Enterasys Networks VSER-RPU-SYS - Manuals

Notice vi • Declaration of Conformity Application of Council Directive(s): 89/336/EEC73/23/EEC Manufacturer’s Name: Enterasys Networks, Inc. Manufacturer’s Address: 50 Minuteman RoadAndover, MA 01810USA European Representative Address: Enterasys Networks, Ltd.Nexus House, Newbury Business ParkLondon...

vii Contents Chapter 1: About the Redundant Power Supply 1-1 Overview 1-1Features and Benefits 1-1 Front and Rear Panels 1-1 LEDs 1-2 Chapter 2: Installing the Redundant Power Supply 2-1 Installation 2-1Selecting a Site 2-1 Equipment Checklist 2-1 Package Contents 2-2 GettingHelp 2-2 Optional Rack-M...

viii Tables Table 1-1. Port Status LEDs 1-2 Table A-1. Troubleshooting Chart A-1

ix Figures Figure 1-1. Front and Rear Panels 1-1 Figure 1-2. LEDs 1-2 Figure 2-1. Attaching the Brackets 2-4 Figure 2-2. Installing the RPS in a Rack 2-4 Figure 2-3. Attaching the Adhesive Feet 2-5 Figure 2-4. Power Receptacle 2-5 Figure 2-5. Connecting Several Switches to an RPS 2-6

About the Redundant Power Supply 1-2 1 LEDs The following diagram and table describe the functions of the LEDs on the Front Panel. Figure 1-2. LEDs Table 1-1. Port Status LEDs LED Condition Status RPS 1, 2, 3, 4 On Green Power is being supplied to the RPS, the unit is functioning normally, and the R...

2-1 Chapter 2: Installing the Redundant Power Supply Installation Note: The VSER-RPU-SYS is compatible with V2H124-24 and V2H124-24T only. The RPS may be placed on a desktop or mounted in a rack. Caution: DO NOT place the RPS on the floor as the case is not waterproof. It is recommended that this RP...

Installing the Redundant Power Supply 2-2 2 Package Contents • Redundant Power Supply Unit• One AC Supply Power Cord — US, Continental Europe or UK• Four DC Backup Power Cords with IEC connectors on both ends (length 152 cm [60 in.] each) • Rack Mounting Kit containing brackets and screws• Adhesive ...

Mounting 2-3 2 • The device history (i.e., have you returned the device before, is this a recurring problem, etc.) • Any previous Return Material Authorization (RMA) numbers Optional Rack-Mounting Equipment If you plan to rack-mount the RPS, be sure to have the following equipment available: • Four ...

Installing the Redundant Power Supply 2-4 2 To rack-mount devices: 1. Attach the brackets to the device using the screws provided in the Rack Mounting Kit. Figure 2-1. Attaching the Brackets 2. Mount the device in the rack, using four rack-mounting screws (not provided). Figure 2-2. Installing the R...

Connecting Switches to the RPS 2-5 2 Desktop or Shelf Mounting 1. Attach the four adhesive feet to the bottom of the first RPS unit. Figure 2-3. Attaching the Adhesive Feet 2. Set the device on a flat surface near an AC power source, making sure there are at least two inches of space on all sides fo...

Installing the Redundant Power Supply 2-6 2 4. Power up the RPS by connecting one end of the AC cord to the AC receptacle on the RPS, and the other end to a grounded power outlet. 5. Check the LEDs on the RPS to ensure proper operation. The Fan LED and the RPS LED for connected switches should light...

A-1 Appendix A: Troubleshooting Diagnosing RPS Indicators Power and Cooling Problems If the fan LED does not turn on when the power cord is plugged in, you may have a problem with the power outlet, power cord, or internal power supply. However, if the unit powers off after running for a while, check...

B-1 Appendix B: Specifications Physical Characteristics Ports 4 RPS DC power outlets LEDs Ports 1 to 4, and fan status LEDs. Weight 5 kg (27.6 lbs) Size 44.0 x 28.4 x 4.3 cm (17.34 x 11.19 x 1.69 in.) Temperature Operating: 0 to 40 °C (32 to 104°F)Storage: -40 to 70 ° C (-40 to 158 ° F) Humidity Ope...

Specifications B-2 B Power Supply Internal, auto-ranging: 100 to 240 VAC, 50 to 60 HzOutput 12 VDCCurrent: 0 A (minimum), 13 A (maximum)Line regulation: +/- 1%Load regulation: +/- 10%Overshoot and undershoot: 5% Maximum Current 10 A @ 110 VAC 5 A @ 230 VAC Fan Voltage +12 VDCOperating voltage range:...

Index-1 A adhesive feet, attaching 2-5air flow requirements 2-1 B brackets, attaching 2-4 C contents of package 2-2cooling problems A-1cord sets, international 2-6 D desktop mounting 2-5 E equipment checklist 2-2 F front panel of RPS 1-1 G grounding for racks 2-3 I installation desktop or shelf moun...