Enterasys Networks VHSIM2-A6DP - Manuals

iv 5. UNITED STATES GOVERNMENT RESTRICTED RIGHTS. The enclosed Product (i) was developed solely at private expense; (ii) contains “restricted computer software” submitted with restricted rights in accordance with section 52.227-19 (a) through (d) of the Commercial Computer Software-Restricted Rights...

vi DECLARATION OF CONFORMITY Application of Council Directive(s): 89/336/EEC73/23/EEC Manufacturer’s Name: Enterasys Networks, Inc. Manufacturer’s Address: 35 Industrial WayPO Box 5005 Rochester, NH 03867 European Representative Name: Mr. Jim Sims European Representative Address: Enterasys Networks ...

Contents vii Contents Figures ............................................................................................................................................ xTables.............................................................................................................................

viii Contents 3.2 Accessing the VHSIM2-A6DP ATM Screen .................................................... 3-8 3.3 ATM Connections Screen ............................................................................. 3-10 3.4 ATM Connection Setup Screen..................................................

Contents ix 3.17 Signalling Screen .......................................................................................... 3-573.17.1 Changing the UNI Version ............................................................. 3-59 3.17.2 Changing the ILMI Status to Disabled ..............................

x Figures Figures Figure Page 1-1 VHSIM2-A6DP ................................................................................................................ 1-1 2-1 Removing the APIM Coverplate ...................................................................................... 2-3 2-2 Installin...

Figures xi B-7 VAPIM-31 ........................................................................................................................B-7 B-8 VAPIM-39 ........................................................................................................................B-8 B-9 VAPIM-39LR ...

xii Tables Tables Table Page 3-1 Event Messages ........................................................................................................... 3-4 3-2 Keyboard Conventions ................................................................................................. 3-5 4-1 VHSIM2-A6...

xiii About This Guide Welcome to the Enterasys Networks VHSIM2-A6DP User’s Guide. This manual provides the following information: • Describes VHSIM2-A6DP features • Explains how to install the VHSIM2-A6DP in Enterasys interface module or standalone device • Outlines specifications for the Enterasys ...

Related Manuals xiv Chapter 4 , LANVIEW LEDs , describes how to use the VHSIM2-A6DP LEDs to monitor VHSIM performance and status. Appendix A , VHSIM2-A6DP Specifications , describes environmental specifications and safety requirements for the VHSIM2-A6DP. Appendix B , APIM and VAPIM Specifications ,...

Related Manuals xv DOCUMENT CONVENTIONS The following conventions are used throughout this document: NOTE: Calls the reader’s attention to any item of information that may be of special importance. TIP: Conveys helpful hints concerning procedures or actions. CAUTION: Contains information essential t...

Related Manuals xvi x A lowercase italic x indicates the generic use of a letter (e.g., xxx indicates any combination of three alphabetic characters). n A lowercase italic n indicates the generic use of a number (e.g., 19nn indicates a four-digit number in which the last two digits are unknown). [ ]...

Introduction 1-1 1 Introduction This chapter provides a brief overview of the VHSIM2-A6DP and provides information on obtaining additional help from Enterasys Networks. Figure 1-1 VHSIM2-A6DP 1.1 OVERVIEW The VHSIM2-A6DP extends the functionality of the Enterasys Networks interface module or standal...

Overview 1-2 Introduction 1.1.1 ATM Port Interface Modules (APIMs and VAPIMs) The VHSIM2-A6DP supports two Enterasys Networks APIMs for ATM connectivity and redundancy. APIMs for any interface can be installed into the VHSIM2-A6DP. The two APIMs installed may be of any combination of physical layer ...

Getting Help Introduction 1-3 1.2 GETTING HELP For additional support related to the product or this document, contact Enterasys Networks using one of the following methods: Before contacting Enterasys Networks, have the following information ready: • Your Enterasys Networks service contract number ...

