Enterasys Networks G3G124-24 - Manuals

iv ѻ ѻક䇈ᯢк䰘ӊ Supplement to Product Instructions ᳝↦᳝ᆇ⠽䋼៪ܗ㋴ (Hazardous Substance) 䚼ӊৡ⿄ (Parts) 䪙 3E ∲ +J 䬝 &G ݁Ӌ䫀 &U ໮⒈㘨㣃 3%% ໮⒈Ѡ㣃䝮 3%'( 䞥ሲ䚼ӊ (Metal Parts) h ƻ ƻ ƻ ƻ ƻ ⬉䏃῵ഫ ( Circuit Modules) h ƻ ƻ ƻ ƻ ƻ ⬉㓚ঞ⬉㓚㒘ӊ ( Cables & Cable Assemblies) h ƻ ƻ ƻ ƻ ƻ ล᭭੠㘮ড়⠽䚼ӊ (Plastic and Polymeric parts...

v Safety Information Class 1 Laser Transceivers The single mode interface modules use Class 1 laser transceivers. Read the following safety information before installing or operating these modules. The   Class   1   laser   transceivers   use   an   optical   feedback   loop   to   maintain   Class ...

vi Declaration of Conformity Application   of   Council   Directive(s): 2004/108/EC2006/95/EC Manufacturer ’s   Name: Enterasys Networks, Inc. Manufacturer ’s   Address: 50   Minuteman   Road Andover,   MA   01810 USA European   Representative   Name: Enterasys Networks,   Ltd. European   Representa...

vii E NTERASYS N ETWORKS , I NC . F IRMWARE L ICENSE A GREEMENT BEFORE OPENING OR UTILIZING THE ENCLOSED PRODUCT, CAREFULLY READ THIS LICENSE AGREEMENT. This   document   is   an   agreement   (“Agreement”)   between   the   end   user   (“You”)   and   Enterasys   Networks,   Inc.,   on   behalf   ...

xi Contents About This Guide Who Should Use This Guide ............................................................................................................................ xvHow to Use This Guide ...................................................................................................

xii Chapter 3: Troubleshooting Checking the LEDs ......................................................................................................................................... 3-2 SYSTEM LED .....................................................................................................

xiii Tables 2-1 Power Distribution According to Number of Installed Power Supplies ............................................... 2-6 2-2 Console Port Pinout.......................................................................................................................... 2-15 2-3 RJ45 to DB...

Enterasys G-Series Hardware Installation Guide xv About This Guide This   guide   provides   an   overview,   specifications   and   instructions   for   installing   the   Enterasys ®   G ‐ Series   Ethernet   Switch   in   a   standard   19 ‐ inch   equipment   rack   or   on   a   suitable   flat...

Document Conventions xvi About This Guide Document Conventions The   following   typographical   conventions   and   icons   are   used   in   this   guide. Commonly Used Acronyms The   following   acronyms   are   used   extensively   throughout   this   guide: • IOM   –   Input/Output   Module • L...

Getting Help Enterasys G-Series Hardware Installation Guide xvii Getting Help For   additional   support   related   to   the   G ‐ Series   switch,   the   IOMs,   or   this   document,   contact   Enterasys Networks   using   one   of   the   following   methods: Before   contacting   Enterasys Ne...

Enterasys G-Series Hardware Installation Guide 1-1 1 Introduction The   G ‐ Series   Ethernet   switch   is   a   modular,   high ‐ density   switch   designed   to   handle   networking   demands   in   commercial   and   institutional   settings,   including   education,   government,   and   fina...

Features 1-2 Introduction Figure 1-2 G3G124-24 Switch (rear view) with 1200 and 400-watt power supplies installed Features The   G ‐ Series   switches   include   the   following   features: • A   base   system   (chassis)   containing   fixed   interfaces   in   the   lower   left   front   panel –...

Features 1-4 Introduction PoE (Power over Ethernet) Support The   G3G124 ‐ 24P   switch   is   802.3af   compliant   out ‐ of ‐ box.   The   G3G124 ‐ 24   and   the   G3G ‐ 24TX   IOM   can   be   equipped   with   user ‐ installed   optional   PoE   modules   to   make   them   802.3af   compliant....

Unpacking the G-Series Switch 2-2 Installation Unpacking the G-Series Switch Shipped With the Switch Inspect   the   contents   for   any   signs   of   physical   damage.   Contact   Enterasys Networks   if   it   is   damaged.   Refer   to   “Getting   Help ”    on   page xvii   for   details.   T...

Order of Installation Steps Enterasys G-Series Hardware Installation Guide 2-3 Order of Installation Steps Once   a   suitable   site   has   been   chosen,   proceed   to   install   the   G ‐ Series   Ethernet   switch   components.   It   is   recommended   that   the   installation   proceed   i...

Mounting the Switch 2-4 Installation Placing the Switch on a Flat Surface When   installing   the   switch   on   a   flat   surface,   the   installation   of   the   rubber   feet   is   recommended   to   prevent   the   switch   from   sliding.   Also,   the   surface   must   be   able   to   s...

