Elation 36 PRO - Manuals - manualsarea.com

Page 3 - TABLE OF CONTENS

DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 2 www.ElationLighting.com TABLE OF CONTENS 1. General Information……………………………………………………………………… 3 a. Introduction………………………………………………………………………. 3 b. Unpacking………………………………………………………..…………..….. 3 c. Customer Support…………………………………………….………………… 3 d. Warr...

Page 4 - GENERAL INFORMATION; INTRODUCTION

DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 3 www.ElationLighting.com 1. GENERAL INFORMATION INTRODUCTION : Congratulations, you have just purchased one of the most innovative and reliable LED fixtures on the market today! The Design LED 36 Pro™ has been designed to perform reliably fo...

Page 5 - yourself. Doing so will void your manufactures warranty.

DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 4 www.ElationLighting.com yourself. Doing so will void your manufactures warranty. Please do not discard the shipping carton in the trash. Please recycle whenever possible. WARRANTY REGISTRATION : The Design LED 36 Pro™ carries a two year (73...

Page 6 - SAFETY INSTRUCTIONS; person in order to prevent possible electrical shock.

DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 5 www.ElationLighting.com 2. SAFETY INSTRUCTIONS To guarantee proper and consistent operation, it is important to follow the guidelines in this manual. Elation Professional will not accept responsibility for damages resulting from the misuse ...

Page 7 - Never open this fixture while in use.

DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 6 www.ElationLighting.com 10. Never open this fixture while in use. 11. This device falls under protection-class I. Therefore it is essential that the device be grounded properly. 12. Qualified personnel should perform all electrical connecti...

Page 8 - rated

DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 7 www.ElationLighting.com 3. FEATURES • Low power consumption • Minimal heat emission • Maintenance free operation • Equipped with 36 3-Watt (12 x red, 12 x green, 12 x blue) • Silent Operation, convection cooled, no fans • 100,000 hours rate...

Page 9 - GENERAL GUIDELINES; installation without a proper knowledge on how to do so.

DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 8 www.ElationLighting.com 4. GENERAL GUIDELINES This fixture is a professional lighting effect designed for use on stage, in nightclubs, in theatres, and other types of architectural installations. Do not attempt operation or installation wit...

Page 10 - FIXTURE OVERVIEW; LED Lens Assembly –; The lens assembly may be user replaced in the event repair

DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 9 www.ElationLighting.com 5. FIXTURE OVERVIEW 1. LED Lens Assembly – The lens assembly may be user replaced in the event repair is needed or a different beam angle is required.

Page 11 - Power Output Lead –

DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 10 www.ElationLighting.com 2. LED Display – 4-segment menu display. Used to display the DMX address as well as all other menu functions. 3. Power Output Lead – This lead is used to jump power to another Design LED 36 Pro™. Please do not daisy...

Page 12 - MOUNTING AND INSTALLATION; minimum point load of 10 times the device’s weight.; qualified staff should attempt installation.; Mounting points; Be sure a qualified electrician performs all electrical; power cord to the appropriate wall outlet.

DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 11 www.ElationLighting.com 6. MOUNTING AND INSTALLATION Cautions: For added protection mount the fixtures in areas outside walking paths, seating areas, and away from areas were unauthorized personnel might reach the fixture. Before mounting ...

Page 13 - Mounting; Clamp Mounting

DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 12 www.ElationLighting.com Mounting The Design LED 36 Pro™ is fully operational in any mounting position, hanging upside-down, side mounted, or set on a flat level surface, etc. Be sure this fixture is kept at least 0.5m (1.5 feet) away from ...

Page 14 - See illustrations below.; Securing the Design LED 36 ProTM; Always be sure to secure your fixture with a safety cable when

DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 13 www.ElationLighting.com added safety measure be sure to attach at least one properly rated safety cable to the fixture. See illustrations below. Securing the Design LED 36 Pro™ Always be sure to secure your fixture with a safety cable when...

Page 15 - UNDERSTANDING DMX; Your

DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 14 www.ElationLighting.com 7. UNDERSTANDING DMX DMX-512: DMX is short for Digital Multiplex. This is a universal protocol used by most lighting and controller manufactures as a form of communication between intelligent fixtures and controller...

Page 16 - shield could cause a short circuit and erratic behavior.

DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 15 www.ElationLighting.com Be sure to follow the above figure when making your own cables. Do not use the ground lug on the XLR connector. Do not connect the cable’s shield conductor to the ground lug or allow the shield conductor to come in ...

Page 17 - to terminate the line. Using a

DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 16 www.ElationLighting.com terminator may avoid erratic behavior in your DMX line. A terminator is a 120 ohm 1/4 watt resistor that is connected between pins 2 and 3 of a male XLR connector (DATA + and DATA -). This fixture is inserted in the...

Page 18 - show

DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 17 www.ElationLighting.com setting the correct DMX address on the digital display located on the back of the fixture. You can set the same starting address for all fixtures or a group of fixtures, or set different address for each individual ...

Page 20 - This function is used to set or adjust the; “VALU” - Display the DMX 512 value of each channel

DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 19 www.ElationLighting.com Note: 1) If the fixture does not receive a DMX signal the menu display will flash repeatedly. 2) SPED: Adjust the hold time for each scene in built-in chase programs. 3) FADE: Adjust the fade time between each scene...

Page 22 - “d ON” –; This; “SEt” – Fixture Personality Settings:; detailed explanation of the different DMX modes.

DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 21 www.ElationLighting.com visualization when the fixture is mounted in an inverted position. “d ON” – The display is designed to turn off during normal operation to avoid excessive light in situations that require an extremely dark environme...

