Page 2 - Parts List; ASSEMBLING THE FRAME; center joint
Parts List 1. Frame Parts x 6 pcs (4 top/bottom frame pcs. + 2 side frame pcs) 2. Tension Rods x 6 pcs (4 top/bottom rods + 2 side rods) 3. Screen Material x 1 pc 4. Center joints x 2 pcs 5. Elbow Joints x 4 pcs 6. Wall brackets x 2 – 3 pcs (depending on model/size) 7. Screws x 16 pcs 8. User Guide ...
Page 3 - elbow joint; connectors into the long horizontal frame
Please do not tighten the screws completely, to make sure the frame piece lines up correctly . 3. Insert both elbow joint connectors into the long horizontal frame (see fig.1) 4. (2) Push Push Short frame Short frame Push Push Joint Long frame ( fig.1)
Page 4 - fasten the four
Push Push ( fig.2) Insert the exposed ends of the joint connectors into the short (vertical) frame and align the four corners so that they meet at perfect right angles 4. Join all four frame parts together following the steps showed below. (fig.2) 5. After making sure that all four corners join at r...
Page 5 - Attaching the screen material to the frame; Lay out the screen and; on a clean and dry surface. Insert the screen; tension rods; to the back of
Tension Rod (Horizontal) x 4 Tension Rod (Vertical) x 2 Tension Rod (horizontal) Push Tension Rod (Vertical) Attaching the screen material to the frame 1. Lay out the screen and tension rods on a clean and dry surface. Insert the screen tension rods through the sleeves according to their correspondi...
Page 6 - Black backing for AcousticPro1080 models
Black backing for AcousticPro1080 models This procedure only applies to AcousticPro1080 models, disregard if your ezFrame is not an AcousticPro1080 variant. The black backing counters the effects of light penetration that would otherwise light up all items behind the screen and spoil the picture. ( ...
Page 7 - Attaching the Fix Plates; fix plates; support joiner; Center Support Bar
Attaching the Fix Plates ___ 1. Make sure that the material and frame are both lying face down on a clean, dry and non-abrasive surface. 2. Center the material inside the frame. Please note the material will be noticeably smaller because stretching the material is required to create a sufficient amo...
Page 8 - Installation; and push down at; Wall brackets
3. Slide the top end of the bar into the top center point location to complete center support bar installation. This will provide added stability to your frame and added tension to the material. Installation 1. Locate your desired installation location with a stud finder (recommended) and mark the d...
Page 9 - CAUTION; WARNING
CAUTION Please follow these instructions carefully to ensure proper maintenance and safety with your ezFrame Screen 1. When hanging the screen up, please make sure that no other objects such as power switches, outlets, furniture, ladders, windows, etc. occupy the space designated for your Fixed-Fram...
Page 10 - Warranty Policy; Please Visit this link for full Warranty information:
Warranty Policy Two (2) year warranty on parts and labor from defects in workmanship from purchase date as follows (except for refurbished units as specified below): Refurbished units carry a T 90-day T parts and labor warranty. Each party will be responsible for one way shipping during the wa...
Page 11 - Register your warranty at; US & Canada Tech Support & Warranty Claim; Europe Tech Support & Warranty Claim; Please contact us at; Asia or China Tech Support & Warranty Claim; Please contact us at; Taiwan Tech Support & Warranty Claim; Please contact us at; Elite Screens GmbH; Elite Screens China Ltd.; Elite Screens Taiwan Corp.; Latin America Contact:
Register your warranty at www.elitescreens.com/register.html US & Canada Tech Support & Warranty Claim Please contact us at [email protected] or call +1 877-511-1211 #3 Service Europe Tech Support & Warranty Claim Please contact us at [email protected] or call +49-(0) 40-303...