Power Supply Installation Considerations Enterasys G-Series Hardware Installation Guide 2-5 Figure 2-1 Attaching the Brackets to the Switch (G3G124-24 with G3G-24TX IOM shown) 3. Using   your   mounting   hardware,   attach   the   front   of   the   brackets   to   the   rack.   Tighten   securely....

Power Supply Installation Considerations 2-6 Installation By   default,   the   G3   switch   automatically   allots   power   to   the   base   board   and   to   each   installed   module.   Each   component’s   power   consumption   is   subtracted   from   the   available   power   and   the   r...

Power Supply Installation Considerations Enterasys G-Series Hardware Installation Guide 2-7 Allocation of PoE Power to Modules The   G ‐ Series   firmware   determines   the   power   available   for   PoE   based   on   hardware   configuration,   power   supply   status,   and   power   supply   r...

Installing a Power Supply 2-8 Installation Power Supply Addition or IOM Removal When   a   power   supply   is   added   or   an   IOM   is   removed,   the   G3   responds   to   the   increase   in   available   power   by: 1. Detecting   the   power   supply   addition   and   recalculating   ava...

Removing a Power Supply Enterasys G-Series Hardware Installation Guide 2-9 6. With   the   power   supply   properly   inserted   into   the   opening,   carefully   slide   the   module   until   it   connects   to   the   backplane,   as   shown   in   Figure 2 ‐ 2   on   page 2 ‐ 9.   The   modul...

Installing and Removing an IOM 2-10 Installation Installing and Removing an IOM Installing an Optional PoE Module on the G3G-24TX IOM If   you   have   purchased   an   optional   PoE   card   (G3G ‐ POE),   you   can   install   it   before   installing   the   G3G ‐ 24TX   IOM   into   the   G ‐ S...

Installing and Removing an IOM Enterasys G-Series Hardware Installation Guide 2-11 Figure 2-3 Installing a PoE module in the G3G-24TX IOM 4. Using   the   screws   shipped   with   the   PoE   module,   firmly   attach   the   PoE   module   to   the   IOM. Installing an IOM The   following   proced...

Installing and Removing an IOM 2-12 Installation 3. Unpack   the   module   by   taking   it   from   its   shipping   box   and   removing   any   packaging   materials,   and   removing   the   module   from   its   protective   plastic   bag.   (Save   the   shipping   box   and   materials   in ...

Connecting Power to the Switch Enterasys G-Series Hardware Installation Guide 2-13 When   you   install   an   IOM   into   a   slot   that   previously   had   an   IOM   installed,   then: • If   the   IOM   being   installed   is   the   same   type   as   the   previous   IOM,   the   old   conf...

Connecting to the Console Port 2-14 Installation 2. Plug   the   other   end   of   each   power   cord   into   an   appropriate,   dedicated   grounded   AC   outlet   as   follows.   • G3 ‐ PWR ‐ POE   requires   a   20   Amp   circuit.   • G3 ‐ PWR   requires   a   15   Amp   circuit. 3. Verify ...

Connecting to the Console Port Enterasys G-Series Hardware Installation Guide 2-15 To   connect   to   the   console   port: 1. Connect   the   RJ45   connector   at   one   end   of   the   cable   to   the   RJ45   console   port   on   the   G ‐ Series   switch. 2. Plug   the   RJ45   connector  ...

Connecting to the Network 2-16 Installation Connecting to the USB Console Port In   addition   to   its   RJ45   console   port,   the   G ‐ Series   switch   also   supports   console   operation   through   a   USB   console   port.   To   connect,   you   will   need   the   following   user ‐ su...

Connecting to the Network Enterasys G-Series Hardware Installation Guide 2-17 Figure 2-5 Connecting a UTP Cable Segment to RJ45 Port 3. Verify   that   a   link   exists   by   checking   that   the   Link/Activity   LED   is   on   (solid   green   or   blinking   green).   If   the   Link/Activity...

Connecting to the Network Enterasys G-Series Hardware Installation Guide 2-19 Figure 2-9 Eight-Wire Straight-Through Cable RJ45 Pinouts for 10/100/1000BASE-TX To   connect   twisted   pair   segments   to   the   G ‐ Series switch,   refer   to   Figure 2 ‐ 5   on   page 2 ‐ 17   and   connect   the...

Connecting to the Network Enterasys G-Series Hardware Installation Guide 2-21 Removing an XFP/SFP To   remove   a   transceiver   from   a port   slot,   refer   back   to   Figure 2 ‐ 10   on   page 2 ‐ 20   and   proceed   as   follows: 1. With   an   antistatic   wrist   strap   attached   to   y...

Completing the Installation 2-22 Installation 2. Insert   the   cable   connector   into   the   SFP/XFP   connector   until   it   clicks   into   place. Figure 2-11 Cable Connection (LC shown) to Uplink Port with SFP/XFP Installed 3. Plug   the   other   end   of   the   cable   into   the   appro...

Installing an Optional PoE Module in the G3G124-24 Switch Enterasys G-Series Hardware Installation Guide 2-23 c. For   details   on   how   to   configure   the   G ‐ Series   using   the   command   line   interface,   refer   to   the   Enterasys   G ‐ Series   CLI   Reference .   The   CLI   comm...

