Enterasys Networks DFE-256MB-UGK - Manuals

Preparation Page 2 of 5 PN 9033946 Preparation The DIMM is located on the main pc board assembly of the DFE Series Module. In some cases, depending on the module to be upgraded, it may be necessary to remove a daughter board to gain access to the existing DIMM. For information about the location and...

DIMM Replacement Procedure PN 9033946 Page 3 of 5 DIMM Replacement Procedure Although the following replacement procedure describes how to replace a DIMM in an angled connector, the procedure also applies to DIMM replacement in a vertical connector. Removing the Existing DIMM Refer to Figure 1 and p...

Completing the Installation Page 4 of 5 PN 9033946 3. Push the DIMM ➁ further into the connector until the two DIMM alignment notches ➄ and the tabs on the two connector arms ➀ lock the DIMM into place. Figure 2 Installing the DIMM Completing the Installation To complete the installation, proceed as...