▼ ) button to select the Input Source. 2) Press the right( ▶ ) or SOURCE/SELECT button. 3) Press the up( ▲ )...

Page 25 - 8 ............................................................................... INSTRUCTION MANUAL

3. Size 1) Press the up( ▲ ) or down( ▼ ) button to select the Size. 2) Press the right( ▶ ) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Size option. 4) Press the MENU button to save. 18 ……………………………………………………………………. INSTRUCTION MANUAL 4. Position

Page 26 - ) or SOURCE/SELECT button to swap the main image for the sub one.

1) Press the up( ▲ ) or down( ▼ ) button to select the Position. 2) Press the right( ▶ ) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Position option. 4) Press the MENU button to save. 5. Swap 1) Press the up( ▲ ) or down( ▼ ) button to select the Swap. 2) Press th...

Page 27 - INSTRUCTION MANUAL ............................................................................... 19; ) button to select the Sound Select option.

INSTRUCTION MANUAL ……………………………………………………………………. 19 5. Sound Select 1) Press the up( ▲ ) or down( ▼ ) button to select the Sound Select. 2) Press the right( ▶ ) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Sound Select option. 4) Press the MENU button to save. C. PIP...

Page 28 - ) button to select the Input Source option.; 0 ............................................................................... INSTRUCTION MANUAL

1) Press the up( ▲ ) or down( ▼ ) button to select the Input Source. 2) Press the right( ▶ ) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Input Source option. 4) Press the MENU button to save. 20 ……………………………………………………………………. INSTRUCTION MANUAL D. SETUP MENU 1) Press...

Page 29 - Reset; : All settings go to the factory initialization.; INSTRUCTION MANUAL ............................................................................... 21

1) Press the right( ▶ ) or SOURCE/SELECT button 2) Press the right( ▶ ) or SOURCE/SELECT button again. 3) Press SOURCE/SELECT button to execute the reset. Reset : All settings go to the factory initialization. INSTRUCTION MANUAL ……………………………………………………………………. 21 2. Language

Page 30 - 2 ............................................................................... INSTRUCTION MANUAL

1) Press the up( ▲ ) or down( ▼ ) button to select the Language. 2) Press the right( ) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select language. 4) Press the MENU button to save. 3. OSD Tone 1) Press the up( ▲ ) or down( ▼ ) button to select the OSD Tone. 2) Press the rig...

Page 32 - INSTRUCTION MANUAL ............................................................................... 23

INSTRUCTION MANUAL ……………………………………………………………………. 23 6. Trigger 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger. 2) Press the right( ) or SOURCE/SELECT button. 6-1. Trigger Enable 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Enable. 2) Press the right( ) or SOURCE/SELEC...

Page 33 - 4 ............................................................................... INSTRUCTION MANUAL; ) button to select the Trigger Input option.

24 ……………………………………………………………………. INSTRUCTION MANUAL 6-2. Trigger Input 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Input . 2) Press the right( ) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Input option. 4) Press the Menu button to save. 6-...

Page 34 - INSTRUCTION MANUAL ............................................................................... 25; ) button to select the Trigger Option setting.

INSTRUCTION MANUAL ……………………………………………………………………. 25 6-4. Trigger Time 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Time. 2) Press left( ) or right( ) button to adjust Trigger Time setting. 3) Press the MENU button to save. 6-5 Trigger Option 1) Press the up( ▲ ) or down( ▼ ) button t...

Page 35 - 6 ............................................................................... INSTRUCTION MANUAL; ) button to select the Display Type option.

N/C (Normal Closed): When Trigger cable is opened, Trigger function is activated. N/O (Normal Opened): When Trigger cable is closed, Trigger function is activated. High: When Trigger signal is high(2~5[V]), Trigger function is activated. Low: When Trigger signal is low(0~0.6[V]), Trigger function is...

