Emerson 210-2000- Manuals

Carbon Dioxide Sensor Product Information Sheet 210-2000 Wiring The mounting plate has two sets of three-terminal connectors. The connector on the left side of the mounting plate is where sensor power and the signal- to-I/O-board connection is made. The connector on the right side is where connectio...

Carbon Dioxide Sensor Product Information Sheet 210-2000 Setting the Volts/Amps Switch The front of the circuit board has a switch that controls whether the analog output sends a signal as voltage (V) or milliamps (mA). To work with CPC I/ O boards, this switch should be set to voltage (the DOWN pos...

Carbon Dioxide Sensor Product Information Sheet 210-2000 Span The Span parameter determines whether you want to measure concentrations between 0-2000 ppm or 0- 5000 ppm. If set to 2000 ppm, the sensor’s analog output signal will be scaled properly so that the highest output voltage corresponds to 20...

Carbon Dioxide Sensor Product Information Sheet 210-2000 Wiring The mounting plate has two sets of three-terminal connectors. The connector on the left side of the mounting plate is where sensor power and the signal- to-I/O-board connection is made. The connector on the right side is where connectio...

Carbon Dioxide Sensor Product Information Sheet 210-2000 Setting the Volts/Amps Switch The front of the circuit board has a switch that controls whether the analog output sends a signal as voltage (V) or milliamps (mA). To work with CPC I/ O boards, this switch should be set to voltage (the DOWN pos...

Carbon Dioxide Sensor Product Information Sheet 210-2000 Span The Span parameter determines whether you want to measure concentrations between 0-2000 ppm or 0- 5000 ppm. If set to 2000 ppm, the sensor’s analog output signal will be scaled properly so that the highest output voltage corresponds to 20...