Page 3 - Contents; NOTE; Your fridge is preregistered with the; Key Product Features
Please read operating manual carefully before using your unit.Please keep manual in a safe place.If lost you can find a digital copy at Evakool.com.au or contact Evakool on 1300 865 665. Contents 1 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Page 4 - refrigerator allow a gap of at least 200mm around the vents .
4 1 Safety Instructions • Warning: Do not touch exposed cables .• Warning: Do not use fridge if you suspect any connections could be wet .• When using the fridge in the vehicle or boat, please ensure the circuit being used is fused . • Any installation of DC power systems should be handled by a qual...
Page 5 - 2V Max Cable Length; AWG
5 3. Operation • Power: The refrigerator can be powered by a multi-voltage system utilizing either 12/24 Volts or 240 Volts . The electronic module controls the compressor motor and has the added function of a three stage battery protection . When the input voltage drops below the minimum, the compr...
Page 6 - LED Control Panel; SET
6 LED Control Panel Temperature setting range: -18°C to 10°C. • Plug in the DC or AC power .• Press button for 4 seconds to turn the fridge on . The LED display on the control panel will light up and the interior temperature will be displayed . • Press the SET button once the left bin display will f...
Page 7 - replace the faulty component .; USB Charging Port and Thermostat Override Switch
7 USB Port • This USB port can be used to charge small devices . E .g . mobile phones and remote controllers . The socket is rated to 500mA / 5 Volts . Thermostat Override Switch • If your digital thermostat fails and you are unable to set the temperature, turn this switch to Emergency override . Th...
Page 8 - sodium bicarbonate dissolved in lukewarm water to clean the unit .; The appliance is not turning on; • The setting temperature is too low .; Bad performance in refrigeration; • This is normal, due to the flow of the refrigerant .; Unusual noise when refrigerator is working
8 4. Cleaning & Maintenance • Clean the appliance inside and out with a clean damp cloth every week . If it is dirty, use sodium bicarbonate dissolved in lukewarm water to clean the unit . • Never use abrasive products, detergents or soap . After washing, rinse with clean water and dry carefully...
Page 9 - Code; lowering the voltage cut out setting to LOW .
9 6. Error Codes Code Reason / Solution ER1 Thermistor is Unplugged - Contact EvaKool ER2 Thermistor is Short Circuited - Contact EvaKool E1 Low Voltage • Please check the source voltage to ensure it is above the cut out . Try lowering the voltage cut out setting to LOW . • The vehicle cabling may b...
Page 12 - For your nearest stockist contact EvaKool; or visit us at
For your nearest stockist contact EvaKool T: 1300 385 665 (1300 EVKOOL) E: [email protected] or visit us at evakool.com.au