Eiki PjNET-20 - Manuals

7 Network Unit OWNER’S MANUAL ENGLISH Web Management function With this function, you can monitor projector functions such as power status, lampstatus, input mode, signal condition, lamp-use time, etc. through the network by usingthe web browser installed on your computer. E-Mail Alert function The ...

8 Chapter 1 Preparation Multi-control function A single computer can control and set up the multiple computers at the same time. Automatic On/Off using Clock function Automatically turn on or off the projectors at specified date/day and time by using theclock function. Control port ready for externa...

9 Network Unit OWNER’S MANUAL ENGLISH Operating Environment Operating Environment To perform the managing and setting of the projector by using this product, the envi-ronment described below is required. Network Network must handle Ethernet correctly and accept TCP/IP and FTP protocol. Operating Sys...

10 Chapter 1 Preparation The limitation *1 of connection between this product and Hub or Computer Suitable LAN cables are limited by length and type as follows; Connection Type of usable LAN cable Maximum length Network Unit - Hub UTP Straight Cable with category 3 or 5 * 2 100m Network Unit - Compu...

11 Network Unit OWNER’S MANUAL ENGLISH Trademarks Pj-to NetDirector is a trademark of EIKI International, Inc. Ethernet is a registeredtrademark of Xerox Corporation. Microsoft, Windows, Windows NT are registeredtrademarks of Microsoft Corporation. Internet Explorer is a registered trademark ofMicro...

14 Chapter 2 Installation The following are instructions for attaching this product to the projector and connect-ing it to the network. Please review the entire procedure to become familiar with it. Function of the Network Unit ( ☞ p.15) 1 Installation and network configuration ( ☞ p.16-21) 2 Instal...

15 Network Unit OWNER’S MANUAL ENGLISH Name and function of each part z Name and function of each part Serial port This is used when controlling the external equipment via the network. ( ☞ p.85) Power indicator This lights up red when the net- work function is set ON in the projector menu. LAN port ...

16 Chapter 2 Installation x Installation and Network configuration Mounting ✐ The AC cord must be disconnected when mounting or removing this product otherwise itmay damage the product. ✐ Do not connect the AC cord until after connecting the LAN cable and computer. Caution ! 1 Disconnect the AC plug...

17 Network Unit OWNER’S MANUAL ENGLISH Connection of LAN cable Connection of LAN cable To connect to the network, it is required to use the UTP (Unshielded Twisted Pair)strait cable with RJ-45 plug. There are two different types of cables depending onwhether the network is constructed with 10Base-T ...

18 Chapter 2 Installation Network configuration Confirmation of the network menu When installing this product to the projector, the network on-screen menu items forthis product are activated automatically. If not activated, the product may not havebeen installed correctly. Please check item “Mountin...

19 Network Unit OWNER’S MANUAL ENGLISH Network configuration 2 Configuration for IP Address/ Sub net/ Gateway*/DNS* Press SELECT button again, the following network setting menu appears on the screen. Enter the specified network address. How to enter the numbers There are 2 ways to enter the num-ber...

20 Chapter 2 Installation ✐ Password setting must be done when you connect the projector to the network. This settingis carried out through the projector’s menu and also it can be set through the network usingthe web browser. For further information please refer to item “Initial Setting/Password set...

21 Network Unit OWNER’S MANUAL ENGLISH Network configuration How to enter the numbers with the screen 10-key pallet 1. Select a column with a red frame byusing the point buttons 7 8 . 2. Press SELECT button. The screen 10-key pallet appears on the screen. 3. By using the point buttons( d e 7 8 ), se...

22 Chapter 2 Installation c Installing the software It is required to install the software into your computer to use the Network Capturefunction and Network Viewer function. Please install the software as follows. Note:To install the software into the computer with Windows 2000, Windows XP orWindows...

23 Network Unit OWNER’S MANUAL ENGLISH Installed software The following 3 software are installed on your computer. ● Network Capture: Capture the displayed image of the computer and serve it to the projector via thenetwork.This software is registered into “startupfolder” of the computer and the capt...

24 Chapter 2 Installation File Converter 2 Installation 1 S e t t h e s u p p l i e d N e t w o r k V i e w e r &Capture CD-ROM into the CD-ROM driveo f y o u r c o m p u t e r . D o u b l e c l i c k SetupDrv.exe icon in the “Driver” folder in the CD-ROM. 2 Select “English [United States]”from ...

