Page 2 - FLOW CHART
Elation Professional® www.elationlighting.com - DMX Programmer Page 1 1 19 18 17 16 15 14 13 12 11 10 9 8 7 6 54 3 2 • Reversible DMX Polarity Output• 64 DMX Channels • 8 Scanners buttons (up to 8 Channels each)• 4 Programs of 99 steps• 96 Scenes in 24 Pages• Assignable Joystick• Audio Program• Spee...
Page 3 - Notice: Use only a 32 MB Compact Flash Card.
1. FIXTURE BUTTONS - Used to Select any or all of 8 fixtures. 2. SPEED/FADE TIME FADER- Used to adjust the FADE TIME. Fade Time is the amount of time it takes the DMX Programmer to completely change from one scene to another. Used also to adjust the rate of the program speed in Auto Mode. 3. BANK SE...
Page 4 - To ensure proper; Assigning DMX Address:; When longer runs of cable are used, you; DMX ProgrammerTM; Some manufactures use 5-pin XLR connectors
Notice: Be sure to follow figures two and three when making your own cables. Do not use the ground lug on the XLR connector. Do not connect the cable’s shield conductor to the ground lug or allow the shield conductor to come in contact with the XLR’s outer casing. Grounding the shield could cause a s...
Page 5 - Most fixtures start receiving on the address selected; Value; Addressing Fixtures; In order to have individual control of each fixture with the DMX; TYPE 1; DATA IN
Conductor 5-Pin XLR Male (In) 3-Pin XLR Female (Out) Pin 1 Pin 5 - Do Not Use Pin 4 - Do Not Use Pin 3 Pin 2 Pin 1 Pin 3 Pin 2 Not Used Not Used Data True (+ signal) Data Compliment (- signal) Ground/Shield 3-Pin XLR to 5-Pin XLR Conversion DMX Programmer™ DMX Set Up Most fixtures start receiving on...
Page 7 - DMX ProgrammerTM Editing Scenes; If you have already recorded a program in the selected program
Elation Professional® www.elationlighting.com - DMX Programmer Page 12 Elation Professional® www.elationlighting.com - DMX Programmer Page 11 SCENE COPY: This function allows you to copy the settings of one scene to another.1. PRESS AND HOLD the RECORD BUTTON for three (3) seconds to activate record...
Page 8 - RECORD A PROGRAM ON THE FLY:; When using the faders, channels 1-4 can be adjusted when the; DELETE A COMPLETE PROGRAMS:
Elation Professional® www.elationlighting.com - DMX Programmer Page 14 Elation Professional® www.elationlighting.com - DMX Programmer Page 13 RECORD A PROGRAM ON THE FLY: 1. PRESS AND HOLD the RECORD BUTTON for three (3) seconds to activate record mode. A red LED above the button will be lit and the...
Page 10 - SETTTING BLACKOUT DELAY TIME
Elation Professional® www.elationlighting.com - DMX Programmer Page 18 Elation Professional® www.elationlighting.com - DMX Programmer Page 17 There are 7 data folders in the CF Card Menu. All “ALL”, Scenes “SCEN, Program 1 “Pro1”, Program 2 “Pro2”, Program 3 “Pro3, Program 4 “Pro4”, and Set “SEt”.1....
Page 11 - DOWNLOAD SOFTWARE BY RS-232; DATA UPLOAD; DMX ProgrammerTM Dowloading and Uploading
Elation Professional® www.elationlighting.com - DMX Programmer Page 20 Elation Professional® www.elationlighting.com - DMX Programmer Page 19 DOWNLOAD SOFTWARE BY RS-232 To connect to a PC, you will need a serial lap link cable. NOTE: A stan- dard RS-232 cable will not work. This cable is available ...
Page 12 - On the DMX Programmer that you want to Upload data.; DATA DOWNLOAD; On the DMX Programmer that you want to download data from.
the RECORD BUTTON, press the UP BUTTON until the LED WINDOW shows “3:d.Pr”. 4. Press the RECORD BUTTON to access data download, the LED WINDOW will now show “ALL”, one of the seven (7) data folders in the DMX Programmer.5. Select the desired data file you wish to download from your DMX Programmer. 6...
Page 13 - DMX ProgrammerTM Dipswitch DMX Address Chart; Mirrors don’t respond when I move faders; DMX ProgrammerTM Troubleshooting
Elation Professional® www.elationlighting.com - DMX Programmer Page 24 Elation Professional® www.elationlighting.com - DMX Programmer Page 23 WHEN STARTING ADDRESS IS THE ONE SELECTED 1 2 3 5 4 7 9 10 8 6 ON 1 2 3 5 4 7 9 10 8 6 ON 1 2 3 5 4 7 9 10 8 6 ON 1 2 3 5 4 7 9 10 8 6 ON 1 2 3 5 4 7 9 10 8 6...
Page 14 - TWO YEAR LIMITED WARRANTY; DMX ProgrammerTM Warranty
Elation Professional® www.elationlighting.com - DMX Programmer Page 25 TWO YEAR LIMITED WARRANTY A. Elation ® hereby warrants, to the original purprogramr, Elation ® products to be free of manufacturing defects in material and workmanship for a period of 2 Years (730 days) from the date of purprogra...
Page 16 - Specifications; Specifications and improvements in the design; DMX ProgrammerTM Specifications; ©Elation Professional®
Specifications POWER SUPPLY: DC 9-15V, 500mA min. DMX CHANNELS: 64 DMX Channels INPUT/OUTPUTS: DMX Out 3-Pin Neutrik Chassis Connector RS-232 Port DB 9 Connector Fog Machine Connector 5-Pin Din Connector USB Connector for DJ Work Light AUDIO TRIGGER: Built-In Microphone DIMENSIONS: 360mm(L) x 193mm(...