Enviro 25BV - Manuals

Enviro 25BV – Manual in PDF format online.

Manuals:

Manual

Manual Enviro 25BV

Summary

Page 2 - SAFETY PRECAUTIONS; NOTE; To prevent injury, if the pilot or pilot and; GENERAL; Installation and repair should be done by

SAFETY PRECAUTIONS FOR SAFE INSTALLATION AND OPERATION OF YOUR "ENVIROGAS" HEATER, PLEASE, CAREFULLY READ THE FOLLOWING INFORMATION: • All "ENVIROGAS" gas-fired appliances must be installed in accordance with these instructions. Carefully read all the instructions in this manual firs...

Page 3 - TABLE OF CONTENTS; CODES AND APPROVALS; VENTED; type is identified by the suffix BV

TABLE OF CONTENTS SECTION PAGE 1. Code Approvals 3 2. Dimensions and Clearances to Combustibles 5 3. Venting 6 4. Assembly and Installation Instructions 7 5. Electrical Requirements 8 6. Gas Line Connection and Testing 9 7. Installation of Log Sets and Embers and Brick Panels 10 8. Operating Instruc...

Page 4 - CODES AND APPROVALS CONTINUED; RE: CONVERSION OF ZERO CLEARANCE FACTORY BUILT FIREPLACES; Background; ‘’WARNING- THIS FIRPLACE MUST ONLY BE OPERATED WITH A GAS INSERT-

CODES AND APPROVALS CONTINUED RE: CONVERSION OF ZERO CLEARANCE FACTORY BUILT FIREPLACES The following instructions cover Sherwood Industries Ltd. policy for Gas-Fired Appliances (inserts) to be retofitted into existing factory built fireplaces with replacement parts removed. GENERAL REQUIREMENTS Bac...

Page 5 - DIMENSIONS AND CLEARANCES TO COMBUSTIBLES; DISTANCE TO COMBUSTIBLES:; OTHER DIMENSIONS; AUTOMATIC FLUE GAS SPILL SWITCH

2. DIMENSIONS AND CLEARANCES TO COMBUSTIBLES DISTANCE TO COMBUSTIBLES: Mantel pillar to surround panel 2" / 5.08 cm Floor to 8" wide mantel 40" / 101 cm Minimum non-combustible surface in front of unit 8" / 20.8 cm OTHER DIMENSIONS A. Minimum Depth of unit into fireplace 16" / 41...

Page 6 - VENTING FIREPLACE INSERTS; IMPORTANT

3.VENTING FIREPLACE INSERTS WARNING: Operation of this heater when not connected to a properly installed and maintained venting system can result in carbon monoxide (CO) poisoning and possible death. The Envirogas ACCENT 25 may be installed and vented into any solid fuel fireplace that has been inst...

Page 7 - ASSEMBLY AND INSTALLATION INSTRUCTIONS; ASSEMBLING AND INSTALLING YOUR ENVIROGAS; CAUTION GLASS MAY SEPARATE FROM DOOR.

4. ASSEMBLY AND INSTALLATION INSTRUCTIONS ASSEMBLING AND INSTALLING YOUR ENVIROGAS ACCENT 25 1. Remove the unit from it’s box 2. Open the door, by first removing the cover with the nameplate attached (open valve door and pull nameplate cover side tab to release catch), undo the two bolts at the bott...

Page 8 - ELECTRICAL REQUIREMENTS; INSTALLING REMOTE THERMOSTAT OR WALL SWITCH; RECOMMENDED WIRE SIZE

5. ELECTRICAL REQUIREMENTS The ACCENT 25 will operate without electrical power. This model has a Millivolt gas control which uses the pilot flame to generate enough electricity to operate the main burners. The appliance when equipped with blower must be electrically connected and grounded in accorda...

Page 9 - GAS LINE CONNECTIONS and TESTING; NATURAL PROPANE; NEVER USE AN OPEN FLAME FOR LEAK TESTING

6. GAS LINE CONNECTIONS and TESTING WARNING: Only persons licensed to work with gas piping may make the necessary gas connections to this appliance. GAS LINE CONNECTION • This stove is equipped with a 3/8 x 3 inch black iron nipple located on the right side of the unit terminating in a 3/8" male...