Page 23 - “tIME” – Operating Hours; rentals or show durations.; Select program –; This function allows the user to select one of ten of the user

DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 22 www.ElationLighting.com 8.3 “MANL” – Manual Fixture Settings: This function allows the each of the six DMX channels to be controlled manually. This will allow the fixture to be preset to a specific color or built-in program without the use...

Page 24 - Edit program –; This function allows the user to edit the built-in programs.; Edit Scenes –; This function allows the user to edit or define the actual scenes

DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 23 www.ElationLighting.com 8.5.2 Edit program – This function allows the user to edit the built-in programs. 8.5.3 Edit Scenes – This function allows the user to edit or define the actual scenes that are stored in the user defined built-in pr...

Page 25 - Setting the DMX address -

DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 24 www.ElationLighting.com 9. DMX ADDRESSING Setting the DMX address - After the fixture is turned “ON” it will immediately complete a reset process that test all the fixture’s functions. When the reset process concludes the LCD will display ...

Page 26 - Controller Settings

DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 25 www.ElationLighting.com 6. Press ENTER to confirm. 7. Press MODE/ESC to return to the main menu. Controller Settings : 1. Set the DMX value of channel 1 to a value of 7. 2. Set the DMX value of channel 2 to a value of 7 or 8. When channel ...

Page 27 - Operating Modes

DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 26 www.ElationLighting.com 10. OPERATION Operating Modes : The Design LED 36 Pro™ can operate in six different modes. This next section will detail the differences in the operating modes. • Auto Program Mode (Master) - The fixture will chase ...

Page 29 - DMX compliant controller.

DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 28 www.ElationLighting.com 11. WORKING WITH BUILT-IN PROGRAMS The fixture comes equipped with a built-in DMX recorder that allows custom programs to be installed and recalled directly from the fixture’s control board. Programs can be created ...

Page 30 - Step 1B – Building Scenes from an External DMX Controller

DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 29 www.ElationLighting.com - “Green” – adjust the magenta flag value - “Blue” – adjust the yellow flag value - “Strobe” – adjust the strobe - “Dimmer” – adjust the dimmer intensity - “Scene Time” – set the hold time for the scene - “Input By ...

Page 31 - Step 3 – Playing a Program

DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 30 www.ElationLighting.com • To test the program access “Program Test” in the “Program Edit” menu function. Step 3 – Playing a Program To initiate a program follow the procedure below: • Access the main menu and use the “Up” and “Down” to tog...

Page 32 - DMX Operation Notes:; note that this will override all manual settings.; DMX CHANNEL TRAITS; all the green LEDs, and channels three controls all the blue LEDs.

DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 31 www.ElationLighting.com 12. DMX TRAITS DMX Operation Notes: The fixture will function in DMX mode whenever the unit is receiving a DMX signal. Please note that this will override all manual settings. This unit will keep and retain the last...

Page 33 - the master dimming level.

DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 32 www.ElationLighting.com DMX channel’s functions and their values (3-Channel Mode): Channel 1 - Red: 0-255 Red (0-Black, 255 - 100% Red) Channel 2 - Green: 0-255 Green (0-Black, 255 - 100% Green) Channel 3 - Blue: 0-255 Blue (0-Black, 255 -...

Page 36 - Shutter Closed – LEDs Off; Channel 6 - General dimming / Program Speed Control; this channel will control master dimming.

DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 35 www.ElationLighting.com 161-190 Internal program 6 191-220 Internal program 7 221-255 Gradient Effect Channel 5 - Strobe: 0 Shutter Closed – LEDs Off 1~95 Strobe effect slow to fast 96-127 Shutter Open - LEDs On 128-159 Pulse effect in seq...

Page 37 - LENS REPLACEMENT; to be changed out to achieve different beam angles.

DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 36 www.ElationLighting.com 11. LENS REPLACEMENT The Design LED 36 Pro™ comes with a removable front cover that allows the lens assembly to be changed out to achieve different beam angles. The lens cover is held in place by four 5mm Allen scre...

Page 38 - CLEANING AND MAINTENANCE; sediments. Never remove the ground prong from the power cable.

DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 37 www.ElationLighting.com 12. CLEANING AND MAINTENANCE Consider the following points during normal service and inspection: 1. Be sure all screws and fasteners are securely tightened at all times. Lose screws may fall out during normal operat...

Page 39 - -YEAR LIMITED WARRANTY

DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 38 www.ElationLighting.com 13. 2-YEAR LIMITED WARRANTY A. Elation Professional ® hereby warrants, to the original purchaser, Elation Professional ® products to be free of manufacturing defects in material and workmanship for a period of two y...

Page 41 - PHOTOMETRIC DATA

Page 44 - DIMENSIONAL DRAWINGS

Page 45 - CIRCUIT SCHEMATIC

Page 46 - TECHNICAL SPECIFICATIONS; Power consumption:

DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 45 www.ElationLighting.com 17. TECHNICAL SPECIFICATIONS Power supply: 100v~240v / 50Hz~60Hz AC Power consumption: Maximum 150w LED Configuration: 36 x 3 Watt (12 x Red, 12 x Green 12 x Blue) Weight: 6 Kgs / 15.2Lbs DMX Channels: 6, 4, or 3 Ch...

Page 48 - Elation Professional

Rev. 10/04/2009 – visage Ver. 1.4 Elation Professional 6122 S. Eastern Ave. Los Angeles, CA. 90040 323-582-3322 / 323-832-9142 fax www.ElationLighting.com / [email protected]