EverFocus EDN800 - Manuals

EverFocus EDN800 – Manual in PDF format online.

Manuals:

Manual

Manual EverFocus EDN800

Summary

Page 3 - About this document

- - 3 About this document All the safety and operating instructions should be read and followed before the unit is operated. This manual should be retained for future reference. The information in this manual was current when published. The manufacturer reserves the right to revise and improve its p...

Page 4 - About AC Adaptor

- - 4 Use only the recommended power supplies. Power supplies must comply with the requirement of the latest version of IEC60950-1. Substitutions may damage the unit or cause a fire or shock hazard. Electrostatic-sensitive device. Use proper CMOS/MOSFET handing precautions to avoid electrostatic dis...

Page 5 - TABLE OF CONTENTS

- - 5 TABLE OF CONTENTS 1. INTRODUCTION.................................................................................................... 6 2. FEATURES............................................................................................................... 6 3. OPERATION WINDOW ................

Page 10 - Click this button to display the setup menu.

EDN800 10 3. Setting Click this button to display the setup menu. 3.1 System Info System information and system log check of the setup menu can be performed on this page. The “System Info” page has 2 tabs of the [Information] tab and the [Log] tab.

Page 12 - : displaying date and time of the log.; Log message; Press

EDN800 12 System Log: Date/Time : displaying date and time of the log. Log message : all information and event message, including login, user’s IP, reboot, firmware upgrade, load factory default, configuration reset and event detected. System will keep the newest 256 records. Press button to export ...

Page 15 - IP Type

EDN800 15 3.3 Network The network settings and the settings relating to Network, DDNS, Bandwidth, SMTP/FTP and Network Alarm can be configured on this page. The "Network setup" page has 5 tabs of the [Network] tab, the [DDNS] tab, the [SMTP/FTP] tab and the [Network alarm] tab. 3.3.1 Network...

Page 18 - Apply; to apply the setting changes or; Reset; to reset without saving the

EDN800 18 ○ www.dyndns.com ○ www.no-ip.com Enable: Check the box to enable DDNS setting. Service ISP: If you choose EverFocus DDNS server, you can obtain a free account name from EverFocus ” www.everfocusddns.com ”. Enter an IP Cam Account Name: .everfocusddns.com Press button to register or update ...

Page 20 - to separate address.

EDN800 20 Set SMTP The settings relating to the mail server used to send the e-mail notification from the camera to predefined addresses via SMTP can be configured. SMTP Server: Enter the IP address or the host name of the SMTP server used to send e-mails . SMTP Port: Enter the port number for SMTP....

Page 25 - Image setting; Hue; : to increase or decrease color saturation of video images. It is; Brightness; Camera Setting; AGC; : Select ON or OFF for Auto Gain Control.

EDN800 25 3.4.2 Camera Camera Settings The "Camera OSD setting" can be displayed on a video monitor and can be configured using the operation buttons on this page. Image setting Hue : to increase or decrease hue of video images. It is adjustable from 0~255. Contrast : to increase or decrease...

Page 28 - record event video to remote site.

EDN800 28 3.6 EVENT An event in the camera is when an Event Type is activated and causes certain actions to be performed. The event type is the set of conditions that specifies how and when which actions will be performed. This table describes how to setup action types and event type. Event Type Act...

Page 29 - Enable

EDN800 29 3.6.1 Event The settings relating to event occurrences such as settings for the event occurrence, motion, alarm and time mask can be configured on this page. The "Event" page has 4 tabs of the [Event] tab, the [Motion] tab, the [Alarm] tab and the [Time Mask] tab. Press button to a...

Page 32 - checkbox to enable event action.; Sensitivity; level for motion triggered by selecting from

EDN800 32 There are 5 motion trigger areas, which can be distinguished by 5 different colors. Check Enable checkbox to enable event action. For each of them, you can set the event action to be activated. Event action can be set in “Event” section. Moreover, you can set the Sensitivity level for moti...

Page 37 - Enable Daylight Saving; checkbox to enable daylight saving.

EDN800 37 3.7.2 Daylight Saving Set Daylight Saving Check Enable Daylight Saving checkbox to enable daylight saving. Set the start time to daylight saving time. Set the start week of daylight saving time: 1 st / 2 nd / 3 rd / 4 th / Last Set the start date of daylight saving time: Sunday / Monday / ...

Page 41 - the; Load; button to search firmware file. Press; Upgrade; button to upgrade the

EDN800 41 the Load button. The settings will be restored to the previous configuration. Upgrade Firmware Upgrade the EDN800 with the latest firmware. Press Browse button to search firmware file. Press Upgrade button to upgrade the firmware. Note 1: Do not disconnect power to the unit during the upgr...

Page 43 - EverFocus Electronics Corp.

EDN800 43 EverFocus Electronics Corp. Head Office: 12F, No.79 Sec. 1 Shin-Tai Wu Road, Hsi-Chih, Taipei, Taiwan TEL: +886-2-26982334 FAX: +886-2-26982380 www.everfocus.com.tw USA L.A. Office: 1801 Highland Ave. Unit A Duarte, CA 91010, U.S.A. TEL: +1-626-844-8888 FAX: +1-626-844-8838 www.everfocus.c...