Elation 575B - Manuals

Elation 575B – Manual in PDF format online.

Manuals:

Manual

Manual Elation 575B

Summary

Page 3 - CONTENTS

Design Spot 575B™ ©Elation Professional, Los Angeles CA. 3 Design Spot 575B™ CONTENTS 1. General Information……………………………………………………………………… 4 a. Introduction………………………………………………………………………. 4 b. Customer Support…………………………………………….………………… 3 c. Warranty Registration……………………………………………………..……. 5 d. Discharge Lamp...

Page 4 - GENERAL INFORMATION; INTRODUCTION

Design Spot 575B™ ©Elation Professional, Los Angeles CA. 4 Design Spot 575B™ 1. GENERAL INFORMATION INTRODUCTION : Congratulations, you have just purchased one of the most innovative and reliable lighting fixtures on the market today! The Design Spot 575B,™ has been designed to perform reliably for ...

Page 7 - SAFETY INSTRUCTIONS; injuries and/or damage to the fixture.

Design Spot 575B™ ©Elation Professional, Los Angeles CA. 7 Design Spot 575B™ 2. SAFETY INSTRUCTIONS The Design Spot 575B™ is an extremely sophisticated piece of electronic equipment. To guarantee a smooth operation, it is important to follow the guidelines in this manual. The manufacturer of this de...

Page 10 - GENERAL GUIDELINES; This fixture was designed for indoor use only.

Design Spot 575B™ ©Elation Professional, Los Angeles CA. 10 Design Spot 575B™ 4. GENERAL GUIDELINES This fixture is a professional lighting effect designed for use on stage, in nightclubs, in theatres, etc. Do not attempt operation or installation without a proper knowledge on how to do so. This fix...

Page 11 - LAMP INSTALLATION INSTRUCTIONS; Safety Regulations; Disconnect the unit’s main power supply.; Installation Procedure:; “D” found on the back plate of the head assembly.

Design Spot 575B™ ©Elation Professional, Los Angeles CA. 11 Design Spot 575B™ 5. LAMP INSTALLATION INSTRUCTIONS For a proper and safe lamp change, please read this chapter carefully and follow all instructions. Safety Regulations • Disconnect the unit’s main power supply. • Allow the unit to cool fo...

Page 12 - O K; D o not operate thi s devi ce w i th open cov er; Lamp Optimization

Design Spot 575B™ ©Elation Professional, Los Angeles CA. 12 Design Spot 575B™ O K NO 5. Once the lamp has been inserted into the socket, gently slide the socket assembly back into place and secure with the four retaining screws. 6. Reset the lamp run time in the system menu. 7. Always be sure to opt...

Page 14 - MOUNTING AND INSTALLATION; areas were unauthorized personnel might reach the fixture.; B ef ore tak i ng i nto operat i on f or the f i rst ti me,; Mounting

Design Spot 575B™ ©Elation Professional, Los Angeles CA. 14 Design Spot 575B™ 6. MOUNTING AND INSTALLATION Cautions: For added protection mount the fixtures in areas outside walking paths, seating areas, or in areas were unauthorized personnel might reach the fixture. Before mounting the fixture to ...

Page 15 - Mounting points; Be sure a qualified electrician performs all electrical; cord to the appropriate wall outlet.; Clamp Mounting

Design Spot 575B™ ©Elation Professional, Los Angeles CA. 15 Design Spot 575B™ Mounting points Overhead mounting requires extensive experience, including amongst others calculating working load limits, a fine knowledge of the installation material being used, and periodic safety inspection of all ins...

Page 16 - assembly; Securing the Design Spot 575BTM

Design Spot 575B™ ©Elation Professional, Los Angeles CA. 16 Design Spot 575B™ yoke. As an added safety measure be sure to attached at least one properly rated safety cable to the fixture using on of the safety cable rigging point integrated in the bracket assembly Securing the Design Spot 575B™ Rega...

Page 17 - UNDERSTANDING DMX; Your

Design Spot 575B™ ©Elation Professional, Los Angeles CA. 17 Design Spot 575B™ 7. UNDERSTANDING DMX DMX-512: DMX is short for Digital Multiplex. This is a universal protocol used by most lighting and controller manufactures as a form of communication between intelligent fixtures and controllers. DMX ...

