EverFocus EN-7517C - Manuals

Page 4 - INSTRUCTION MANUAL ............................................................................... 1; Important Safety Instruction; these

INSTRUCTION MANUAL ……………………………………………………………………. 1 Important Safety Instruction 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Ins...

Page 5 - ............................................................................... INSTRUCTION MANUAL; such as vases, shall be placed no the apparatus.

receptacles and the point where they exit from the apparatus. 11. Only use attachment/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart...

Page 6 - INSTRUCTION MANUAL ............................................................................... 3; CAUTION; located/installed near the equipment and is easily accessible.; ATTENTION; située ou installée à proximité du matériel et être facile d`accès

This symbol is intended to alert the user to the presence of uninsulated : dangerous voltage with in the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and mai...

Page 7 - ............................................................................... INSTRUCTION MANUAL

NEVER REMOVE THE BACK COVER Removal of the back cover should be carried out only by qualified personnel. DO NOT USE IN HOSTILE ENVIRONMENTS To prevent shock or fire hazard, do not expose the unit to rain or moisture. This unit is designed to be used in the office or home. Do not subject the unit to ...

Page 8 - DOC COMPLIANCE NOTICE; INSTRUCTION MANUAL ............................................................................... 5

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate...

Page 10 - ............................................................................... INSTRUCTION MANUAL

6 ……………………………………………………………………. INSTRUCTION MANUAL C. REMOTE CONTROLLER (Option) 1. POWER( ) Turn the power ON or OFF. There will be a few seconds delay before the display appears. 2. SOURCE Select pc or video(AV1/AV2/S-Video/Component/HDMI/DVI/PC) sources. 3. AUTO Auto geometry adjustment in PC Sourc...

Page 11 - INSTRUCTION MANUAL ............................................................................... 7; D. FRONT KEY CONTROL; Adjust the volume and menu settings.

Select AV mode.(AV1, AV2 & S-VIDEO). 24. COMP Select COMPONENT mode. INSTRUCTION MANUAL ……………………………………………………………………. 7 D. FRONT KEY CONTROL 1 / 2. VOL Adjust the volume and menu settings. 3 / 4. ▲ / ▼ These buttons allow user to enter the sub-menu of the activated function. The up( ▲ ) button is ...

Page 12 - ............................................................................... INSTRUCTION MANUAL; ) Press the MENU button and then press the up(; Brightness; : Increase or decrease the intensity of the image.

9. POWER LED The power LED lights with green when the power is turned ON. The power is turned off by pressing the power switch again and the power LED goes Red. 8 ……………………………………………………………………. INSTRUCTION MANUAL OSD MENU DESCRIPTION A: CUSTOM MENU (Only Video Input) 1) Press the MENU button and then p...

Page 13 - INSTRUCTION MANUAL ............................................................................... 9

Tint: Increase or decrease the tint of the picture. Sharpness: Increase or decrease the sharpness of the picture. A: CUSTOM MENU (For HDMI, DVI & PC Input) 1) Press the MENU button and then press the up( ▲ ) or down( ▼ ) button to select the Custom. 2) Press the up( ▲ ) or down( ▼ ) button to se...

Page 15 - 0 ............................................................................... INSTRUCTION MANUAL

4) Press the MENU button to save. 10 ……………………………………………………………………. INSTRUCTION MANUAL 3. Mute 1) Press the up( ▲ ) or down( ▼ ) button to select the Mute. 2) Press the right( ▶ ) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off. 4) Press the MENU button to save...

Page 16 - ) button to select the Volume; INSTRUCTION MANUAL ............................................................................... 11

1) Press the up( ▲ ) or down( ▼ ) button to select the Volume 2) Press the left (◀) or right( ▶ ) button to adjust Volume setting. 3) Press the MENU button to save. INSTRUCTION MANUAL ……………………………………………………………………. 11 5. Size

Page 17 - ) button to select the Size; 2 ............................................................................... INSTRUCTION MANUAL

1) Press the up( ▲ ) or down( ▼ ) button to select the Size 2) Press the right( ▶) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Size option. 4) Press the MENU button to save. 6. NR 1) Press the up( ▲ ) or down( ▼ ) button to select the NR. 2) Press the right( ▶) or...