3 25 Network Unit OWNER’S MANUAL ENGLISH Chapter 3 Basic Setting and Operation

26 Chapter 3 Basic Setting and Operation This chapter describes basic operations and settings for controlling the projector via anetwork using this product. It is required that computer and projector be connectedto the network and the network address be properly configured. Login the setting page of...

27 Network Unit OWNER’S MANUAL ENGLISH Login the setting page of the projector 3 Display of main setting page The following main setting page will be displayed according to your display modeselection. Perform the various kinds of setting through this page. Click on themenus to display the control an...

28 Chapter 3 Basic Setting and Operation Returns to the display modeselection page. x Main setting page in the Text Mode display Main menu For selection of controland setting items of thep r o j e c t o r . D i s p l a y s s u b m e n u a n d s t a t u s o fs e l e c t e d i t e m s w h e nclicking ...

29 Network Unit OWNER’S MANUAL ENGLISH Initial Settings Initial Settings After installing this product to the projector, perform the following basic ini-tial setting. Click Initial Setting on the main menu to display the initial setting page. The Languages, Date/Time, Password and Temperature unit c...

30 Chapter 3 Basic Setting and Operation 2 Password Setting This page is to set the password to restrict the access from an unauthorized per-son through the network. Enter the password onto the text box and click Set button. The Network Unit begins restarting and it takes about 40 seconds. Close (Qu...

32 Chapter 3 Basic Setting and Operation Network Configuration Click Network on the main menu. The following setting page is displayed. This page is to set the IP Address, Subnet Mask, Default Gateway, DNS (Domain Name Server) and projector name. 1 Configure the network The IP address and Subnet Mas...

33 Network Unit OWNER’S MANUAL ENGLISH E-mail Setting This product has an E-mail function which can send an alert message tousers or an administrator if it detects an abnormality on the projector or run out of the life span of the lamp. Click E-Mail Setting on the main menu and follow the below step...

34 Chapter 3 Basic Setting and Operation 3 Option selection for sending alert message C l i c k o n t h e O p t i o n l i n k e d t e x t . C h e c k t h e c o n d i t i o nitems under which alert mes-s a g e s w i l l b e s e n t a n d c l i c k Set button. Please refer to item “Examples: T y p e a...

35 Network Unit OWNER’S MANUAL ENGLISH 4 Condition selection for sending alert message Check the condition items under which alert messages will be sent and click Set button.A free message can be sentwhen the lamp use time reach-es the preselected lamp usetime.Check this condition and entera s e t t...

36 Chapter 3 Basic Setting and Operation ● When the internal power circuit is failed: ● When the life span of lamp is reached: ✐ Replace it with a new lamp immediately and reset the lamp counter. If the projectoris used without reset the lamp counter, the alert mail is sent to users in every power-o...

38 Chapter 4 Controlling the Projector ✐ The projector is not turned on for about 90 seconds after switching into the standby mode.After the power status indicator on the control page changes from “On Cooling down” to“OFF”, then try to turn on the projector with On button. ✐ The web browser checks a...

39 Network Unit OWNER’S MANUAL ENGLISH The icons [A], [B] and [C] represent the sensors located in the projector as follows:[A]: Surrounding temperature of the projector*.[B]: Surrounding temperature of the lamp.[C]: Surrounding temperature of the panel.* The indicated peripheral temperature of the ...

40 Chapter 4 Controlling the Projector Control the projector The sub control menu appears on the lower side of the page when clicking Control on the main menu. When you click each control icon, the control page is displayed according to the control menu you selected. The setting methoddiffers depend...

41 Network Unit OWNER’S MANUAL ENGLISH Select a sourcemode with pull-downmenu. Select a input modewith radio buttons. Input This function is to select the input mode and source mode of the projector.Select the input mode with the radio button, and input source mode withthe pull-down menu button. The...

42 Chapter 4 Controlling the Projector PC Adjustment This function is to adjust the signal from the computer connected to theprojector to obtain the proper picture image on the screen. Click on thepage number linked texts to change the setting pages. These parameters will appear only when the RGB(An...

43 Network Unit OWNER’S MANUAL ENGLISH Save a Set 1 Decide your desired PC adjustment val-ues through the PC Adjustment pages“1”to “2”. 2 Display the page “3” and select a modenumber with the pull-down menu buttonof the Save to . Type a memo into the Memo text area for simply description of your sel...