Page 36 - INSTRUCTION MANUAL ............................................................................... 27

The Type of Image 2 : Component, HDMI, DVI or PC. INSTRUCTION MANUAL ……………………………………………………………………. 27 7. Auto switching 1) Press the up( ▲ ) or down( ▼ ) button to select the Auto switching. 2) Press the right( ) or SOURCE/SELECT button. 7-1. Auto switching On/Off

Page 37 - 8 ............................................................................... INSTRUCTION MANUAL

1) Press the right( ) or SOURCE/SELECT button. 2) Press the up( ▲ ) or down( ▼ ) button to select the On or Off . 3) Press the Menu button to save. 28 ……………………………………………………………………. INSTRUCTION MANUAL 7-2. Auto switching Inputs enabled

Page 38 - INSTRUCTION MANUAL ............................................................................... 29

1) Press the up( ▲ )or down( ▼ ) button to select the Inputs enabled. 2) Press the right( ) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Input. 4) Press the right( ) or SOURCE/SELECT button. 1) Press the up( ▲ ) or down( ▼ ) button to select the On or Off. 2) Press...

Page 39 - Image Rotation; support; Image persistence

1) Press the up( ▲ ) or down( ▼ ) button to select the Time. 2) Press the left( ) or right( ) button to adjust the Time setting. 3) Press the MENU button to save. 8. Image Rotation 1) Press the up( ▲ ) / down( ▼ ) button to select the Image Rotation. 2) Press the right( ▶ ) or ENTER button. ※ Image ...

Page 40 - 0 ............................................................................... INSTRUCTION MANUAL

30 ……………………………………………………………………. INSTRUCTION MANUAL 8-1. Image Rotation On/Off 1) Press the right( ▶ ) or SOURCE/SELECT button. 2) Press the up( ▲ ) or down( ▼ ) button to select the On or Off . 3) Press the Menu button to save. 8-2. Image Rotation Min(Time control) 1) Press the up( ▲ ) or down( ▼ ) b...

Page 41 - INSTRUCTION MANUAL ............................................................................... 31; Wall-mount Installation

INSTRUCTION MANUAL ……………………………………………………………………. 31 Using the wall mount design and the (130x130)x634 hole pattern on the back panel to install the LCD monitor to the wall. Wall-mount Installation 1. The Monitor fixing bracket to the monitor using the fixing screws provided. 2. The monitor fixing brac...

Page 42 - 2 ............................................................................... INSTRUCTION MANUAL

Page 43 - INSTRUCTION MANUAL ............................................................................... 33; User’s Manual

▶ PIN ASSIGNMENTS Pin 1 RED VIDEO 9 2 GREEN VIDEO 10 SIGNAL CABLE DETECT 3 BLUE VIDEO 11 GROUND 4 GROUND 12 SDA(for DDC) 5 GROUND 13 H-SYNC.(or H+V SYNC.) 6 RED GROUND 14 V-SYNC. 7 GREEN GROUND 15 SCL(for DDC) 8 BLUE GROUND ▶ ACCESSORY INSTRUCTION MANUAL ……………………………………………………………………. 33 3. Remote Cont...

Page 44 - LED INDICATOR; GREEN Normal; 4 ............................................................................... INSTRUCTION MANUAL

This monitor features a power management system to “power down” upon receipt of the VESA DPMS(The display power management signaling) from a VESA DPMS video card. The VESA DPMS-compliant video card performs this signaling system through not sending horizontal, vertical, or sync signal. This monitor ...

Page 45 - Technical specifications are subject to change without notice.

42’’ WXGA 42’’ WUXGA 42 ˝ Diagonal AM-TFT(Active-Matrix) 42 ˝ Diagonal AM-TFT(Active-Matrix) Pixel pitch(mm) : 0.681mm(H) x 0.681mm(V) Pixel pitch(mm) : 0.4845mm(H) x 0.4845mm(V) BRIGHTNESS: 500cd/ ㎡ (Typical) BRIGHTNESS: 500cd/ ㎡ (Typical) CONTRAST RATIO: 1100:1(Typical) CONTRAST RATIO: 1300:1(Typi...

Page 46 - INSTRUCTION MANUAL ............................................................................... 35; WEEE Symbols

INSTRUCTION MANUAL ……………………………………………………………………. 35 WEEE Symbols

Page 47 - 6 ............................................................................... INSTRUCTION MANUAL

36 ……………………………………………………………………. INSTRUCTION MANUAL Correct Disposal of This Product(Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it shou...