Installation 2-1 2 Installation This chapter contains instructions for the following tasks: • Unpacking the VHSIM2-A6DP ( Section 2.1 ) • Installing APIMs ( Section 2.2 ) • Installing a VHSIM2-A6DP ( Section 2.4 ) To install the VHSIM2-A6DP and APIMs, the following tools are required: • Antistatic w...

Installing APIMs 2-2 Installation 2.2 INSTALLING APIMs To install an APIM into the VHSIM2-A6DP, proceed as follows: 1. Attach the antistatic wrist strap (refer to the instructions on the antistatic wrist strap package). 2. Remove and save the faceplate screws attaching the faceplate to the VHSIM2-A6...

Installing VAPIMs Installation 2-5 5. Press down firmly on the APIM until the pins slide all the way into the connector. Ensure the APIM sits flush on the standoffs. If the APIM does not sit flush with the standoffs, ensure that the pins have been inserted into the correct connector on the VHSIM2-A6...

Installing a VHSIM 2-8 Installation 5. Press down firmly on the VAPIM until the pins slide all the way into the connector. Ensure the VAPIM sits flush on the standoffs. 6. Secure the VAPIM with the screws saved in step 3 . The screw used to attach the rear of the VAPIM to the standoff is optional, a...

Installing a VHSIM 2-10 Installation Place the VHSIM behind the module faceplate. See Figure 2-6 . Figure 2-6 Installing the VHSIM2-A6DP 7. Align the connectors of the VHSIM2-A6DP into the host device connector pins on the module as shown in Figure 2-6 . VHSIM2-A6DP APIM 1 APIM 2 2825_06 Host Device...

Installing a VHSIM Installation 2-11 8. Press down firmly on the back of the VHSIM2-A6DP until the pins slide all the way into the connector holes. 9. Secure the VHSIM2-A6DP to the faceplate using the two screws saved in step 5 . 10. Secure the VHSIM2-A6DP to the standoffs with the two screws saved ...

Installing a VHSIM 2-12 Installation 7. Place the VHSIM2-A6DP behind the device faceplate as shown back in Figure 2-6 . 8. Insert the connectors of the VHSIM2-A6DP into the host device connector pins on the device. 9. Press down firmly on the back of the VHSIM2-A6DP until the pins slide all the way ...

Local Management 3-1 3 Local Management This chapter explains how to perform the following tasks: • How to view current ATM connections. • Configure Permanent Virtual Channels (PVCs). • Configure LAN Emulation Clients (LECs). • View Emulated LAN (ELAN) properties. • Perform searches of the VHSIM2-A6...

Using Local Management Screens 3-2 Local Management The following must be completed before configuring the VHSIM2-A6DP through Local Management: • Installation of an APIM in the VHSIM2-A6DP. Refer to Chapter 2 for instructions. • Installation of the VHSIM2-A6DP in the host interface module or standa...

Using Local Management Screens Local Management 3-3 Figure 3-1 Example of a Local Management Screen The following list explains each of the Local Management fields: Event Message Field This field briefly displays messages that indicate if a Local Management procedure was executed correctly or incorr...

Using Local Management Screens 3-4 Local Management Table 3-1 describes the most common event messages. Event messages related to specific Local Management applications are described with those applications throughout this manual. Display Fields Display fields cannot be edited. These fields may disp...

Using Local Management Screens Local Management 3-5 3.1.2 Local Management Keyboard Conventions All key names appear in this manual as capital letters. For example, the Enter key appears as ENTER and the Backspace key appears as BACKSPACE. Table 3-2 explains the keyboard conventions used in this man...

Using Local Management Screens 3-6 Local Management 3.1.3 Navigating Local Management Screens The VHSIM2-A6DP Local Management application consists of a series of menu screens. Navigate through Local Management by selecting items from the menu screens. Figure 3-2 shows the hierarchy of the VHSIM2-A6...