Page 19 - ) button to select the Picture Mode option.; INSTRUCTION MANUAL ............................................................................... 13

4) Press the right( ▶ ) or SOURCE/SELECT button. 5) Press the up( ▲ ) or down( ▼ ) button to select the Picture Mode option. 6) Press the MENU button to save. INSTRUCTION MANUAL ……………………………………………………………………. 13 2-1. Color Tone 1) Press the up( ▲ ) or down( ▼ ) button to select the Color Tone. 2) Press...

Page 20 - ) button to select the Color Tone option.; 4 ............................................................................... INSTRUCTION MANUAL

3) Press the left( ▶) or SOURCE/SELECT button again. 4) Press the up( ▲ ) or down( ▼ ) button to select the Color Tone option. 5) Press the MENU button to save. 14 ……………………………………………………………………. INSTRUCTION MANUAL 2-2. Color Tone (Custom)

Page 22 - INSTRUCTION MANUAL ............................................................................... 15; Input

INSTRUCTION MANUAL ……………………………………………………………………. 15 3. Size 1) Press the up( ▲ ) or down( ▼ ) button to select the Size. 2) Press the right( ▶) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Size option. 4. PC control (Only PC Input ) 1) Press the up( ▲ ) or down( ▼ ) ...

Page 23 - 6 ............................................................................... INSTRUCTION MANUAL

4) Press the right( ▶ ) or SOURCE/SELECT button. 5) Press the left (◀) or right( ▶ ) button to adjust the PC setting. 6) Press the MENU button to save. Auto Adjust: Auto geometry adjustment. Phase: Adjust the number of horizontal picture elements. H-Position: Move image horizontally on screen right ...

Page 24 - INSTRUCTION MANUAL ............................................................................... 17

1) Press the right( ▶ ) or SOURCE/SELECT button. 2) Press up( ▲ ) or down( ▼ ) button to select the On or Off. 3) Press the MENU button to save. INSTRUCTION MANUAL ……………………………………………………………………. 17 2. Input Source

Page 26 - 8 ............................................................................... INSTRUCTION MANUAL

18 ……………………………………………………………………. INSTRUCTION MANUAL 4. Position 1) Press the up( ▲ ) or down( ▼ ) button to select the Position. 2) Press the right( ▶ ) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Position option. 4) Press the MENU button to save. 5. Swap

Page 27 - ) or SOURCE/SELECT button to swap the main image for the sub one.; INSTRUCTION MANUAL ............................................................................... 19; ) button to select the Sound Select option.

1) Press the up( ▲ ) or down( ▼ ) button to select the Swap. 2) Press the right( ▶ ) or SOURCE/SELECT button to swap the main image for the sub one. INSTRUCTION MANUAL ……………………………………………………………………. 19 5. Sound Select 1) Press the up( ▲ ) or down( ▼ ) button to select the Sound Select. 2) Press the rig...

Page 28 - ) button to select the Input Source option.; 0 ............................................................................... INSTRUCTION MANUAL

C. PIP MENU (For HDMI, DVI & PC Input) 1. Input Source 1) Press the up( ▲ ) or down( ▼ ) button to select the Input Source. 2) Press the right( ▶ ) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Input Source option. 4) Press the MENU button to save. 20 …………………………...

Page 29 - Reset; : All settings go to the factory initialization.; INSTRUCTION MANUAL ............................................................................... 21

1) Press the MENU button and then press the up( ▲ ) or down( ▼ ) button to select the Setup. 1. Reset 1) Press the right( ▶ ) or SOURCE/SELECT button 2) Press the right( ▶ ) or SOURCE/SELECT button again. 3) Press SOURCE/SELECT button to execute the reset. Reset : All settings go to the factory init...

Page 30 - 2 ............................................................................... INSTRUCTION MANUAL

2. Language 1) Press the up( ▲ ) or down( ▼ ) button to select the Language. 2) Press the right( ) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select language. 4) Press the MENU button to save. 3. OSD Tone 1) Press the up( ▲ ) or down( ▼ ) button to select the OSD Tone. 2) P...

Page 31 - ) button to select the On or Off; How to unlock

4. Blue Screen 1) Press the up( ▲ ) or down( ▼ ) button to select the Blue Screen. 2) Press the right( ) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off. 4) Press the MENU button to save. 5. Key Lock 1) Press the up( ▲ ) or down( ▼ ) button to select the Key...

Page 32 - INSTRUCTION MANUAL ............................................................................... 23

INSTRUCTION MANUAL ……………………………………………………………………. 23 6. Trigger 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger. 2) Press the right( ) or SOURCE/SELECT button. 6-1. Trigger Enable 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Enable. 2) Press the right( ) or SOURCE/SELEC...

