Euromaid CP9BLB - Manuals - manualsarea.com

Page 2 - CONTENT

Canopy Installation and Operation Manual Home Appliances – March 2012 1 Dear Customer, We thank you for choosing this quality appliance and hope you enjoy many years of reliable service. Please ensure this manual is read carefully before installation and use. Keep this manual in a safe and accessibl...

Page 3 - NOTICE

Canopy Installation and Operation Manual Home Appliances – March 2012 2 3 …………………………………………………. Caution 4 …………………………………………………. Feature 5-8 ……………………………………………….. Installation 9 ………………………………………………….. Notice of installation 10 ……………………………………………..….. Safety Warning 11-16 …………………………………………..… Use 17 …………………...

Page 4 - SAFETY WARNINGS

Canopy Installation and Operation Manual Home Appliances – March 2012 3 SAFETY WARNINGS  Installation of this Integrated Canopy Rangehood must be carried by a qualified and competent installer.  The manufacturer disclaims and liability for any damage or injury caused as a result of not following i...

Page 9 - If the model with Glass:

Canopy Installation and Operation Manual Home Appliances – March 2012 8 If the model with Glass: 3.1 The cooker hood should be placed at a distance of 65-75cm (26-30inch) from the cooking surface for the best effect. See Pic 1. 3.2 Install the hook on a suitable place once the installation height is...

Page 11 - remaining bits of broken wood and dust.

Canopy Installation and Operation Manual Home Appliances – March 2012 10 (4) NOTICE OF INSTALLATION 1. Before installation, please ensure the area is clean to avoid suction of the remaining bits of broken wood and dust. 2. It cannot share the same air ventilation tube with other appliance such as ga...

Page 12 - Keep your children from using the cooker hood.

Canopy Installation and Operation Manual Home Appliances – March 2012 11 (5) SAFETY WARNING  Keep your children from using the cooker hood.  Your cooker hood is for domestic use only, not suitable for barbecue, roast shop and other commercial use.  Any installation work must be carried out by a q...

Page 13 - Speed adjustment .See pictures

Canopy Installation and Operation Manual Home Appliances – March 2012 12 （ 6 ） Speed adjustment .See pictures Electronic Button 1. Turn on the power; the buzzer will buzz five times. The sound shows that the appliance is powered. 2. Push the low button, the indicating light 1 on, the buzzer will buz...

Page 14 - Push stop button, and the motor will stop.; p i c6 C

Canopy Installation and Operation Manual Home Appliances – March 2012 13 Push button 1. Push stop button, and the motor will stop. 2. Push the Low button, the buzzer will buzz once, and the motor runs at low speed. 3. Push the Mid button, the buzzer will buzz once, and the motor runs at mid speed. 4...

Page 17 - LCD Touch control

Canopy Installation and Operation Manual Home Appliances – March 2012 16 LCD Touch control Pic 8 1. Power on: Switch on the power supply, and the backlight is lit, displaying “24- hour system”. The output is then blocked up,and the soot machine enters standby status. The backlight disappear automati...

Page 19 - Notice of cleaning cooker hood; Please do not use abrasive detergent for it will damage the body.

Canopy Installation and Operation Manual Home Appliances – March 2012 18 (7) MAINTENANCE 7.1 The cleaning of the carbon grease filter mesh The filter mesh is made of high-density stainless steel. Please do not use the corrosive detergent on it. Keeping this filter clean will keep the appliance runni...

Page 20 - Remove the filters, and push the light downwards.

Canopy Installation and Operation Manual Home Appliances – March 2012 19 (8) REPLACING LIGHT 8.1 halogen light: Use a small flat blade screwdriver to remove the inner stainless steel ring ( when removing the inner ring, do so carefully so not to damage the range hood, as the glass lens could easily ...

Page 21 - Abnormity and Solution; Cause

Canopy Installation and Operation Manual Home Appliances – March 2012 20 （ 9 ） Abnormity and Solution Fault Cause Solution Light on, but motor does not work The leaf blocked Get rid of the blocking The capacitor damaged Replace capacitor The motor jammed bearing damaged Replace motor The internal wi...