Using Local Management Screens Local Management 3-7 3.1.3.2 Exiting Local Management Screens There are two ways to exit Local Management (LM). Using the EXIT Command To exit an LM screen using the EXIT command, proceed as follows: 1. Use the arrow keys to highlight the EXIT command at the bottom of ...

Accessing the VHSIM2-A6DP ATM Screen 3-8 Local Management 3.2 ACCESSING THE VHSIM2-A6DP ATM SCREEN To access the VHSIM2-A6DP ATM screen in a standalone device (e.g., 2E42-27), navigate through the Local Management screens until the High Speed Configuration screen displays. Select VHSIM2-A6DP CONFIGU...

Accessing the VHSIM2-A6DP ATM Screen Local Management 3-9 PHYSICAL PORT CONFIGURATION This menu item displays the Physical Port Configuration Menu screen. This screen provides two menu items that allow the user to configure the physical ports of the VHSIM2-A6DP. For details, refer to Section 3.8 . L...

ATM Connections Screen 3-10 Local Management 3.3 ATM CONNECTIONS SCREEN The ATM Connections screen allows the user to open the ATM Connections Setup screen, and the ATM Connection Setup by Virtual Interface screen. To access the ATM Connections screen from the ATM screen, perform the following steps...

ATM Connection Setup Screen Local Management 3-11 CONNECTIONS BY VIRTUAL INTERFACE This menu item, when selected, opens the ATM Connection Setup by Virtual Interface screen. This screen is used to view all current connections (PVCs and SVCs) on an interface-by-interface basis. Refer to Section 3.7 ....

ATM Connection Setup Screen 3-12 Local Management The following list explains each of the ATM Connection Setup screen fields: Total Bandwidth Available (Read-Only) Shows the resources the current APIM has available for the assignment of PVCs and their associated traffic descriptors. If there are no ...

ATM Connection Setup Screen Local Management 3-13 • LLC Encapsulated - Logical Link Control for Bridged Protocols as defined by the IETF RFC 1483. This encapsulation type is for PVCs only. ATM Address (ESI) (Read-Only) Displays the MAC Address of the device to which the SVC or PVC is currently conne...

Traffic Management PVC Priority Assignments 3-14 Local Management 3.5 TRAFFIC MANAGEMENT PVC PRIORITY ASSIGNMENTS The Traffic Management PVC Priority Assignments screen is only accessible if the operational mode of the board is 802.1Q Switching. If the board is in SecureFast mode, the Add/Delete Ent...

Traffic Management PVC Priority Assignments Local Management 3-15 PVC Vport (Modifiable) Automatically displays the next available PVC Vport (Virtual Port) for configuration. This field displays the first unconfigured Virtual Port on the device as the default. The first unconfigured Virtual Port is ...

Traffic Management PVC Priority Assignments Local Management 3-17 3.5.1 Adding Traffic Management PVC Priority Assignments To add an entry to the PVC Priority Assignments, perform the following steps: 1. Use the arrow keys to highlight the PVC Vport field. Choose the PVC Vport desired by either pres...

Traffic Management PVC Priority Assignments Local Management 3-19 3.5.2 Modifying an Entry (Vport) To modify an existing entry (Vport), perform the following steps: 1. Use the arrow keys to highlight the PVC VPort field. 2. Select the VPport value of the existing PVC to be modified. 3. Use the arrow...

Traffic Management PVC Priority Assignments 3-20 Local Management 3.5.4 Traffic Management PVC Priority Assignments Screen Example Figure 3-7 Example Traffic Management PVC Priority Assignments Screen The user has two boards connected to an ATM switch and each configured as above. The ATM switch is ...

Add/Delete Entry Screen Local Management 3-21 3.6 ADD/DELETE ENTRY SCREEN The Add/Delete Entry screen is used to create, modify, or delete PVCs. To access the Add/Delete Entry screen from the ATM Connection Setup screen perform the following steps: 1. Use the arrow keys to highlight the ADD/DELETE c...

