Elation 15R - Manuals

Elation 15R – Manual in PDF format online.

Manuals:

Manual

Manual Elation 15R

Summary

Page 2 - Features

2 Thank you for your patronage. We are confident that our excellent products and service can satisfy you. For your own safety, please read this user manual carefully before installing the device.In order to install , operate, and maintain the lighting safety and correctly. We suggest that the instal...

Page 3 - Software-upload by optional accessory via DMX line; Overview; ) Wireless indicator

3 · I ris from 5%~100% with pulse iris effect. · Zoom: 9°~27° linear zoom · Strobe/shutter: High speed shutter, 0-13 Hz or random strobe · Control board with full color LCD graphic display and touch-keyboard · Auto-program: 7 pre-built programs can be selected. · Software-upload by optional accessor...

Page 4 - SAFETY INSTRUCTIONS; The electric connection must carry out by qualified person.

4 SAFETY INSTRUCTIONS This device has left the factory in perfect condition. In order to maintain this condition and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual. Important: Damages caused by the d...

Page 5 - a) Installing or replacing the lamp

5 Please be aware that damages caused by manual modifications to the device are not subject to warranty. Keep away from children and non-professionals. GENERAL GUIDELINES This device is a lighting effect for professional use on stages, in discotheques, theatres, etc., the device was designed for ind...

Page 6 - lamp is underneath. Carefully remove the metal plate.; b) Mounting the device

6 reach very high temperature.During the installation of halogen lamps do not touch the glass bulbs bare handed. Always use a cloth to handle the lamps during insertion and removal.Do not install lamps with a higher wattage. They generate higher temperatures than which the device was designed for.Fo...

Page 7 - Installation via the Omega holders; the middle of the bracket.

7 Overhead mounting requires extensive experience, including amongst others calculatingworking load limits, installation material being used, and periodic safety inspection of allinstallation material and the device. If you lack these qualifications, do not attempt theinstallation yourself. Improper...

Page 8 - DMX-512 control connection; DMX-512 connection with DMX terminator; Address 1 Address 24 Address 47

8 d) Pull the safety-rope through the holes on the bottom of the base and over the trussing system or a safe fixation spot. Insert the end in the carabine and tighten the safety screw. Notice: this step is quite important to ensure that the fixture will not drop out by the damage of the clamp. DMX-5...

Page 9 - Projector DMX start address selection; Operting instructions of the internal DMX wireless system; WDMX in the menu of the fixture:

9 Projector DMX start address selection All fixtures should be given a DMX starting address when using a DMX signal, so that the correct fixture responds to the correct control signals. This digital starting address is the channel number from which the fixture starts to “listen” to the digital contr...

Page 10 - Control Board

10 1)Connect the transmitter with the DMX controller2)To make the fixture installed with wireless receiver log in to the transmittera) Initially, the indicator on the receiver fixture should be in Solid red b) Press and hold the configuration button on transmitter for less than 3 seconds the red/ gr...

Page 16 - “ON”; to enable this function or; “OFF”; automatically shut off.; Status setting; This function allows the DMX address to remotely be

16 When engaged, this function will allow the lamp to be switched “off” via a DMX controller. Select “ON” to enable this function or “OFF” to disable it. Lamp On at Temp. The fixture is designed to shut the lamp off when an excessive temperature is sensed inside the head by the on-board CPU. The lam...

Page 20 - This function readies the fixture for lamp; Calibrate values –; This function should only be performed by a qualified technician.; User mode –; defined modes that are created in the previous function.

20 fixture channel and test it’s function independently from the control board. Lamp adjustment (manual control) – This function readies the fixture for lamp optimization in a simple single step procedure. This function will center the pan and tilt motors and at the same time open the shutter and br...

Page 21 - This function allows the user to edit the built-in programs.; Edit Scenes –; The Platinum Spot 5R features an integrated DMX recorder. Pre-

21 Select program – This function allows the user to select one of ten of the user defined built-in programs. This program is then accessed in “Function Mode” under “Program Run.” Edit program – This function allows the user to edit the built-in programs. Edit Scenes – This function allows the user ...

Page 23 - Rotating gobo index, rotating gobo rotation :; Gobo indexing; Rotating gobo indexing Fine; Fine indexing

23 9 7 13 50-59 Rot. gobo 5 9 7 13 60-69 Rot. gobo 6 9 7 13 70-79 Rot. gobo 7 9 7 13 80-89 Rot. gobo 8 9 7 13 90-104 Rot. gobo 1 shake 9 7 13 105-119 Rot. gobo 2 shake 9 7 13 120-134 Rot. gobo 3 shake 9 7 13 135-149 Rot. gobo 4 shake 9 7 13 150-164 Rot. gobo 5 shake 9 7 13 165-179 Rot. gobo 6 shake ...

Page 25 - Fine Dimmer intensity:

25 16 14 25 0-31 Shutter closed 16 14 25 32-63 No function (shutter open) 16 14 25 64-95 Strobe effect slow to fast 16 14 25 96-127 No function (shutter open) 16 14 25 128-159 Pulse-effect in sequences 16 14 25 160-191 No function (shutter open) 16 14 25 192-223 Random strobe effect slow to fast 16 ...

Page 26 - ERROR MESSAGE

26 22 20 33 112-119 Macro14 22 20 33 120-127 Macro15 22 20 33 128-135 Macro16 22 20 33 136-143 Macro17 22 20 33 144-151 Macro18 22 20 33 152-159 Macro19 22 20 33 160-167 Macro20 22 20 33 168-175 Macro21 22 20 33 176-183 Macro22 22 20 33 184-191 Macro23 22 20 33 192-199 Macro24 22 20 33 200-207 Macro...

Page 28 - CLEANING AND MAINTENANCE; accumulation of dust.; TECHNICAL SPECIFICATIONS; Packing dimensions

28 CLEANING AND MAINTENANCE The following points have to be considered during the inspection: 1) All screws for installing the devices or parts of the device have to be tightly connected and must not be corroded. 2) There must not be any deformations on the housing, color lenses, fixations and insta...