EvaKool DC95-SG - User Manual
EvaKool DC95-SG Refrigerator – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Key Product Features; temperature in the motor compartment.; Contents
- Page 4 – efficiency keep the unit in a cool location out of direct sunlight.; 2V Max Cable Length; AWG
- Page 5 – What do I need to do?
- Page 6 – Installation Guide; Reversing the Door Opening
- Page 7 – Installing the Mounting Kit
- Page 8 – Cross Flow Ventilation; cross flow ventilation.; Natural Convection; As a general rule of thumb:; Vent Sizing; with fresh cooler air.
- Page 12 – • This is normal, due to the flow of refrigerant in the unit.; Unusual noise when refrigerator is working; • The refrigerator is not placed on a level surface.
- Page 13 – Moulded Products; Cabinet Care; Do not use; plastic and can cause damage to painted surfaces.; Defrosting; Do not; Refrigerator Maintenance
INSTRUCTION
MANUAL
FOR MODELS
DC95-SG
DC110-SB
PLATINUM
®
UPRIGHT
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 Key Product Features • Powered by 12 Volt DC Secop Compressor.• Reliable electronics, high efficiency, low energy consumption.• Lockable door for travel.• Separate freezer compartment.• Operates in temperatures from 10°C to 43°C ambient temperature in the motor compartment. • Vegetable crisper.• L...
4 1 Safety Instructions • Warning: Do not use your unit if any cabling is damaged, frayed or exposed. • Warning: Do not attempt or continue to operate your unit if it is wet. • When using the unit ensure the circuit being used has a fuse or circuit breaker, located at the battery, the recommended si...
5 Control Panel Fault Light LED Light • Connect fridge to 12 or 24V DC. Power Source Cut Off Voltage Cut In Voltage 12V DC 10.4V 11.7V 24V DC 22.8V 24.2V • Ensure correct voltage is applied to run the fridge.• Set thermostat to the desired setting. We recommend starting at 3. Allow 24 hours for the ...