Add/Delete Entry Screen 3-22 Local Management AAL Type (Read-Only) Displays the ATM Adaptation Layer (AAL) being used by the PVC. The VHSIM2-A6DP uses AAL 5. Encapsulation Type (Toggle) Displays the type of data encapsulation that the VHSIM2-A6DP will use to perform LAN to ATM translation. This fiel...

Add/Delete Entry Screen Local Management 3-23 2. Use the arrow keys to highlight the VCI field and enter a VCI value from 32 to 4095. 3. Use the arrow keys to highlight the Encapsulation Type field and press the SPACE bar until the appropriate Encapsulation Type displays. 4. Use the arrow keys to hi...

ATM Connection Setup By Virtual Interface Screen 3-24 Local Management 3.7 ATM CONNECTION SETUP BY VIRTUAL INTERFACE SCREEN The ATM Connection Setup by Virtual Interface screen is used to view all current connections for each LAN Emulation Client (LEC) that has been configured on the VHSIM2-A6DP on ...

ATM Connection Setup By Virtual Interface Screen Local Management 3-25 Virtual Interface # (Selectable) Displays the virtual interface number that this LEC or PVC has been assigned by the VHSIM2-A6DP. Each LEC and PVC configured on the VHSIM2-A6DP is automatically assigned a virtual interface number...

ATM Connection Setup By Virtual Interface Screen 3-26 Local Management Index (Read-Only) Displays the traffic index assigned to each specific PVC. NEXT (Command) Allows the user to view the next page of information for the current virtual interface, if there are more lines of connection information ...

Physical Port Configuration Menu Screen Local Management 3-27 3.8 PHYSICAL PORT CONFIGURATION MENU SCREEN The Physical Port Configuration Menu screen contains two menu items that allow the user to access the Port Framer Configuration screen and the ATM Port Redundancy Configuration screen. To access...

Por t Framer Configuration Screen 3-28 Local Management 3.9 PORT FRAMER CONFIGURATION SCREEN The Port Framer Configuration screen is used to enable or disable ATM statistics and alarms, and to specify, if applicable, the transmission type that the APIM will use (SONET or SDH). The Port Framer Config...

ATM Por t Redundancy Configuration Screen 3-30 Local Management 3.9.1 Configuring an APIM To configure an APIM to use custom settings, perform the following steps: 1. Use the arrow keys to highlight the Physical Port field. 2. Press the SPACE bar to select APIM 1 ([1]) or APIM 2 ([2]). 3. Use the ar...

ATM Port Redundancy Configuration Screen Local Management 3-31 • Reset all configurations in the ATM Port Redundancy Configuration screen to their factory default settings. To access the ATM Port Redundancy Configuration screen from the ATM screen, perform the following steps: 1. Use the arrow keys ...

ATM Por t Redundancy Configuration Screen 3-32 Local Management Primary Port (Modifiable) Used to determine which APIM installed in the VHSIM2-A6DP will be the primary port. Entering 1 in this field signifies that the APIM in slot APIM 1 on the VHSIM2-A6DP will be the primary port. Entering 2 signif...

ATM Port Redundancy Configuration Screen Local Management 3-33 TEST PORTS NOW (Command) Used to instruct the VHSIM2-A6DP to perform an APIM redundancy test immediately. When the test is completed, the results are displayed in the Port Usability/Status field. RESET TO FACTORY DEFAULTS (Command) Used ...

ATM Por t Redundancy Configuration Screen 3-34 Local Management 3.10.3 Setting the Active Port To set the Active port, perform the following steps: 1. Use the arrow keys to highlight the Active port field. 2. Enter 1 or 2. Entering 1 signifies APIM 1 of the VHSIM2-A6DP. Entering 2 signifies APIM 2 o...

