Elation DMX-Branch - Manual
Elation DMX-Branch – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Congratulations and thank you for purchasing the Elation
- Page 3 – Figure 2; Be sure to follow figures two and three when making; Figure 4; XLR Pin Configuration:; Figure 3
- Page 4 – Elation Professional; ©Elation Professional
DMX BOOSTER
1
2
3
4
DMX OUT
D
M
X
O
U
T
D
M
X
IN
1
2
3
4
L
in
k
O
u
t
T
er
m
in
at
e
1 = Ground
2 = Data-
3 = Data+
4 = Not used
5 = Not used
1 = Ground
2 = Data-
3 = Data+
0V
120
Ω
1
2
4
5
3
1
2
3
POWER INPUT: 120V~60Hz
INTERNAL FUSE:
F100mA 250V 5x20mm (5 Pcs)
DMX-BRANCHX4
CAUTION
RISK OF ELECTRICAL SHOCK
DISCONNECT INPUT POWER
BEFORE OPENING
WARNING: THIS APPARATUS MUST BE GROUNDED
User Instructions
Elation Professional
4295 Charter Street
Los Angeles Ca. 90058
www.elationlighting.com
Optional 5-pin
XLRs A
vailable
Introduction:
Thank you for purchasing the Elation DMX-Branch/4.™ To optimize the
performance of this product, please read these operating instructions
carefully to familiarize yourself with the basic operations of this unit.
The Elation
®
DMX-Branch/4™ is DMX signal splitter/booster combina-
tion. This unit has been tested at the factory before being shipped to
you, there is no assembly required.
Customer Support:
Elation
®
provides a customer support line, to provide set up help and
to answer any question should you encounter problems during your
set up or initial operation. You may also visit us on the web at www.
elationlighting.com for any comments or suggestions.
Service Hours are Monday through Friday 10:00 a.m. to 5:00 p.m.
Pacific Time.
Voice:
(323) 582-3322
Fax:
(323) 582-3108
E-mail:
Warning!
To prevent or reduce the risk of electrical shock or fire, do
not expose this unit to rain or moisture.
Caution!
There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures war-
ranty. In the unlikely event your unit may require service please contact
your nearest Elation dealer.
Protect our environment, do not discard this cartoon in the trash. Please
recycle when ever possible.
Introduction
©
Elation Professional
®
www.elationlighting.com DMX-Branch/4™ Instruction Manual Page 2
Rev. 12/04
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
© Elation Professional ® www.elationlighting.com DMX-Branch/4™ Instruction Manual Page 3 • Do not spill water or other liquids in to or on to your unit.• Be sure that the local power outlet match that or the required voltage for your unit.• Do not attempt to operate this unit if the power cord has b...
DMX-Branch/4™ Set Up Unpacking: Every DMX-Branch X4™ has been thoroughly tested and has been shipped in perfect operating order. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your fixture for any damage. I...
DMX-Branch/4™ Operation Be sure the power is disconnected before making any type of connections Connect the output signal from your DMX control-ler to the input jack of the DMX-Branch X4. Use the four output channels to send DMX signal to your DMX fixtures. Dasiy-chain the DMX output. Remember that t...
