Electro-Voice Premium Surface Mount Speakers - Manuals

Page 4 - Mounting Questions

EVID Design and Installation Manual Page 4 Mounting Questions I need to position some of the speakers in my installation on a shelf. How do I do this? The EVID 3.2 and 4.2 full range models have accessory stands available which allow them to mount vertically or horizontally on a shelf or other flat ...

Page 5 - System Design Questions; Can I paint the EVID speakers to match the environment?

EVID Design and Installation Manual Page 5 System Design Questions Can I paint the EVID speakers to match the environment? Yes, the EVID 3.2, 4.2 & 6.2 are made of high impact ABS that accepts a wide variety of paints. For best results, follow the painting directions on page 10 of the Owner’s Ma...

Page 6 - How large an area can an EVID system cover?

EVID Design and Installation Manual Page 6 What general guidelines do I consider when deciding on the physical placement of the EVID 12.1 subwoofer? It is often desirable to place the subwoofer in the middle of the room to get the most uniform coverage. Even though a subwoofer projects sound omni di...

Page 7 - Specification Questions; Can the EVID models be use outdoors?

EVID Design and Installation Manual Page 7 In mono systems (with the inputs of the subwoofer paralleled), the amp views the loads hooked up to the Left and Right satellite outputs as being in parallel with each other. Make sure the amplifier can run loads of less than 4 ohms in this situation. What ...

Page 8 - Salt Spray

EVID Design and Installation Manual Page 8 conducted; Humidity, Low Temperature Cycle, High Temperature Cycle, UV Exposure, and Salt Spray. Salt Spray 48 hours continuous light spray consisting of 5% salt solution. This tests for resistance to the effects of an "aqueous salt atmosphere". It ...

Page 9 - Do the EVID “t” models work with both 70v and 100v systems?

EVID Design and Installation Manual Page 9 infrastructure of the audio system is a constant voltage design you would employ the “t” versions. Do the EVID “t” models work with both 70v and 100v systems? Yes, the same “t” models work on both 100v and 70.7v lines. Regardless whether you use 100v or 70....

Page 10 - EVID System Design Examples

EVID Design and Installation Manual Page 10 EVID System Design Examples What are some typical systems designs incorporating EVID series speakers? The EVID series of surface mount speaker systems are especially well suited to working with the MA/MR mixer amps or the CPS-1, CPS-2 and CPS2T power ampli...

Page 11 - Small Bar or Restaurant

EVID Design and Installation Manual Page 11 Small Bar or Restaurant Room size: 2500 Sq Ft. Source: Mid level music Equipment List Item Quantity Model Speakers Main – Full Range 4 EVID 4.2 Subwoofer 1 EVID 12.1 Amplification Power Amplifier 1 CPS-1 Doctors Office Room size: 300 Sq Ft. Source: Low lev...

Page 12 - Theatre Lobby

EVID Design and Installation Manual Page 12 Theatre Lobby Room size: 3000 Sq Ft. Source: Low level music & voice paging Equipment List Item Quantity Model Speakers Main – Full Range 10 EVID 3.2t Subwoofer N/A Amplification Mixer/Amplifier 1 MA605B Sports Bar Room size: 4000 Sq Ft. Source: High l...

Page 13 - Stadium

EVID Design and Installation Manual Page 13 Stadium Total area: 100000 Sq Ft. Source: Announcement fill and voice paging Total amplifier power: 580 watts per channel The 6.2t’s are tapped at the 30w setting Equipment List Item Quantity Model Speakers Main – Full Range 102 EVID 6.2t Subwoofer N/A Amp...