EverFocus EN-7522C - Manuals

Page 3 - INSTRUCTION MANUAL ............................................................................... 1; Important Safety Instruction; these

INSTRUCTION MANUAL ……………………………………………………………………. 1 Important Safety Instruction 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Ins...

Page 4 - ............................................................................... INSTRUCTION MANUAL; such as vases, shall be placed no the apparatus.

13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects ha...

Page 5 - INSTRUCTION MANUAL ............................................................................... 3; CAUTION; located/installed near the equipment and is easily accessible.; ATTENTION; située ou installée à proximité du matériel et être facile d`accès

This symbol is intended to alert the user to the presence of uninsulated : dangerous voltage with in the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and mai...

Page 6 - ............................................................................... INSTRUCTION MANUAL

NEVER REMOVE THE BACK COVER Removal of the back cover should be carried out only by qualified personnel. DO NOT USE IN HOSTILE ENVIRONMENTS To prevent shock or fire hazard, do not expose the unit to rain or moisture. This unit is designed to be used in the office or home. Do not subject the unit to ...

Page 7 - DOC COMPLIANCE NOTICE; INSTRUCTION MANUAL ............................................................................... 5

communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the i...

Page 8 - A. BOTTOM PANEL CONTROL; ............................................................................... INSTRUCTION MANUAL

A. BOTTOM PANEL CONTROL 1. VIDEO2(AV2) OUT 2. VIDEO2(AV2) IN 3. VIDEO1(AV1) OUT 4. VIDEO1(AV1) IN 5. TRIGGER INPUT 6, 7. AUDIO IN(R+L) for AV1, AV2 and S-VIDEO 8. S-VIDEO(Y/C) IN 9. AUDIO OUT(Speaker) 10. PC STEREO IN 11. VGA(D-SUB) IN 12. DVI IN 13. HDMI IN 14. DC 12V IN 6 …………………………………………………………………...

Page 9 - INSTRUCTION MANUAL ............................................................................... 7

B. REMOTE CONTROLLER(Option) 1. POWER( ) Turn the power ON or OFF. There will be a few seconds delay before the display appears. 2. SOURCE Select pc or video(AV1/AV2/S-Video/HDMI/DVI/PC) sources. 3. AUTO Auto geometry adjustment in PC Source. 4. HOLD Stop the Trigger & Auto switching functions. ...

Page 10 - C. FRONT KEY CONTROL; Activate and exit the On Screen Display.

C. FRONT KEY CONTROL 1. SOURCE/ Select PC or video. Select On Screen Display menu. 2. MENU/EXIT Activate and exit the On Screen Display. 3, 4. AUTO/ ▼ , ▲ These buttons allow user to enter the sub-menu of the activated function. The up( ▲ ) button is HOLD function and stop the Trigger & Auto swi...

Page 11 - ............................................................................... INSTRUCTION MANUAL; ) Press the MENU button and then press the up(; Brightness; : Increase or decrease the intensity of the image.

8 ……………………………………………………………………. INSTRUCTION MANUAL OSD MENU DESCRIPTION A: Custom Menu (Only Video Input) 1) Press the MENU button and then press the up( ▲ ) or down( ▼ ) button to select the Custom. 2) Press the up( ▲ ) or down( ▼ ) button to select the sub menu. 3) Press the left(◀) or right( ▶ ) bu...

Page 12 - INSTRUCTION MANUAL ............................................................................... 9

INSTRUCTION MANUAL ……………………………………………………………………. 9 A: Custom Menu (For RGB-PC & HDMI Input) 1) Press the MENU button and then press the up( ▲ ) or down( ▼ ) button to select the Custom. 2) Press the up( ▲ ) or down( ▼ ) button to select the sub menu. 3) Press the left(◀) or right( ▶ ) button to ad...

Page 13 - 0 ............................................................................... INSTRUCTION MANUAL

10 ……………………………………………………………………. INSTRUCTION MANUAL B. Picture / Sound Menu (Only Video Input) 1. Picture Mode

Page 15 - INSTRUCTION MANUAL ............................................................................... 11

INSTRUCTION MANUAL ……………………………………………………………………. 11 2-1. Color Tone 1) Press the up( ▲ ) or down( ▼ ) button to select the Color Tone. 2) Press the right( ▶) or SOURCE/ button.