ATM Port Redundancy Configuration Screen Local Management 3-35 3. Use the arrow keys to highlight the SAVE command at the bottom of the screen and press ENTER. The changes are saved to memory. 3.10.6 Setting the Periodic Test Status Field To enable or disable the Periodic test status feature, perfor...

LAN Emulation Clients Screen 3-36 Local Management 3.10.8 Using the TEST PORTS NOW Command To force the VHSIM2-A6DP to perform a redundancy test immediately, perform the following steps: 1. Use the arrow keys to highlight the TEST PORTS NOW command. 2. Press ENTER. The VHSIM2-A6DP performs the redun...

LEC Table Screen 3-38 Local Management LEC TRANSMIT QUEUES This menu item opens the Traffic Management LEC Priority Queues screen. This screen is used to assign 802.1P priorities to a LEC. Refer to Section 3.16 . 3.12 LEC TABLE SCREEN The LEC Table screen is a read-only screen that is used to view t...

LEC Table Screen Local Management 3-39 Port (Read-Only) Displays the application port number this has LEC has been dynamically assigned. Index (Read-Only) Displays the Index of the LEC. LEC ID (Read-Only) This value is dynamically assigned by the LES to uniquely identify this LEC. Ver (Read-Only) Di...

LEC Administration Screen 3-40 Local Management • Join - During the Join phase, the LEC establishes a Control Direct VCC with the LES. After this connection is made, the LEC is assigned a LEC ID, the name of the ELAN it will join, and is notified of the maximum frame size allowed on the ELAN and the...

LEC Administration Screen Local Management 3-41 Configure LEC (Toggle) Used to specify if the LEC is configured manually by the user, or automatically by the VHSIM2-A6DP. This field toggles between Automatic and Manual. For instructions on how to configure the LEC automatically and manually, refer t...

LEC Administration Screen 3-44 Local Management 3.13.1 Changing the LEC Status of an Existing LEC To change the LEC Status, perform the following steps: 1. Use the arrow keys to highlight the MODIFY MODE command at the bottom of the screen and press ENTER. 2. Use the arrow keys to highlight the LEC ...

LEC Administration Screen Local Management 3-45 6. Use the arrow keys to highlight the ELAN Name field. Enter a name for the ELAN that is no more than 32 characters in length. This step is optional, and does not have to be performed to configure the LEC automatically. 7. Use the arrow keys to highli...

LEC Administration Screen 3-46 Local Management 3. Press the SPACE bar to toggle between the options (1.0 or 2.0) until the desired LANE version displays. 4. Use the arrow keys to highlight the Configure LEC field. 5. Use the SPACE bar to toggle between the options until Manual displays. 6. Use the ...

LEC Administration Screen Local Management 3-47 3.13.4 Modifying an Existing LEC To modify a LEC that has already been created, perform the following steps: 1. Use the arrow keys to highlight the MODIFY MODE command and press ENTER. 2. Use the arrow keys to highlight the LEC Index field. 3. Enter th...

LEC Properties Screen 3-48 Local Management h. Press the SPACE bar to toggle between the options (Enable or Disable) until the desired option displays. i. Use the arrow keys to highlight the Topology Change Frames field. j. Press the SPACE bar to toggle between the options (Enable or Disable) until ...

LEC Properties Screen Local Management 3-49 Figure 3-16 LEC Properties Screen The following list explains each of the LEC Properties screen fields: LEC Index (Selectable) Used to identify this LEC both on the VHSIM2-A6DP and in the ATM Forum’s LEC MIB. LEC ID (Read-Only) Displays the LAN Emulation C...

LEC Properties Screen Local Management 3-51 LECS Configuration Direct VCC (Read-Only) Displays the VPI and VCI of the Configuration Direct Virtual Channel Connection (VCC) that the LEC has with the LECS. This connection is used to obtain LAN Emulation configuration parameters, and is also used by th...

