Enterasys Networks 2E43-27R) - Manuals

9032073 E2 v Figures Chapter 1 Introduction Figure 1-1. Using Double-Click Zones to Access SPECTRUM Views ................................... 1-3 Figure 1-2. Using the Icon Subviews Menu to Access SPECTRUM Views .......................... 1-4 Figure 1-3. Accessing Device-Specific Subviews .............

9032073 E2 vii Tables Chapter 2 Device Views Table 2-1. Interface Icon Subviews Menu .............................................................................. 2-4 Table 2-2. Administrative Status for the Physical or MIB II Application ........................... 2-4 Table 2-3. Administrative St...

9032073 E2 ix Preface Use this guide as a reference for the SPECTRUM Fast Ethernet SmartSwitch Module management software. Before using this guide, you should be familiar with SPECTRUM’s functions and navigational techniques as described in the Administrator’s Reference and the Operator’s Reference ...

Conventions Preface Fast Ethernet SmartSwitch Module x Management Module Guide Conventions This guide uses the following conventions: • Menu selections and buttons referenced in text appear in bold ; for example, Configuration or Detail . • Buttons appear as shadowed boxes when describing their use;...

9032073 E2 Preface xi Other Related Documentation Other Related Documentation Refer to the following documentation for more information on managing TCP/IP-based networks: Martin, James, Kathleen Kavanagh Chapman, Joe Leben. Local Area Networks, Architectures and Implementations , 2nd ed. Englewood C...

9032073 E2 1-1 Chapter 1 Introduction What Is in This Chapter This chapter introduces the SPECTRUM management module covering the Fast Ethernet SmartSwitch Modules described below. It describes the following: • Fast Ethernet SmartSwitch Modules• SPECTRUM Support - Accessing SPECTRUM Views from the D...

SPECTRUM Support Introduction Fast Ethernet SmartSwitch Module 1-2 Management Module Guide The 2E43-27 and 2E43-27R provide the same feature set as the 2E42-27 and 2E42-27R but come equipped with two RJ21 connectors to support 24 ports of switched Ethernet rather than the 24 RJ45’s. This allows the ...

SPECTRUM Views Roadmap Introduction Fast Ethernet SmartSwitch Module 1-6 Management Module Guide SPECTRUM Views Roadmap Figure 1-4 shows a “roadmap” of the SPECTRUM views for this device. These views are accessible from double-click zones (Figure 1-1) and Icon Subviews menus (Figure 1-2 and Figure 1...

SPMA Support Introduction Fast Ethernet SmartSwitch Module 1-8 Management Module Guide SPMA Support SPECTRUM also supports SPECTRUM Portable Management Application (SPMA) functionality for these devices. Figure 1-5 shows an example of an SPMA Applications view. To open the SPMA Applications view, do...

9032073 E2 2-1 Chapter 2 Device Views What Is in This Chapter This chapter describes the following Device views and subviews available for the Fast Ethernet SmartSwitch Modules. • Interface Device view• Chassis Device view• Physical Device view Refer to Chapter 1, Introduction, for information on ac...

9032073 E2 Device Views 2-3 Interface Device View Interface Icon Interface Icon These icons represent the interfaces or ports of the device. The icons identify the type of interface or port (e.g., Ethernet) and provide statistical information. Figure 2-2 shows an example of an Interface icon, its Ic...

9032073 E2 Device Views 2-5 Interface Device View Interface Icon Interface Type Label This label displays the interface type. Table 2-4 lists the possible interface types. Table 2-3. Administrative Status for the Bridging Application Color Status Description Green FWD Bridge port is forwarding. Blue...

Interface Device View Interface Icon Device Views Fast Ethernet SmartSwitch Module 2-6 Management Module Guide MAC Address Label This label displays the MAC address of the device interface. Double-click this label to open the CSI Interface Port Model Information View display described in the Operato...

9032073 E2 Device Views 2-7 Interface Device View Interface Options Panel Gauge Label This label displays the performance statistic determined by the Gauge Control Panel for this interface. (Refer to the Gauge Control Panel description later in this chapter for more information.) Double-click this l...

9032073 E2 Device Views 2-13 Chassis Device View Chassis Device Icon Device Type Label This label identifies the type of device. (Refer to Figure 2-5.) Double-click this area to open the Device Configuration view described in Chapter 3, Configuration Views. Device Icon Subviews Menu Table 2-7 lists ...

Chassis Device View Chassis Device Icon Device Views Fast Ethernet SmartSwitch Module 2-14 Management Module Guide Interface Labels These labels identify the number and activity status of each port. (Refer to Figure 2-5.) Table 2-9 and Table 2-10 list the possible states relative to the application ...

Chassis Device View Chassis Device Icon Device Views Fast Ethernet SmartSwitch Module 2-16 Management Module Guide Logical Ports Labels These labels provide access to the Logical Port Icon Subviews menu. Double-click a label to open the Port Configuration View. Logical Ports Icon Subviews Menu Table...

9032073 E2 3-1 Chapter 3 Configuration Views What Is in This Chapter This chapter describes the Configuration views available for the Fast Ethernet SmartSwitch Modules. These views display network configuration and operating information for the device and its interfaces. The following Configuration ...

Device Configuration View Configuration Views Fast Ethernet SmartSwitch Module 3-2 Management Module Guide Device Configuration View This view provides device -specific configuration information as well as access to other views that allow you to configure device components. Device Configuration Info...

9032073 E2 Configuration Views 3-3 Device Configuration View Interface Configuration Table Information Interface Configuration Table Information This table within the Device Configuration view provides the following configuration information about the device’s interfaces or ports. Number of Interfac...

9032073 E2 Configuration Views 3-5 Port Configuration - CSIIfPort View Port Configuration - CSIIfPort View This view provides information on the configuration and operating status of the device interfaces or ports. To access the Port Configuration - CSIIfPort view for a particular interface or port,...

FddiMAC Device Configuration View Configuration Views Fast Ethernet SmartSwitch Module 3-6 Management Module Guide FddiMAC Device Configuration View The FddiMAC Device Configuration view provides configuration and operating status information. To access this view, do the following: 1. Highlight the ...

Port Configuration View SMT Information Configuration Views Fast Ethernet SmartSwitch Module 3-8 Management Module Guide SMT Information This section of the FddiMAC Device Configuration view provides the following configuration information on the FDDI SMT: SMT VersionThe version of Station Managemen...

9032073 E2 4-1 Chapter 4 Event and Alarm Messages What Is in This Chapter This chapter lists the types of events and alarms generated by the Fast Ethernet SmartSwitch Modules and provides any probable cause messages corresponding to these alarms. Device Events and Alarms Table 4-1 lists the SPECTRUM...

9032073 E2 5-1 Chapter 5 Application Views What Is in This Chapter This chapter describes the device-specific applications listed below for the Fast Ethernet SmartSwitch Modules. The corresponding application model type is shown in parentheses. • Interface Remap (CtIfRemapApp)• Fast Ethernet (FastEn...

Device Application View Application Views Fast Ethernet SmartSwitch Module 5-2 Management Module Guide The following major application is available if you purchase the associated Cabletron product. The application is described within the documentation supplied with the product. • Standard RMON (RMON...

9032073 E2 Application Views 5-5 Interface Remap Application Interface Remap Application The name of the model type used to model the application is CtIfRemapApp. The application provides the ability to map one or more interfaces to another interface. A map is defined by creating a row in the Interf...

9032073 E2 Application Views 5-7 Fast Ethernet Application Fast Ethernet Application The name of the model type used to model the application is FastEnetApp. The application provides the Fast Ethernet Port Table and Fast Ethernet Configuration view, which allow you to configure ports for Ethernet or...

Fast Ethernet Application Fast Ethernet Configuration View Application Views Fast Ethernet SmartSwitch Module 5-8 Management Module Guide Figure 5-4. Fast Ethernet Configuration View Operational Mode These selections indicate the current operational mode of this port. If you select Auto-Negotiation,...

9032073 E2 Application Views 5-9 Fast Ethernet Application Fast Ethernet Configuration View Advertised Ability These selections indicate the advertised ability of the local hardware. They become active on ports that have Auto-Negotiation enabled. Auto-Negotiation allows the FE-100TX RJ-45 port to se...

Fast Ethernet Application Fast Ethernet Configuration View Application Views Fast Ethernet SmartSwitch Module 5-10 Management Module Guide Received Technology These selections indicate the advertised ability of the remote hardware or link partner. These modes are read-only. Table 5-3 lists the Recei...

9032073 E2 Application Views 5-11 FDDI FNB Application FDDI FNB Application This section describes the FDDI FNB application supported by this device. The name of the model type used to model the application is FddiMAC. This application is available when the appropriate High Speed Interface Module (H...

9032073 E2 Application Views 5-13 ATM Client Application ATM Client Application This section describes the ATM Client application supported by this device. This application is available when the appropriate High Speed Interface Module (HSIM) is installed. Table 5-6 lists the application-specific sub...

9032073 E2 Application Views 5-17 Download Application View Cross Connect IdThis object is implemented only for a VCL that is cross-connected to other VCLs that belong to the same VCC. All such associated VCLs have the same value of this object, and all their cross-connections are identified by entr...

9032073 E2 1 Index Numerics 2E42-27 1-1 2E42-27R 1-1 2E43-27 1-1 2E43-27R 1-1 8H02-16 1-1 A A_Port 3-8 Accessing Device-Specific Subviews 1-5 SPECTRUM Views 1-2 , 1-6 Address Canonical 5-12 MAC 2-6 , 3-4 Mac 3-7 Network 2-7 Administrative Status Label 2-4 Alarm Link Error Rate 3-9 Alarm Messages 4-1...