Page 16 - ) button to select the Color Tone option.; 2 ............................................................................... INSTRUCTION MANUAL

3) Press the right( ▶) or SOURCE/ button again. 4) Press the up( ▲ ) or down( ▼ ) button to select the Color Tone option. 5) Press the MENU button to save. 12 ……………………………………………………………………. INSTRUCTION MANUAL 2-2. Color Tone (User)

Page 18 - INSTRUCTION MANUAL ............................................................................... 13

INSTRUCTION MANUAL ……………………………………………………………………. 13 3. Mute 1) Press the up( ▲ ) or down( ▼ ) button to select the Mute. 2) Press the right( ▶ ) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off. 4) Press the MENU button to save.

Page 19 - 4 ............................................................................... INSTRUCTION MANUAL; ) button to select the Volume

14 ……………………………………………………………………. INSTRUCTION MANUAL 4. Volume 1) Press the up( ▲ ) or down( ▼ ) button to select the Volume 2) Press the left (◀) or right( ▶ ) button to adjust Volume setting. 3) Press the MENU button to save.

Page 20 - INSTRUCTION MANUAL ............................................................................... 15; ) button to select the Size

INSTRUCTION MANUAL ……………………………………………………………………. 15 5. Size 1) Press the up( ▲ ) or down( ▼ ) button to select the Size 2) Press the right( ▶) or SOURCE/ button.

Page 21 - 6 ............................................................................... INSTRUCTION MANUAL

3) Press the up( ▲ ) or down( ▼ ) button to select the Size option. 4) Press the MENU button to save. 16 ……………………………………………………………………. INSTRUCTION MANUAL 6. NR (Noise Reduction)

Page 23 - INSTRUCTION MANUAL ............................................................................... 17

INSTRUCTION MANUAL ……………………………………………………………………. 17 7. 3D Comb 1) Press the up( ▲ ) or down( ▼ ) button to select the 3D Comb. 2) Press the right( ▶) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off. 4) Press the MENU button to save.

Page 24 - 8 ............................................................................... INSTRUCTION MANUAL

18 ……………………………………………………………………. INSTRUCTION MANUAL B. Picture / Sound Menu (For RGB-PC & HDMI Input) 1. Size 1) Press the up( ▲ ) or down( ▼ ) button to select the Size. 2) Press the right( ▶) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Size option.

Page 25 - INSTRUCTION MANUAL ............................................................................... 19; Input

INSTRUCTION MANUAL ……………………………………………………………………. 19 2. PC (Only RGB-PC Input ) 1) Press the up( ▲ ) or down( ▼ ) button to select the PC.

Page 26 - 0 ............................................................................... INSTRUCTION MANUAL

2) Press the right( ▶) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the PC sub menu. 4) Press the right( ▶ ) or SOURCE/ button. 5) Press the left (◀) or right( ▶ ) button to adjust the PC setting. 6) Press the MENU button to save. Auto Adjust: Auto geometry adjustment. Phase...

Page 28 - INSTRUCTION MANUAL ............................................................................... 21; Possible PIP Combination

INSTRUCTION MANUAL ……………………………………………………………………. 21 2. Input Source 1) Press the up( ▲ ) or down( ▼ ) button to select the Input Source. 2) Press the right( ▶ ) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Source option. 4) Press the MENU button to save. ※ Possible PIP Com...

Page 29 - 2 ............................................................................... INSTRUCTION MANUAL

Main Sub RGB PC or HDMI RGB PC or HDMI 22 ……………………………………………………………………. INSTRUCTION MANUAL 3. PIP Mode 1) Press the up( ▲ ) or down( ▼ ) button to select the PIP Mode. 2) Press the right( ▶ ) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the PIP Mode option. 4) Press the MENU b...

Page 30 - INSTRUCTION MANUAL ............................................................................... 23

※ PBP1 Main image Sub image ※ PBP2 Main image Sub image INSTRUCTION MANUAL ……………………………………………………………………. 23 4. PIP Size

Page 32 - 4 ............................................................................... INSTRUCTION MANUAL

24 ……………………………………………………………………. INSTRUCTION MANUAL 5. Position 1) Press the up( ▲ ) or down( ▼ ) button to select the Position. 2) Press the right( ▶ ) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Position option. 4) Press the MENU button to save. ※ RB: Right of Bottom, L...