LEC ARP Cache Screen 3-52 Local Management 3.15 LEC ARP CACHE SCREEN The LEC ARP Cache screen is used to view the ATM address, VPI and VCI used to communicate with a MAC address. To access the LEC ARP Cache screen, perform the following steps: 1. Use the arrow keys to highlight the LEC ARP CACHE men...

LEC ARP Cache Screen Local Management 3-53 Search By (Selectable) Used to step through the following options: • ALL ADDR (all addresses) • VPI, VCI (VPI/VCI pair) • MAC ADDR (MAC address) • ATM ADDR (ATM address of the LEC) This field allows the user to specify the way in which the LEC ARP Cache wil...

LEC Priority Queues Screen 3-54 Local Management SEARCH (Command) Performs a search of the LEC ARP Cache based on the search term specified in the ADDR or VPI/VCI fields below the Search By field. This command is only available if a valid search term is entered. 3.15.1 Performing a Search To perform...

LEC Priority Queues Screen Local Management 3-55 Figure 3-18 Traffic Managment LEC Priority Queues Screen The following list explains each of the Traffic Management LEC Priority Queues screen fields: LEC Index (Selectable) Displays the Index of the LEC to which the information displayed on the scree...

Signalling Screen Local Management 3-57 3.17 SIGNALLING SCREEN The Signalling screen is used to set the parameters for all SVCs, to view the Integrated Local Management Interface (ILMI) Physical Address, view the current version of UNI being used by the VHSIM2-A6DP, to disable ILMI and UNI, and to r...

Signalling Screen Local Management 3-59 3.17.1 Changing the UNI Version To change the UNI Version perform the following steps: 1. Use the arrow keys to highlight the ILMI Status field. 2. Use the SPACE bar to toggle the field until the option Enabled displays. 3. Use the arrow keys to highlight the ...

Signalling Screen 3-60 Local Management 3.17.3 Changing the UNI Status To change the UNI status from the default state of Enabled, perform the following steps: 1. Use the arrow keys to highlight the UNI Status field. 2. Press the SPACE bar until the option Disabled displays. 3. Use the arrow keys to...

Traffic Management Screen Local Management 3-61 3.18 TRAFFIC MANAGEMENT SCREEN The Traffic Management screen is used to set up profile index traffic descriptors. Once the descriptors are set up, they can be assigned to PVCs created in Connection Setup or LEC Transmit Queue screens. To access the Tra...

Traffic Management Screen 3-62 Local Management Traffic Category (Selectable) Used to choose the traffic category for the selected name. UBR (Unspecified Bit Rate) is the default, and the choices are CBR (Constant Bit Rate), nrt-VBR (non real time Variable Bit Rate), and ABR (Available Bit Rate). Fo...

Traffic Management Screen Local Management 3-63 3.18.1 Setting up a Descriptor Profile To set up a descriptor profile, perform the following steps: 1. Use the arrow keys to highlight the Profile Index field.Use the space bar to toggle, or enter the number of the index to be described. 2. Use the arr...

Discovery ELAN Setup Screen 3-64 Local Management 3.19 DISCOVERY ELAN SETUP SCREEN The ATM Discovery ELAN Setup screen is displayed only when the host device is configured to operate as a SecureFast switch. Upon first initialization, the VHSIM2-A6DP attempts to contact any other VHSIM2-A6DPs present...

LANVIEW LEDs 4-1 4 LANVIEW LEDs This chapter describes how to use the LANVIEW LEDs to monitor VHSIM2-A6DP status and diagnose VHSIM2-A6DP problems. Figure 4-1 shows the location of the LANVIEW LEDs (Transmit, Receive, STS and LNK). 4.1 VHSIM2-A6DP LEDs Refer to Table 4-1 and Table 4-2 for a descript...

VHSIM2-A6DP LEDs 4-2 LANVIEW LEDs Table 4-1 VHSIM2-A6DP LEDs LED Color Definition Off None No activity. TX(Transmit) Green (Flashing) Cells being transmitted. RX(Receive) Green (Flashing) Cells being received. NOTE: All APIMs and VAPIMs share the same LEDs. Table 4-2 APIM LEDs LED Color Definition L...

