Electrolux EWF1041R9WB - Manuals

7 Detergent/Softener Dispenser Cabinet Front Panel Door Drain Pump Filter Level Adjustment Feet (Front) Level Adjustment Feet (Back) Water Inlet Hose Transit Bolts & Hose Support Transit Bolts & Hose Support Mains Cable Water Drain Hose Worktop Control Panel Transit Bolts 2.1 Parts 2. PRODUC...

9 ENGLISH 9 This machine has “Load Sensing Device” which shows how much load you put in the machine and maximum load recommended for selected wash program. The weight shown on display is an approximate weight only.For correct operation of the load sensor, activate the appliance and set a wash progra...

10 www.electrolux.com 2.4 The Autodose Technology (Autodosing) Introduction Using the right amount of detergent and fabric softener not only improves the wash performance of your machine it is also beneficial for your clothes and environment by avoiding excessive detergent usage.This appliance is eq...

11 3. CONTROL PANEL 3.1 Control Panel Description 2s 2s A B C D E P Q F G H I J K L M N O A Program knob J Temp touchpad B SensorWash touchapd K Display C On/Off button L Autodose - Softener D Stain touchpad M Autodose - Detergent E Hygienic Care touchpad N Pause to add Clothes option F Prewash touc...

13 Program; Temperature range – – Type of load and soil level Max. Spin Speed Max. Load (Dry Clothes) Favourite Recall your favourite program. Woolmark Apparel Care - Blue The wool wash cycle of this machine has been approved by The Woolmark Company for the washing of wool garments labelled as “hand...

15 Delay End ( ) Touchpad Before you start the program, this option makes it possible to define the end of the washing program from minimum of 1 hour to maximum of 20 hours. If program duration is longer than 3 hours, minimum Delay End option starts from 4 hours. After selecting Delay End time, pres...

16 www.electrolux.com Stain Touchpad Press this touchpad to add the stain phase to a program. The indicator of this option comes on. Use this function for laundry with hard to remove stains. You have 2 choices for adding stain remover: Detergent for Prewash phase. Select this option if you wish your...

17 3.5 Settings Child Safety Lock ( ) Option Program settings that are frequently used can be saved (e.g. Cotton, 60°C, 1200 rpm, with Prewash and Hygienic Care). To program/re-program Favourite with your own selections and save them, proceed as follows: • At the end of the Vapour cycle, the clothes...

18 www.electrolux.com This touchpad has 2 functions: Start/Pause ( ) 1. To interrupt a program which is running, press this touchpad to pause the machine, the Start/Pause pilot light flashes. After you have selected the desired program and options, press this touchpad to start the machine. If you ha...

19 Press the On/Off button to turn on the washing machine. Turn the knob to set a program. The washing machine will propose a temperature and automatically select the spin value provided for the program you have chosen. Check and remove objects (if there are any) that could be trapped in the fold. 1...

20 www.electrolux.com When using liquid detergent (Manual compartment), make sure that the special container for liquid detergent is inserted. Refer to the “Manual filling the detergent and additives” paragraph in this chapter. Maximum level for detergent/ additives quantity. (*) By factory default,...

21 Please read “Detergents Type And Quantity Of Detergent” on page 29.We recommend that you do not exceed the maximum indicated level ( ). Filling the detergent and additives on AutoDose system 1. Open the detergent dispenser. 2. Lift up the AutoDose cover lid. 3. Gently pour only liquid detergent i...

22 www.electrolux.com Press AutoDose softener touchpad to toggle on and off, the relevant symbols will show on display if enabled. To Activate/Deactivate AutoDose Softener ( ) Enter the AutoDose configuration mode before proceeding with any program setting. The configuration mode may cancel temporar...

23 Manual filling the detergent and additives You may need to use a different detergent or fabric softener than the ones used in the AutoDose tanks. First, make sure that the AutoDose tanks are disabled and then pour the detergent, fabric softener or other treatments in the manual compartments. 1. O...

24 www.electrolux.com AutoDose Softener ( ) touchpad is disabled in this mode, the display will show “- - - ” when touched it. In Dual-Detergent Mode, you can select which of the 2 different detergents that are stored in the AutoDose compartments to be activated (For example, you can store compartme...