Page 33 - INSTRUCTION MANUAL ............................................................................... 25; button to swap the main image for the sub one.

INSTRUCTION MANUAL ……………………………………………………………………. 25 6. Swap 1) Press the up( ▲ ) or down( ▼ ) button to select the Swap. 2) Press the right( ▶ ) or SOURCE/ button to swap the main image for the sub one.

Page 34 - 6 ............................................................................... INSTRUCTION MANUAL

26 ……………………………………………………………………. INSTRUCTION MANUAL 7. Sound Select 1) Press the up( ▲ ) or down( ▼ ) button to select the Sound Select.

Page 35 - ) button to select the Sound Select option.; INSTRUCTION MANUAL ............................................................................... 27

2) Press the right( ▶ ) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Sound Select option. 4) Press the MENU button to save. INSTRUCTION MANUAL ……………………………………………………………………. 27 D. Setup Menu

Page 36 - Reset; : All settings go to the factory initialization.; 8 ............................................................................... INSTRUCTION MANUAL

1) Press the MENU button and then press the up( ▲ ) or down( ▼ ) button to select the Setup. 1. Reset 1) Press the right( ▶ ) or SOURCE/ button 2) Press the right( ▶ ) or SOURCE/ button again. 3) Press SOURCE/ button to execute the reset. Reset : All settings go to the factory initialization. 28 ………...

Page 37 - INSTRUCTION MANUAL ............................................................................... 29

2. Language 1) Press the up( ▲ ) or down( ▼ ) button to select the Language. 2) Press the right( ) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select language. 4) Press the MENU button to save. INSTRUCTION MANUAL ……………………………………………………………………. 29

Page 38 - button; 0 ............................................................................... INSTRUCTION MANUAL

3. OSD Tone 1) Press the up( ▲ ) or down( ▼ ) button to select the OSD Tone. 2) Press the right( ) or SOURCE/ button 3) Press the up( ▲ ) or down( ▼ ) button to select the OSD Tone option. 4) Press the MENU button to save. 30 ……………………………………………………………………. INSTRUCTION MANUAL

Page 39 - INSTRUCTION MANUAL ............................................................................... 31

4. Blue Screen 1) Press the up( ▲ ) or down( ▼ ) button to select the Blue Screen. 2) Press the right( ) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off. 4) Press the MENU button to save. INSTRUCTION MANUAL ……………………………………………………………………. 31

Page 40 - 2 ............................................................................... INSTRUCTION MANUAL

5. Key Lock 1) Press the up( ▲ ) or down( ▼ ) button to select the Key Lock. 2) Press the right( ) or SOURCE/ button 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off 4) Press the MENU button to save. 32 ……………………………………………………………………. INSTRUCTION MANUAL

Page 41 - INSTRUCTION MANUAL ............................................................................... 33

6. Trigger 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger. 2) Press the right( ) or SOURCE/ button. 6-1. Trigger Enable 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Enable. 2) Press the right( ) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select t...

Page 42 - ) button to select the Trigger Input option.; 4 ............................................................................... INSTRUCTION MANUAL

6-2. Trigger Input 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Input . 2) Press the right( ) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Input option. 4) Press the Menu button to save. 34 ……………………………………………………………………. INSTRUCTION MANUAL

Page 43 - INSTRUCTION MANUAL ............................................................................... 35

6-3. Buzzer 1) Press the up( ▲ ) or down( ▼ ) button to select the Buzzer. 2) Press the right( ) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off. 4) Press the Menu button to save. INSTRUCTION MANUAL ……………………………………………………………………. 35

Page 44 - 6 ............................................................................... INSTRUCTION MANUAL

6-4. Trigger Time 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Time. 2) Press left( ) or right( ) button to adjust Trigger Time setting. 3) Press the MENU button to save. 36 ……………………………………………………………………. INSTRUCTION MANUAL

Page 45 - ) button to select the Trigger Option setting.; INSTRUCTION MANUAL ............................................................................... 37

6-5 Trigger Option 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Option. 2) Press the right( ) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Option setting. 4) Press the Menu button to save. N/C (Normal Closed): When Trigger cable is opened, Trigg...