VHSIM2-A6DP Specifications A-1 A VHSIM2-A6DP Specifications This Appendix describes environmental specifications and safety requirements for the VHSIM2-A6DP. Enterasys Networks reserves the right to change these specifications at any time without notice. A.1 SPECIFICATIONS Environment Regulatory Com...

APIM and VAPIM Specifications B-1 B APIM and VAPIM Specifications This appendix provides specifications for Enterasys Networks APIMs and VAPIMs. B.1 APIM-21 SPECIFICATIONS Figure B-1 APIM-21 Physical Interface: OC3 Media Type: Multimode Fiber Data Rate: 155 Mbps Connector Type: SC Transmit Power: -1...

APIM-29 Specifications B-2 APIM and VAPIM Specifications B.2 APIM-29 SPECIFICATIONS Figure B-2 APIM-29 Physical Interface: OC3 Media Type: Single Mode Fiber Data Rate: 155 Mbps Connector Type: SC Transmit Power: -8 db to -14 db Receive Sensitivity: -6 db to -32.5 db Loss Budget: -8 db to -24.5 db Wa...

APIM-29LR Specifications APIM and VAPIM Specifications B-3 B.3 APIM-29LR SPECIFICATIONS Figure B-3 APIM-29LR Physical Interface: OC3 Media Type: Single Mode Fiber Data Rate: 155 Mbps Connector Type: SC Transmit Power: 0 db to -5 db Receive Sensitivity: -31 db Loss Budget: -26 db to -31 db Wavelength...

APIM-22 Specifications B-4 APIM and VAPIM Specifications B.4 APIM-22 SPECIFICATIONS The APIM-22R is considered an ATM User Device and therefore has a different signal pin assignment than the ATM Network Equipment as specified by the ATM Forum User-Network Interface (UNI) specification. Figure B-4 sh...

APIM-67 Specifications APIM and VAPIM Specifications B-5 B.5 APIM-67 SPECIFICATIONS The APIM-67 conforms to the electrical characteristics specified by ANSI T1.404-1989 Carrier-to-Customer Installation-DS3 Metallic Interface Specification, Section 5.12 Grounding Arrangements. In accordance with this...

APIM-67 Specifications B-6 APIM and VAPIM Specifications Figure B-5 APIM-67R Default Jumper Settings Figure B-6 APIM-67 2825_32 APIM-67R STSLNK RECEIVE CHANNEL JUMPER (GROUNDED) TRANSMIT CHANNEL JUMPER (NOT GROUNDED) 2825_31

VAPIM-31 Specifications APIM and VAPIM Specifications B-7 B.6 VAPIM-31 SPECIFICATIONS Figure B-7 VAPIM-31 Physical Interface: OC12 Media Type: Multimode Fiber Data Rate: 622 Mbps Connector Type: SC Transmit Power: -14 db to -22.5 db Receive Sensitivity: -14 db to -26 db Loss Budget: -12 db to -14 db...

VAPIM-39 Specifications B-8 APIM and VAPIM Specifications B.7 VAPIM-39 SPECIFICATIONS Figure B-8 VAPIM-39 Physical Interface: OC12 Media Type: Single Mode Fiber Data Rate: 622 Mbps Connector Type: SC Transmit Power: -8 db to -15 db Receive Sensitivity: -28 db Loss Budget: -13 db to -20 db Wavelength...

VAPIM-39LR Specifications APIM and VAPIM Specifications B-9 B.8 VAPIM-39LR SPECIFICATIONS Figure B-9 VAPIM-39LR Physical Interface: OC12 Media Type: Single Mode Fiber Data Rate: 622 Mbps Connector Type: SC Transmit Power: +2 db to -3 db Receive Sensitivity: -34 db to 36 db Loss Budget: -29 db to -38...