Page 2 - Product Data Document; ControlWave GFC Plus; Remote Automation Solutions; tions for “chart replacements” and flow computers,; Control; fiberglass enclosure that has provisions for not only; Specifications – Package; recommended a kit for affixing to a 2” pipe or
Product Data Document 1660ds9b / D301294X012 October 2011 - Page 2 ControlWave GFC Plus Remote Automation Solutions www.EmersonProcess.com/Remote Additional, standard application programs will • be introduced on a continual basis.TeleFlow users will appreciate the compatibility • of ControlWave GFC ...
Page 3 - Specifications – Operating Environment; SELECTION ITEM DESCRIPTIONS AND
Product Data Document 1660ds9b / D301294X012 October 2011 - Page 3 ControlWave GFC Plus Remote Automation Solutions www.EmersonProcess.com/Remote www.ControlWave.com Specifications – Operating Environment Wide operating power input voltage range of 5.0 • to 18.0 VdcWhile this product can operate wit...
Page 4 - SENSOR ASSEMBLY; Physical Specifications – Sensor Assemblies; assembly for the first run and an external, smart
Product Data Document 1660ds9b / D301294X012 October 2011 - Page 4 ControlWave GFC Plus Remote Automation Solutions www.EmersonProcess.com/Remote SENSOR ASSEMBLY Using the sensor assembly, integrated in the instru- ment package is the easiest implementation for a single meter run; however, the stand...
Page 5 - MVT ASSEMBLY STATIC PRESSURE; Selection “E” specifies the housing, for which there; Features – Display/Keypads; Easy configuration via ACCOL III Function Block; Specifications – Display/Keypads; site, configuration and process data. The screens; The 2-button version is similar but includes only
Product Data Document 1660ds9b / D301294X012 October 2011 - Page 5 ControlWave GFC Plus Remote Automation Solutions www.EmersonProcess.com/Remote MVT ASSEMBLY STATIC PRESSURE ORIENTATION For a multivariable sensor assembly, you can spec- ify whether the static pressure sensor is oriented to the righ...
Page 6 - PROCESSOR/ MAIN ELECTRONICS; CONFIGURATION” section for specifications).; SELECTION; Specifications for Processor/Electronics
Product Data Document 1660ds9b / D301294X012 October 2011 - Page 6 ControlWave GFC Plus Remote Automation Solutions www.EmersonProcess.com/Remote PROCESSOR/ MAIN ELECTRONICS Expected Backup Time3 Serial Communication Ports (see below for • further information)2 DI/PI I/O points (please refer to the ...
Page 7 - CONTROLWAVE GFC PLUS STANDARD; The user’s interface to the Standard Ap-; Overview of the Standard Application Program
Product Data Document 1660ds9b / D301294X012 October 2011 - Page 7 ControlWave GFC Plus Remote Automation Solutions www.EmersonProcess.com/Remote CONTROLWAVE GFC PLUS STANDARD APPLICATION PROGRAM You can select from a variety of standard applica- tions. Currently available are the 1 – 2 run M&R ...
Page 8 - Average Specific Gravity
Product Data Document 1660ds9b / D301294X012 October 2011 - Page 8 ControlWave GFC Plus Remote Automation Solutions www.EmersonProcess.com/Remote Average Specific Gravity • Average Heating Value • Flow Time • Uncorrected Count • Each log entry also contains the date and time. ControlWave GFC Plus ha...
Page 9 - Communication Port Configuration for the Standard; POWER SYSTEM
Product Data Document 1660ds9b / D301294X012 October 2011 - Page 9 ControlWave GFC Plus Remote Automation Solutions www.EmersonProcess.com/Remote Communication Port Configuration for the Standard Application Program COM1 – Local RS 232 port for configuration via a PC. Flash configuration is BSAP Sla...
Page 10 - Specifications – Charge Regulator and; HAZARDOUS AREA CERTIFICATION; Class I, Division 2 certification can be specified.; BENDABLE RTD; The bendable RTD is a “one size fits all” solution
Product Data Document 1660ds9b / D301294X012 October 2011 - Page 10 ControlWave GFC Plus Remote Automation Solutions www.EmersonProcess.com/Remote Specifications – Charge Regulator and AUX Output A charge regulator and AUX output are included on the Processor/Main Electronics board. Please note that...