Page 46 - 8 ............................................................................... INSTRUCTION MANUAL

6-6. Display Type 1) Press the up( ▲ ) or down( ▼ ) button to select the Display Type. 2) Press the right( ) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Display Type option. 4) Press the Menu button to save. PIP & FULL: When the condition is below, the Trigger Input...

Page 47 - INSTRUCTION MANUAL ............................................................................... 39

7. Auto switching 1) Press the up( ▲ ) or down( ▼ ) button to select the Auto switching. 2) Press the right( ) or SOURCE/ button. 7-1. Auto switching On/Off 1) Press the right( ) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off . 4) Press the Menu button to save. I...

Page 48 - 0 ............................................................................... INSTRUCTION MANUAL

7-2. Auto switching Input enabled 1) Press the up( ▲ )or down( ▼ ) button to select the Inputs enabled. 2) Press the right( ) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Input. 4) Press the right( ) or SOURCE/ button. 5) Press the up( ▲ ) or down( ▼ ) button to select t...

Page 49 - INSTRUCTION MANUAL ............................................................................... 41

7-3. Auto switching Time 1) Press the up( ▲ ) or down( ▼ ) button to select the Time. 2) Press the left( ) or right( ) button to adjust the Time setting. 3) Press the MENU button to save. INSTRUCTION MANUAL ……………………………………………………………………. 41

Page 51 - 2 ............................................................................... INSTRUCTION MANUAL; PIN ASSIGNMENTS

42 ……………………………………………………………………. INSTRUCTION MANUAL ▶ PIN ASSIGNMENTS Pin 1 RED VIDEO 9 2 GREEN VIDEO 10 SIGNAL CABLE DETECT 3 BLUE VIDEO 11 GROUND 4 GROUND 12 SDA(for DDC) 5 GROUND 13 H-SYNC.(or H+V SYNC.) 6 RED GROUND 14 V-SYNC. 7 GREEN GROUND 15 SCL(for DDC) 8 BLUE GROUND ▶ ACCESSORIES 1. Power cor...

Page 52 - INSTRUCTION MANUAL ............................................................................... 43; MODE; BLUE Normal; POWER OFF; RED Not

INSTRUCTION MANUAL ……………………………………………………………………. 43 This monitor features a power management system to “power down” upon receipt of the VESA DPMS(The display power management signaling) from a VESA DPMS video card. The VESA DPMS-compliant video card performs this signaling system through not sending h...

Page 53 - 4 ............................................................................... INSTRUCTION MANUAL; FREQUENCY; HDMI(High Definition Multimedia Interface); INPUT SIGNAL; Audio Out

44 ……………………………………………………………………. INSTRUCTION MANUAL 22 ” 22 ˝ Diagonal AM-TFT(Active-Matrix) Pixel pitch(mm) : 0.282(H) x 0.282(V) BRIGHTNESS: 300cd/ ㎡ (Typical) CONTRAST RATIO: 1000:1(Typical) VIEWING ANGLE: 160 ° /160 ° (H/V) LCD-Type RESPONSE TIME: 5msec(Typical) RESOLUTION (H x V) 1680X1050@60Hz F...

Page 54 - INSTRUCTION MANUAL ............................................................................... 45

ACTIVE DISPLAY AREA (H x V) 473.76 mm X 296.1 mm (18.65” X 11.65”) PACKING DIMENSIONS (W x D x H) 650 mm X 205 mm X 545 mm (25.59” X 8.07” X 21.45”) Net Weight : 5.83kg (12.83 Ibs) WEIGHT Gross Weight : 8.42kg (18.52 Ibs) ELECTRICAL RATINGS DC 12V / 5.83A ▶▶ NOTE : Technical specifications are subje...

Page 55 - WEEE Symbols; 6 ............................................................................... INSTRUCTION MANUAL

WEEE Symbols 46 ……………………………………………………………………. INSTRUCTION MANUAL Correct Disposal of This Product(Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates...