Empire Comfort Systems VFFB-36D - Manuals

R-5010 8 Attach the cover plate behind the bottom louver with four (4)screws, provided to the support legs on the back left side of thefirebox, as shown in Fig. 9. Attach the (2) screws for damper rodbracket to the bottom of the hearth pan, while holding the damperrod bracket with the flange facing ...

R-5010 9 C-7. INSTALLING THE HOOD. A black hood is furnished with each model VFFB36/42D fireplace and MUST be installed before the fireplace is used.Failure to do so may create a possible fire hazard. If brass hoods are desired, they can be purchased as an option.Attachment is the same, as our stand...

R-5010 10 F MAINTENANCE. Keep the control compartment, logs and burner area surrounding the logs clean by vacuuming or brushing area at leasttwice a year. THE LOGS CAN GET VERY HOT – HANDLE ONLY WHEN COOL.Always turn off gas to the pilot before cleaning. For relighting, refer to lighting instruction...

R-5010 12 H REPLACEMENT PARTS. Contact the factory for questions concerning prices and policies covering these replacement parts. Parts will be shipped atprevailing prices. Normally, all parts can be ordered through your Empire Comfort Systems, Inc. distributor or dealer. When ordering repair parts,...

R-5010 14 INSTALLING OPTIONAL LOUVERAttention: Remove protective film on brass louver beforeinstallation. Attention: The optional top louver has (4) mounting tabs.The optional bottom louver has (2) clearance holes. 1. Remove (2) Phillips screws that attach upper, panel front to casing top. 2. At the...