Page 24 - “Select program”; section of the control menu. You can set the number of steps under; “Edit program”; . You can edit the individual scenes under; “Edit scenes”; With this function, you can run the internal program via sound.

Design Spot 575B™ ©Elation Professional, Los Angeles CA. 24 Design Spot 575B™ 9 MENU FUNCTIONS: 9.1 Function Mode 9.1.1. DMX address setting This function is used to set or adjust the fixture’s starting DMX address. Every device controlled by DMX has to have a unique starting address. The addressing...

Page 37 - Step 1B – Building Scenes from an External DMX Controller.

Design Spot 575B™ ©Elation Professional, Los Angeles CA. 37 Design Spot 575B™ - “PAN-Fine” – precision pan movement. - “TILT” – tilt movement. - “TILT-Fine” – precision tilt movement - “Move Speed” – adjust pan and tilt motor speed - “Gobo Wheel 1” – select gobos from gobo wheel 1 - “Gobo Rot. 1” – ...

Page 39 - CHANNEL 5: Color Wheel; DMX channel function and values:; Pan Movement; Pan Fine 16bit; Fine control of Pan movement; TILT Movement 8bit :; Tilt Movement; Tilt Fine 16bit; Fine control of Tilt movement

Design Spot 575B™ ©Elation Professional, Los Angeles CA. 39 Design Spot 575B™ 13. DMX CHANNEL TRAITS: The chart below details the channel layout for 15 DMX channels (default). In 8bit mode the “Pan Fine” and “Tilt Fine” channels are not used, thus converting the fixture into a 13-channel DMX fixture...

Page 41 - Fixed gobo indexing Fine

Design Spot 575B™ ©Elation Professional, Los Angeles CA. 41 Design Spot 575B™ 56-69 Gobo 4 70-83 Gobo 5 84-97 Gobo 6 98-111 Gobo 7 112-127 Gobo 1 shake slow to fast 128-143 Gobo 2 shake slow to fast 144-159 Gobo 3 shake slow to fast 160-175 Gobo 4 shake slow to fast 176-191 Gobo 5 shake slow to fast...

Page 42 - Fine Dimmer intensity:

Design Spot 575B™ ©Elation Professional, Los Angeles CA. 42 Design Spot 575B™ 64-95 Strobe effect slow to fast 96-127 No function (shutter open) 128-159 Pulse-effect in sequences 160-191 No function (shutter open) 192-223 Random strobe effect slow to fast 224-255 No function (shutter open) Dimmer in...

Page 43 - FUSE REPLACEMENT; Caution

Design Spot 575B™ ©Elation Professional, Los Angeles CA. 43 Design Spot 575B™ 14. FUSE REPLACEMENT Caution : Always replace with the exact same type fuse, unless otherwise specified by an authorized Elation® service technician. Replacing with anything other than the specified part can damage your un...

Page 46 - Focus Er; Iris Er; default position after the reset.

Design Spot 575B™ ©Elation Professional, Los Angeles CA. 46 Design Spot 575B™ Focus Er (Focus error) This message will appear after the reset of the fixture if the yoke’s magnetic-indexing circuit malfunction (sensor failed or magnet missing) or the stepping-motor is defective (or its driving IC on ...

Page 47 - CLEANING AND MAINTENANCE; The following points have to be considered during the inspection:

Design Spot 575B™ ©Elation Professional, Los Angeles CA. 47 Design Spot 575B™ 16. CLEANING AND MAINTENANCE The following points have to be considered during the inspection: 1. Be sure all screws and fasteners are securely tightened at all times. Lose screws may fall out during normal operation resul...

Page 53 - CIRCUIT SCHEMATIC

Page 54 - TECHNICAL SPECIFICATIONS; dichroic filter plus white, half-color compatible

Design Spot 575B™ ©Elation Professional, Los Angeles CA. 54 Design Spot 575B™ 22. TECHNICAL SPECIFICATIONS Power supply Power consumption 90 ~ 260V, 50 ~ 60 Hz 800 Watt, 4.5 A, Magnetic ballast, (blind current compensated) Fuse protection 120V = 10A/250V, GMA (5x20mm fine-wire fuse) 220V = 5A/250V, ...

Page 56 - Elation Professional

Rev. 11/24/2009 Elation Professional 6122 S. Eastern Ave. Los Angeles, CA. 90040 323-582-3322 / 323-832-9142 fax www.ElationLighting.com / [email protected]