EverFocus EKB200 - Manuals - manualsarea.com

Page 2 - SAFETY WARNINGS; Unauthorized opening of the device will annul the warranty claim!; WEEE

1 SAFETY WARNINGS • Do not place the device near to heaters, furnaces, other heat sources or under direct solar irradiation. • Operate the device only in locations providing the tolerable operating temperature range 0°C~50°C. • For cleaning, make sure the device is plugged off and only use a damp cl...

Page 4 - SPECIFICATIONS; USB HID class 3 axis Game controller; Operating system for EverFocus JoyMapper; Dimensions

3 3 SPECIFICATIONS Interface: USB1.1 (USB2.0 compatible) PTZ function key: 4 keys, Iris+, Iris-, Focus+, Focus- Re-assignment key: 12 keys Default protocol: USB HID class 3 axis Game controller Mounting method: Desktop, Sunk-In Power/ power consumption: USB bus power 5 VDC/ 80mA (maximum) Certificat...

Page 5 - INSTALLATION; Connection; The drawing shows the mounting position of the fixation brackets.; Front

4 INSTALLATION 3.1 USB - Connection Connect the USB-cable to the USB port of the PC or device, which supports EKB-200. The EKB-200 is compatible to USB 1.1 and USB 2.0 interfaces. The EKB-200 will be detected by PC as "USB, 3-Axis, 16 button gamepad". 3.2 Sunk-In Desk Installation For sunk-i...

Page 6 - labels; his application and the assigned key functions.; Function check and Calibration at PC; provides a check and calibration

5 3.3 Key labels The EKB-200 provides exchangable key description labels. This allows the user to customize the key labels to his application and the assigned key functions. Example: The label sheets have a size of 104 x 9.5 mm. 9.5 A key lable template form in *.doc and *.rtf format can be found at...

Page 7 - In Settings mode, click “calibrate” button to do calibration.

6 In Settings mode, click “calibrate” button to do calibration. 4. In Device Calibration Wizard starting page, click “Next” to continue. 5. To find center point, leave the handle centered, then press a button on the controller. Click “Next” to continue.

Page 8 - Finally, click “Apply” button to apply the settings to EKB200.

7 6. Move the handle in complete circles, then press a button on the controller. Click “Next” to continue. 7. To verify center point, leave the handle centered, then press a button on the controller. Click “Next” to continue. 8. Move the Z axis all the way up and down, then press a button on the con...

Page 9 - “Next” to continue.

8 3.5 Installation of JoyMap The JoyMap tool allows the assignment of standard windows operations to the EKB-200. Installation steps of JoyMap for EKB200: Double click “Setup.exe” file. The installer will guide you through the steps required to install JoyMap for EKB200 on your computer. Click “Next...

Page 11 - OPERATION; Assigning Windows functions with JoyMap - application; Double click the JoyMap icon in the task bar to open JoyMap window.

10 4 OPERATION 4.1 Assigning Windows functions with JoyMap - application NOTE: The EverFocus JoyMapper application will only work correctly with connected EKB200 keyboards. Other joystick devices are not supported. If no EKB200 is connected, the application will show after start: " DEVICE: No EK...

Page 16 - menu with a selection of available PTZ commands.

15 Select a key in the list. Right click in the right corner of any field in the "Action" Column to open a context menu with a selection of available PTZ commands. If the command requires a value, such as GoTo Preset [x] or Tour [x], enter the number [x] in the field "Value". "OK...

Page 17 - EverFocus Electronics Corp.; 801 Highland Ave. Unit A; Shangdi Information Industry Base,; Haidian District, Beijing China

16 EverFocus Electronics Corp. Head Office: 12F, No.79 Sec. 1 Shin-Tai Wu Road, Hsi-Chih, Taipei, Taiwan TEL: +886-2-26982334 FAX: +886-2-26982380 www.everfocus.com.tw USA L.A. Office: 1801 Highland Ave. Unit A Duarte, CA 91010, U.S.A. TEL: +1-626-844-8888 FAX: +1-626-844-8838 www.everfocus.com USA ...