Page 10 - INSTALLATION OF LOGS, EMBERS and BRICK PANELS; Place ember material in the shaded area

7. INSTALLATION OF LOGS, EMBERS and BRICK PANELS INSTALLING THE GLOWING EMBERS and LOGSET A bag of ceramic fiber embers is provided for use on the burner PAN. CAUTION: Use only the type of ember material supplied with this appliance. Due to the irregular size of the ember material there may be more ...

Page 11 - OPERATING INSTRUCTIONS; FOR YOUR SAFETY READ BEFORE OPERATING; LIGHTING INSTRUCTIONS; gas; TO TURN OFF GAS TO

8.OPERATING INSTRUCTIONS FOR YOUR SAFETY READ BEFORE OPERATING WARNING: IF YOU DO NOT FOLLOW THESE INSTRUCTIONS EXACTLY, A FIRE OR EXPLOSION MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE. A) This appliance is equipped with a pilot, which must be lit by hand by following these i...

Page 12 - ROUTINE MAINTENANCE and SERVICE; CLEANING THE GLASS; TO REPLACE DOOR GLASS; Bleed lines before lighting and light; ADJUSTING VENTURI AIR SETTINGS

9. ROUTINE MAINTENANCE and SERVICE Periodically check to ensure that your system is clean. Periodically check the pilot and burner. Check to see that all the burner ports are clean and clear. Check the pilot head for blockage. Check to ensure the pilot flame is blue with yellow tips. NOTE: Wipe the ...

Page 13 - NATURAL GAS; CONVERSION KIT PARTS LIST; Pilot Orifice

10.FUEL CONVERSION “Warning” This conversion kit shall be installed by a qualified service technician in accordance with the manufacturer’s instructions and all applicable codes and requirements of the authority having jurisdiction. If the information in these instructions is not followed exactly, a...

Page 14 - TROUBLE SHOOTING

11. TROUBLE SHOOTING Problem Possible Cause Solution Spark will not arc to the pilot after repeated pressing of spark ignitor Defective piezo ignitor Check connections to ignitor -If ignitor connections are good but there is no spark-replace ignitor Broken spark electrode -Check for broken ceramic i...

Page 15 - PARTS AND ACCESSORIES

15 12. PARTS AND ACCESSORIES Service Parts available from your local Envirogas Dealer. PART # DESCRIPTION EG25-001 Convection Blower EG25-002 Heyco Strain Relief EG25-003 Fan Controller with Knob EG25-004 Hi-Temperature Electrical Cord EG25-008 Burner Switch EG25-014 120°F Ceramic Auto Reset n/o Tem...

Page 16 - POST APR; ACCENT 25 INSERT

PAINTED DOOR EG25-092 BLACK IRON NIPPLE EG25-062 LOUVER SET (TOP & BOTTOM) EG25-115 FULLY ASSEMBLED PILOT EC-015 NG EC-016 LP THERMOPILE EC-012 THERMOCOUPLE EC-009 SPARK ELECTRODE EC-011 ACCENT 25 DOOR COVER GOLD- 50-009 NICKEL 50-010 PAN BURNER POST APR 2000 120 ° F (49 ° C) FAN TEMPERATURE SEN...

Page 17 - PAINTED TRIM

17 FPI WIRING HARNESS PART (A) EC-034 (NOT SHOWN) FAN CONTROLLER EC-039 ACCENT 25 REGULAR SURROUND WITH TRIM PAINTED TRIM 50-107 BRASS TRIM 50-011 NICKEL TRIM 50-012 BRASS TRIM CORNER BRACKETS EC053 ACCENT 25 EXPLODED VIEW SURROUND PANELS PAGE 1of 2 JUNE 2002 ON / OFF / THERMOSTAT SWITCH BURNER SWIT...

Page 19 - INSTALLATION DATA SHEET

14. INSTALLATION DATA SHEET The following information must be recorded by the installer for warranty purposes and future reference. Envirogas Model: ACCENT 25 BV Name of Dealer: ___________________________________________ Address: ___________________________________________ _________________________...