44 Chapter 4 Controlling the Projector System Adjustment This function is to select the color system of video signal or scanning sys-tem of component signal input to the projector. Select a system with theradio buttons to match the color system or scanning system of input source, and then click Set ...

45 Network Unit OWNER’S MANUAL ENGLISH Image Adjustment This function is to adjust the projected picture image and set the imagemode. For selection of image mode, select a desired image mode with the Image pull-down menu button and then click Set button. The setting items are switched automatically ...

46 Chapter 4 Controlling the Projector Save an image adjustment value 1 Decide your desired image adjustmentvalue through the image adjustmentpages “1” to “3”. 2 Display the page “3” and select thedesired image number with the pull-down menu of the Save Adjustment . 3 Register by clicking Set button...

47 Network Unit OWNER’S MANUAL ENGLISH Screen This function is to adjust the screen mode of the projector. The settingitems are switched automatically according to selected input mode, com-puter or video input. Sound This function is to adjust the sound of the projector. The values in the textbox re...

48 Chapter 4 Controlling the Projector Setting This function is to set up the projector. Click on the page number “1” to “6”linked texts to change the setting pages. Item Description Language ..........Changes the on-screen menu language of the projector. Keystone ............Corrects the keystone d...

49 Network Unit OWNER’S MANUAL ENGLISH Item Description Remote Control ......Sets one of 8 types remote control codes. Lamp CounterReset ................Resets the lamp use-time. Reset when replaced lamp. Factory Default ......Sets all of the control items to the factory shipping set. P-TIMER .........

50 Chapter 4 Controlling the Projector Item Description Actual Time ........Displays the current time set to the projector. Timer Setting ....Function to switch on or off the projector at the programmeddate and time. Please see item“How to set the Timer” for fur-ther instructions. How to set the Tim...

51 Network Unit OWNER’S MANUAL ENGLISH 2 Set a time Type the time with (Hour:Minute) and 24 hours format. Ex.: Type [18:25] if you specify [PM 6 o’clock and 25 minutes]. 3 Select an event “ON” or “OFF”. Select an event ON or OFF with the pull-down menu button to turn on or off the projector. 4 Regis...

52 Chapter 4 Controlling the Projector ✐ The timer operates by using the clock function provided in this product. Before setting thetimer, please confirm that the current date and time are set correctly. Timer and clock func-tions are functioning using a lithium battery provided in this product. Whe...

53 Network Unit OWNER’S MANUAL ENGLISH Service This function sets the cooling fan speed of the projector. Set proper fanspeed depending on the installation environment. Select “Normal” or“Maximum” with the pull-down menu button and click Set button. Control the projector

54 Chapter 4 Controlling the Projector Save Actual Adjustment This function is to save and load the control values of the projector. Thestorable control items are Input, PC, System, Image and Screen controls,and these control items differ from each selected input mode and functions of the projector ...

55 Network Unit OWNER’S MANUAL ENGLISH Check the Save items Browse pages by clicking on the page numbers and check each setting status. Thepages for the saving items are constructed by 8 pages. The contents of the pagesmay differ from the actual depending on the selected input mode and the function ...

56 Chapter 4 Controlling the Projector Load a control set Select your desired set number with the pull-down menu button of the Load Setting No. and then click Set button. The setting values of the selected set number are applied to the current settings. Example of setting

57 Network Unit OWNER’S MANUAL ENGLISH Control the projector’s menu Control the projector's menu Click Menu on the main menu. The following menu control page is dis- played. This page is to control the on-screen display menu of the projector. Item Description Display Menu ....To switch the on-screen...

58 Chapter 4 Controlling the Projector Make a memo Select the Memo setting page by clicking Memo on the main menu. The following setting page is displayed. It is convenient to use as a memo for the simple description where the projector is placed in. This note will be displayed onthe login page. The...

60 Chapter 5 Network Viewer & Capture Using the Network Capture function The Network Capture is a function to project the screen images of the computer bythe projector via the network by using the Network Viewer software. Up to 10 com-puters can be registered and the capture images of the comput...

61 Network Unit OWNER’S MANUAL ENGLISH Network Capture [1] Control by the computer * Start capturing from the computer. Select input mode to the “Network” previously. 1 Click Network Capture icon on the task bar. 2 Click “Start” on the popup menu. The captured screen image of the computer will appea...

