EverFocus EAN800AW - Manuals

EverFocus EAN800AW – Manual in PDF format online.

Manuals:

Manual

Manual EverFocus EAN800AW

Summary

Page 3 - EAN800A/EAN800AW complies with CE and FCC.; About this document

EAN800A/EAN800AW 3 EAN800A/EAN800AW complies with CE and FCC. About this document All the safety and operating instructions should be read and followed before the unit is operated. This manual should be retained for future reference. The information in this manual was current when published. The man...

Page 4 - Terms and Trademark

EAN800A/EAN800AW 4 remove, use a mild detergent and wipe gently. Do not operate the appliance beyond its specified temperature, humidity or power source ratings. Do not use the appliance in an extreme environment where high temperature or high humidity exists. Use the appliance at temperature within...

Page 5 - TABLE OF CONTENTS

EAN800A/EAN800AW 5 TABLE OF CONTENTS 1. INTRODUCTION.................................................................................................... 6 2. FEATURES .............................................................................................................. 6 3. ACCESSING THE CAM...

Page 6 - Support MDI/MDI-X auto crossover function

EAN800A/EAN800AW 6 1. INTRODUCTION The EAN800A/EAN800AW network camera provides H.264, MPEG-4 and MJPEG compression for multi-streaming capabilities. H.264 is the most advanced video compression technology that saves your bandwidth without sacrificing video quality. Designed with advanced digital pr...

Page 7 - ACCESSING THE CAMERA MENU; ” and

EAN800A/EAN800AW 7 3. ACCESSING THE CAMERA MENU Step 1.Start an Internet Explorer browser. Step 2. Enter the IP address or host name of the camera in the Location/Address field of your Internet Explorer browser. (Please refer to EAN800A/EAN800AW Installation Guide for how to find the IP address) Ste...

Page 10 - Click this button to display the setup menu.

EAN800A/EAN800AW 10 4. SETTING Click this button to display the setup menu. 4.1 System Info System information and system log check of the setup menu can be performed on this page. The “System Info” page has 2 tabs: [Information] tab and the [Log] tab. 4.1.1 Information System Information: Firmware ...

Page 11 - : displaying date and time of the log.; Log message

EAN800A/EAN800AW 11 4.1.2 Log System Log: Date/Time : displaying date and time of the log. Log message : all information and event message, including login, user’s IP, reboot, firmware upgrade, load factory default, configuration reset and event detected. System will keep the newest 256 records.

Page 14 - Apply; to apply the setting changes or; Reset; to reset without saving the

EAN800A/EAN800AW 14 press the Browse button to locate the new language file (.evb) and then click the Load button. Press Apply to apply the setting changes or Reset to reset without saving the change. 4.3 Network The network settings and the settings relating to Network, DDNS, Bandwidth, SMTP/FTP an...

Page 17 - button to register or update DDNS account.

EAN800A/EAN800AW 17 4.3.2 DDNS DDNS setting When accessing the camera via the Internet from the network environment of which the global IP address is obtained using DHCP, the DDNS function is necessary. To use the DDNS function, it is necessary to connect to the dedicated DDNS server. We offer 4 DDN...

Page 19 - to separate address.

EAN800A/EAN800AW 19 4.3.4 SMTP/FTP Set SMTP The settings relating to the mail server used to send the e-mail notification from the camera to predefined addresses via SMTP can be configured. SMTP Server: Enter the IP address or the host name of the SMTP server used to send e-mails . SMTP Port: Enter ...

Page 22 - Wireless Setting

EAN800A/EAN800AW 22 4.3.6 Wireless (EAN800AW) Wireless Setting Enable: Check the box to enable wireless connection. SSID: Name of the wireless network the camera. The field accepts up to 32 alphanumeric characters. The name must be exactly the same as the used in the wireless access point or the con...

Page 23 - Press

EAN800A/EAN800AW 23 WPA (Wi-Fi Protected Access) key should follow either one of the following rules: - As 64 hexadecimal (0-9, A-F) characters. - As 8 to 63 ASCII characters. WEP (Wired Equivalent Protection) key should follow either one of the following rules: - As 5 characters for 64-bit WEP and ...

Page 25 - Image setting; Hue; : to increase or decrease color saturation of video images. It is; Brightness; Lens Setting; AGC; : Select ON or OFF for Auto Gain Control.

EAN800A/EAN800AW 25 4.4.2 Camera Image setting Hue : to increase or decrease hue of video images. It is adjustable from 0~255. Contrast : to increase or decrease object contrast of images. It is adjustable from 0~255. Saturation : to increase or decrease color saturation of video images. It is adjus...

Page 27 - Enable Audio; box to enable audio function.

EAN800A/EAN800AW 27 4.5 Audio The EAN800A/EAN800AW camera can transmit audio to other clients using a built-in microphone or connecting to external microphone to play audio received from other clients via connected speakers. This section describes how to configure the basic audio settings. Audio Che...

Page 29 - record event video to remote site.

EAN800A/EAN800AW 29 4.7 EVENT An event in the camera is when an Event Type is activated and causes certain actions to be performed. The event type is the set of conditions that specifies how and when which actions will be performed. This table describes how to setup action types and event type. Even...

Page 37 - Enable Daylight Saving; checkbox to enable daylight saving.

EAN800A/EAN800AW 37 Press Apply to apply the setting changes or Reset to reset without saving the change. 4.8.2 Daylight Saving Set Daylight Saving Check Enable Daylight Saving checkbox to enable daylight saving. Set the start time to daylight saving time. Set the start week of daylight saving time:...

Page 40 - Reboot; button if the unit is not behaving as expected.; Restore; IP setting; Default; button should be used with caution. Pressing this button will

EAN800A/EAN800AW 40 4.8.4 Maintenance Maintenance Server Reboot: The unit is rebooted without changing any of the settings. Use this method by pressing Reboot button if the unit is not behaving as expected. Restore: The unit is restarted and most current settings are reset to the factory default val...

Page 41 - will continue to record after the camera is rebooted.

EAN800A/EAN800AW 41 Save/Load Configuration Server To take a backup of all of the configurations, press Save to save all configurations to a config. file. If necessary, it is then possible to return to the previous settings if the settings are changed and there is unexpected behavior. Press the Brow...

Page 44 - EverFocus; EverFocus Electronics Corp.

EAN800A/EAN800AW 44 China Office: Room B-05D-1, KESHI PLAZA, Shangdi Information Industry Base,Haidian District, Beijing China 100085 TEL: +86-10-62973336/37/38/39 FAX: +86-10-62971423 www.everfocus.com.cn Europe Office: Albert-Einstein-Strasse 1 D-46446 Emmerich, Germany TEL: 49-2822-9394-0 FAX: 49...