Page 33 - 4 ............................................................................... INSTRUCTION MANUAL; ) button to select the Trigger Input option.

24 ……………………………………………………………………. INSTRUCTION MANUAL 6-2. Trigger Input 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Input . 2) Press the right( ) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Input option. 4) Press the Menu button to save. 6-...

Page 34 - INSTRUCTION MANUAL ............................................................................... 25; ) button to select the Trigger Option setting.

INSTRUCTION MANUAL ……………………………………………………………………. 25 6-4. Trigger Time 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Time. 2) Press left( ) or right( ) button to adjust Trigger Time setting. 3) Press the MENU button to save. 6-5 Trigger Option 1) Press the up( ▲ ) or down( ▼ ) button t...

Page 35 - 6 ............................................................................... INSTRUCTION MANUAL; ) button to select the Display Type option.

N/C (Normal Closed): When Trigger cable is opened, Trigger function is activated. N/O (Normal Opened): When Trigger cable is closed, Trigger function is activated. High: When Trigger signal is high(2~5[V]), Trigger function is activated. Low: When Trigger signal is low(0~0.6[V]), Trigger function is...

Page 36 - INSTRUCTION MANUAL ............................................................................... 27

The Type of Image 2 : Component, HDMI, DVI or PC. INSTRUCTION MANUAL ……………………………………………………………………. 27 7. Auto switching 1) Press the up( ▲ ) or down( ▼ ) button to select the Auto switching. 2) Press the right( ) or SOURCE/SELECT button. 7-1. Auto switching On/Off

Page 37 - 8 ............................................................................... INSTRUCTION MANUAL

1) Press the right( ) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off . 4) Press the Menu button to save. 28 ……………………………………………………………………. INSTRUCTION MANUAL 7-2. Auto switching Inputs enabled

Page 38 - INSTRUCTION MANUAL ............................................................................... 29

1) Press the up( ▲ )or down( ▼ ) button to select the Inputs enabled. 2) Press the right( ) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Input. 4) Press the right( ) or SOURCE/SELECT button. 1) Press the up( ▲ ) or down( ▼ ) button to select the On or Off. 2) Press...

Page 39 - 0 ............................................................................... INSTRUCTION MANUAL

1) Press the up( ▲ ) or down( ▼ ) button to select the Time. 2) Press the left( ) or right( ) button to adjust the Time setting. 3) Press the MENU button to save. 30 ……………………………………………………………………. INSTRUCTION MANUAL

Page 40 - INSTRUCTION MANUAL ............................................................................... 31

Using the VESA standard wall mount design and the 100mm hole pattern on the back panel to install the LCD monitor to the wall. Wall-mount Installation (Option) 1. The Monitor fixing bracket to the monitor using the fixing screws provided. 2. The monitor fixing bracket assembled with monitor INSTRUCT...

Page 42 - 2 ............................................................................... INSTRUCTION MANUAL; LED INDICATOR; GREEN Normal

32 ……………………………………………………………………. INSTRUCTION MANUAL This monitor features a power management system to “power down” upon receipt of the VESA DPMS(The display power management signaling) from a VESA DPMS video card. The VESA DPMS-compliant video card performs this signaling system through not sending h...

Page 43 - INSTRUCTION MANUAL ............................................................................... 33

INSTRUCTION MANUAL ……………………………………………………………………. 33 17 ” 19 ” 17 ˝ Diagonal AM-TFT(Active-Matrix) 19 ˝ Diagonal AM-TFT(Active-Matrix) Pixel pitch(mm) : 0.264(H) x 0.264(V) Pixel pitch(mm) : 0.294(H) x 0.294(V) BRIGHTNESS: 300cd/ ㎡ (Typical) BRIGHTNESS: 300cd/ ㎡ (Typical) CONTRAST RATIO: 1000:1(Typical...

Page 44 - Technical specifications are subject to change without notice.; WEEE Symbols

Gross Weight : 8.19Kg (18.06 lbs)) Gross Weight : 8.94Kg (19.71 lbs) ELECTRICAL RATINGS DC 12V/ 3.0A DC 12V/ 3.5A ▶▶ NOTE : Technical specifications are subject to change without notice. 34 ……………………………………………………………………. INSTRUCTION MANUAL WEEE Symbols

Page 45 - INSTRUCTION MANUAL ............................................................................... 35

INSTRUCTION MANUAL ……………………………………………………………………. 35 Correct Disposal of This Product(Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it shou...