Page 11 - RTD Interface Information; coefficients of a custom calibrated RTD, another; RTD Input Specifications; These specifications are for the interface, only, not; THERMOWELL OPTIONS FOR RTD; input to 21.4 Vdc for field devices such as transmit
Product Data Document 1660ds9b / D301294X012 October 2011 - Page 11 ControlWave GFC Plus Remote Automation Solutions www.EmersonProcess.com/Remote RTD Interface Information A three-wire platinum RTD per DIN 43760 is sup- ported. The temperature, T, in degrees Celsius is calculated using the Resistan...
Page 12 - Specifications for 21V dc/dc Power Supply
Product Data Document 1660ds9b / D301294X012 October 2011 - Page 12 ControlWave GFC Plus Remote Automation Solutions www.EmersonProcess.com/Remote Specifications for 21V dc/dc Power Supply Input voltage: 10.8 to 16.0 Vdc • Input current: Will be double the current draw of • the output device, e.g. 1...
Page 13 - Configuration: Open Drain MOSFET
Product Data Document 1660ds9b / D301294X012 October 2011 - Page 13 ControlWave GFC Plus Remote Automation Solutions www.EmersonProcess.com/Remote Maximum scan rate: once per 250 ms • Electrical isolation: None • Surge Suppression: meets ANSI/IEEE C37.90- • 1978; 30V transorb between signal and grou...
Page 14 - Power Consumption Information, Processor, Main; The figures, below, assume that the standard ap; POWER DISTRIBUTION BOARD; This option, specified in Selection “O,” organizes; RELAY BOARD; Express; ‘C’ configuration corresponding to two discrete
Product Data Document 1660ds9b / D301294X012 October 2011 - Page 14 ControlWave GFC Plus Remote Automation Solutions www.EmersonProcess.com/Remote 1-5 Vdc @ 5mA max, 11 to 30 Vdc external • sourceD/A resolution: 12 bit • Maximum update rate: once per 250 ms • Accuracy: • 0.1% of span @ 25oC for curr...
Page 15 - Specifications for the Relay Board; POLYPHASER OPTION FOR RADIO; If a radio is specified, you can specify whether or; MODEM OR RADIO OPTION; separately, Emerson offers “radio ready” configura; Modem Specifications; Modem Configuration: “AT” based commands.
Product Data Document 1660ds9b / D301294X012 October 2011 - Page 15 ControlWave GFC Plus Remote Automation Solutions www.EmersonProcess.com/Remote Specifications for the Relay Board Terminations Pluggable terminal block, maximum wire size is • 14 gauge Input Requirements Power Source Range: 3-15 Vdc...
Page 16 - Radio Specifications; For specifications on the radios, please refer to the; ACCESSORIES; PC CABLES; CD is the “BSI Config” CD, which also contains the
Product Data Document 1660ds9b / D301294X012 October 2011 - Page 16 ControlWave GFC Plus Remote Automation Solutions www.EmersonProcess.com/Remote Voltage); 1.0 mA (Max) @ 6V (Input Voltage) Surge Capability: Withstand surge of 100A with 10 x 160 microsecond waveform. Temperature: Operating Range: -...
Page 17 - PRODUCT FAMILY COMPATIBILITY; This family compatibility is a major benefit to users; Open standards for programming, network con-; architecture and bring the optimal process efficiency; ControlWave; products. ControlWave Designer includes all five
Product Data Document 1660ds9b / D301294X012 October 2011 - Page 17 ControlWave GFC Plus Remote Automation Solutions www.EmersonProcess.com/Remote PRODUCT FAMILY COMPATIBILITY ControlWave GFC Plus is compatible with Em- erson’s ControlWave family. It is fully software- compatible with ControlWave GF...
Page 18 - ACCOL III; blocks, ControlWave Designer brings the benefit
Product Data Document 1660ds9b / D301294X012 October 2011 - Page 18 ControlWave GFC Plus Remote Automation Solutions www.EmersonProcess.com/Remote ACCOL III In addition to the basic functions and function blocks, ControlWave Designer brings the benefit of many years experience in measurement and SCA...
Page 19 - DIMENSIONS; Integral, DP/P MVT assembly and Pole Mount hardware are shown.
Product Data Document 1660ds9b / D301294X012 October 2011 - Page 19 ControlWave GFC Plus Remote Automation Solutions www.EmersonProcess.com/Remote DIMENSIONS Integral, DP/P MVT assembly and Pole Mount hardware are shown.