25 1. If you want your laundry to be spun or use temperature different from the one proposed by the washing machine, press “Spin” and “Temp” touchpads repeatedly to change the spin speed and temperature. Press the option touchpads, if you want your laundry to be washed with special functions. 2. If ...

26 www.electrolux.com The appliance will automatically adjust the selected program duration according to the type and size of the load. − The display will show adjusted program duration. − To start a program, press the Start/Pause touchpad. The corresponding pilot light will stop flashing and a defa...

27 When the program is completed and the door lock indicator “ ” goes off, you can open the door. The drum turns regularly to prevent the creases in the laundry. You must drain the water to open the door. The indicator “Start/Pause” flashes to remind you to drain the water. − − − At the end of the p...

28 www.electrolux.com Follow the wash code symbols on each garment label and the manufacturer’s washing instructions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens. 90°C Temp Soil level 60°C 50°C 40°C 30°C Cold For normally soiled, colourfast garments (e.g. shirts, ...

30 www.electrolux.com the washload to turn grey, greasy clothes. inadequate rinsing. reduced washing effect, you are washing a small load, large amounts of foam during washing. the laundry is lightly soiled, Use less detergent if: These symbols appear on fabric labels, in order to help you choose th...

31 You must DISCONNECT the appliance from the electricity supply, before you can carry out any cleaning or maintenance work. The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine. Clean the appliance only with soap and warm water. Full...

33 If some residues remain on the back area of tanks, soak detergent drawer in a warm water. Do not use tools to clean it. Before soaking, remove the handle by pressing the button and slide the handle as indicated in the picture. WARNING! 9. Make sure that all detergent residue is removed from the u...

34 www.electrolux.com ● ● Disconnect the mains plug from the mains socket. WARNING! Do not remove the filter while the appliance is operating. Do not clean the drain pump if the water in the appliance is hot. The water must be cold before you clean the drain pump. To clean the drain pump: 1. Open th...

35 5. Remove fluff and objects from the pump (if there are any). 6. Make sure that the impeller of the pump can turn. If this does not occur, contact the service centre. 7. Clean the filter under the water tap. 8. Put the filter back into the housing with exposed section facing up. Make sure that yo...

37 8.8 Frost Precautions If the appliance is installed in an area where the temperature can be less than 0 °C, remove the remaining water from the inlet hose and the drain pump. Emergency Drain 1. Disconnect the main plug from the main socket. Turn off the water tap. 2. Remove the water inlet hose.3...

38 www.electrolux.com Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Centre, please check troubleshooting. Once the problem has been eliminated, press the Start/Pause button to res...

39 Malfunction Alarm Code Possible cause Solution There is water on the floor: Water leaks from inlet hose fittings. Check the water inlet hose connection. The drain hose is damaged. Call Service. Too much detergent or unsuitable detergent (creates too much foam). Water leaks inside the machine. Dis...

41 In case of power failure or appliance failure, the appliance door remains locked. The wash program continues when power is restored. If the door remains locked in case of failure, it is possible to open it using the emergency unlock feature. Before opening the door: Make sure that the water tempe...

45 Loosen or tighten the feet to adjust the level. A correct adjustment of the appliance level prevents vibration, noise and the movement of the appliance when in operation. Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor. Install the ...

46 www.electrolux.com Fitting Hose Guide bend hose 2. Adjust length to suit trough. Pull apart to insert hose. pull hose 1. 450 approx . Hose Guide Push the drain hose onto the spigot and secure with a clamp, ensure a loop is formed in the drain hose to prevent waste from the sink entering the appli...

47 The materials marked with the symbol are recyclable. >PE<=polyethylene >PS<=polystyrene >PP<=polypropyleneThis means that they can be recycled by disposing them properly in appropriate collection containers. To save water, energy and to help protect the environment, we recommend...

49 13.2 Remote Start If you switch the machine off and on again, the wireless connection is automatically off. When the App is installed and the wireless connection is complete, you can start and stop a program remotely by activate remote start. Press the Remote touch button. The icon is off and the...