Installing an Optional PoE Module in the G3G124-24 Switch 2-24 Installation Figure 2-12 Screw and Coverplate Removal for Removing the G3G124-24 Cover 2. Using   a   Phillips   screwdriver   and   a   counter ‐ clockwise   motion,   remove   all   necessary   screws. 3. Retain   screws   and   the   ...

Enterasys G-Series Hardware Installation Guide 3-1 3 Troubleshooting This   chapter   contains   instructions   on   troubleshooting   the   G ‐ Series   Ethernet   switch   as   required.   This   can   include: For information about... Refer to page... Checking the LEDs 3-2 Using the Password Rese...

Checking the LEDs 3-2 Troubleshooting Checking the LEDs The   following   sections   define   the   behavior   of   the   LEDs   on   the   G ‐ Series   Ethernet   switch   chassis   and   on   the   IOMs.   Refer   to   Figure 3 ‐ 1   for   the   location   of   the   LEDs   on   the   chassis   an...

Checking the LEDs Enterasys G-Series Hardware Installation Guide 3-3 Power LEDs The   two   power   LEDs,   marked   PWR1   and   PWR2,   indicate   voltage   for   the   primary   and   secondary   power   inputs.   Table 3 ‐ 2   describes   their   status. IOM Status LEDs The   three   IOM   statu...

Using the Password Reset Button 3-4 Troubleshooting Using the Password Reset Button If   you   forget   the   G ‐ Series   login   password,   use   the   password   reset   button   to   reset   the   password   to   the   default   value   as   described   in   the   following   procedure.   To   ...

Removing the Switch from a Rack Enterasys G-Series Hardware Installation Guide 3-5 Removing the Switch from a Rack To   remove   the   G ‐ Series   Ethernet   switch   from   a   rack: 1. While   supporting   the   switch   so   it   does   not   fall,   carefully   remove   the   mounting   screws ...

Enterasys G-Series Hardware Installation Guide A-1 A Specifications This   appendix   provides   information   about   the   following: Enterasys Networks   reserves   the   right   to   change   the   specifications   at   any   time   without   notice. Switch Specifications Table A ‐ 1   provides ...

Power Supply Specifications Enterasys G-Series Hardware Installation Guide A-3 Power Supply Specifications The   G ‐ Series   switch   accepts   up   to   two   G3 ‐ PWR   or   G3 ‐ PWR ‐ POE   power   supplies,   or   a   combination   of   the   two.   Table A ‐ 2   provides   the   specifications...

PoE Daughter Card Specifications A-6 Specifications PoE Daughter Card Specifications Table A ‐ 6   provides   the   specifications   for   the   G3G ‐ POE   daughter   card. Torque Values Table A ‐ 7   lists   the   recommended   torque   values   to   use   when   installing   the   G ‐ Series   sw...

1-Gigabit Ethernet and 100Base-FX Transceiver (SFP) Specifications A-8 Specifications MGBIC-02 Specifications (1000BASE-T) MGBIC-LC03 Specifications (1000BASE-SX) MGBIC-LC04 Specifications (100BASE-FX) Table A-11 MGBIC-02 Specifications Item Specification Supported Cable Type: Maximum Length Copper,...

1-Gigabit Ethernet and 100Base-FX Transceiver (SFP) Specifications Enterasys G-Series Hardware Installation Guide A-9 MGBIC-LC05 Specifications (100BASE-FX) MGBIC-LC07 Specifications (1000BASE-ELX) Table A-15 MGBIC LC04 Operating Range Item 1310 nm Range 9 or 10 µm SMF N/A 2,000 Meters Table A-16 MG...

1-Gigabit Ethernet and 100Base-FX Transceiver (SFP) Specifications A-10 Specifications MGBIC-08 Specifications (1000BASE-ELX) MGBIC-LC09 Specifications (1000BASE-LX) Table A-20 MGBIC-08 Optical Specifications Item Transmit Power (minimum) -0 dBm, min. +2 dBm, typical +5 dBm, max. Receive Sensitivity...

10-Gigabit Ethernet Transceiver (XFP) Specifications Enterasys G-Series Hardware Installation Guide A-11 10-Gigabit Ethernet Transceiver (XFP) Specifications The   10 ‐ Gigabit   Small   Form   Factor   Pluggable   (XFP)   interface   port   slots   on   the   G3   modules   support   various   opti...

Regulatory Compliance A-12 Specifications Regulatory Compliance This   product   meets   the   safety,   electromagnetic   compatibility   (EMC),   and   environmental   requirements   listed   in   Table A ‐ 26 : Table A-26 Compliance Standards Regulatory Compliance Standards Safety UL 60950-1, FDA...

Index-1 Index Numerics 100Base-FX Transceiver (SFP) specifications A-7 10-Gigabit Ethernet Transceiver Specifications (XFP) A-11 1-Gigabit Ethernet and 100Base-FX Transceiver (SFP) Specifications A-7 A AC input specifications A-2 , A-4 , A-5 , A-6 C Connecting to the network 2-16 Console port connec...