62 Chapter 5 Network Viewer & Capture [2] Control by the web browser * Start capturing of the PC1 from thePC5. Select input mode to the “Network” previously. 1 Access to the control page on the projector by using the web browser. From themain menu, click Network Capture to display the setting pa...

63 Network Unit OWNER’S MANUAL ENGLISH Registering the computers Up to 10 computers can be registered. Tor e g i s t e r a c o m p u t e r , o n t h e N e t w o r kCapture setting page, click the page num-ber “2” or “3” linked text to change to“Connection Setting” page and enter theIP address of the...

64 Chapter 5 Network Viewer & Capture Advanced using example Displays the presentation data stored in the computer by using the wireless mousefunction from the projector. 1 Start capturing of the computer PC1 by using the projector. Select “Network Capture” icon from the menu and select “PC1” an...

65 Network Unit OWNER’S MANUAL ENGLISH Create the available data [File Converter] The image available with this projector is the JPEG format. There are several types ofJPEG data. Before using the images with the Network Viewer function, it should beconverted to the optimized JPEG data for this proje...

66 Chapter 5 Network Viewer & Capture Converting procedure 1 Select a folder in which the image files are stored by the explorer window. The preview images of the available image data (JPEG file, BMP file) in the select-ed folder are displayed on the preview window. * On the preview window, the ...

67 Network Unit OWNER’S MANUAL ENGLISH Setting of conversion mode When clicking Change button on the confirmation window in the step 3 on the previ- ous page, following option setting window appears. Conversion type: Fit ......................Converts as either width or height of the image sets to b...

68 Chapter 5 Network Viewer & Capture [2] How to use the Network Viewer (File Converter 2) The File Converter 2 is a kind of the printer driver software to convert to the opti-mized JPEG data for the projection from the any documents created by the othersoftware such as text editor, spreadsheet ...

69 Network Unit OWNER’S MANUAL ENGLISH Making a program file [Program Editor] Network Viewer (Program Editor) is a tool to make a program file specify the storedinformation of the JPEG images in the file server (ftp server) and the order of the dis-play images. Program Editor makes a folder “DispPar...

70 Chapter 5 Network Viewer & Capture The setting window disappears and then the programsare listed on the window if there are program files atthe login directory in the connected ftp server. 4 Click New button. 5 Enter a program name and click Add button. 6 The folder selection window appears a...

71 Network Unit OWNER’S MANUAL ENGLISH Use the web browser to access to the control page of the projector. Click Network Viewer on the main menu on the web page, then connect to the file server and select the program name which was made at previous section. The projector starts display-ing the image...

72 Chapter 5 Network Viewer & Capture InternetIntranet PC2 PC4 PC3 PC5 PJ2 PJ1 PC1 JPEG Prog. JPEG Project JPEG images stored in PC3 with PJ2. * ftp file servers Using the Network Viewer function The Network Viewer is a function to acquire and project the JPEG image data on thescreen from the fi...

73 Network Unit OWNER’S MANUAL ENGLISH Network Viewer Select input mode to “Network” previously. 1 Access to the control page on the projector by using the web browser. From the main menu, click Network Viewer to display the setting page. 2 Setup the setting page [1] of the Visual Display. Host name...

74 Chapter 5 Network Viewer & Capture 5 Auto Display setting and control page [3] Auto Control ....Displays period (3 to 240 sec.), Repeating times (1 to 999 times)* 0 times represents endless dis- play The display status is indicated on the text area. Start ..............Starts automatic-image ...

75 Network Unit OWNER’S MANUAL ENGLISH Network Viewer 6 Program New Registration [4] 1. Click on “New Registration” linked text. 2. Enter a program name and click Select button. 3. O n t h e F o l d e r S e l e c t i o n w i n d o w ,click a folder and click Add button. Repeat the above for adding s...

76 Chapter 5 Network Viewer & Capture 7 Program Confirmation & Change [4] 1. C l i c k o n “ C o n f i r m a t i o n & C h a n g e ”linked text. 2. F r o m “ P r o g r a m N a m e ” p u l l - d o w nmenu button, select the program nameyou want to confirm or change. * Click Delete button ...

77 Network Unit OWNER’S MANUAL ENGLISH Network Viewer [2] Control by the projector Select input mode to“Network” previously. 1 Display the menu baron the projected screenby pressing the MENU button on the projectoror the remote controlunit. 2 S e l e c t “ N e t w o r ks e t t i n g ” i c o n b yusi...

80 Chapter 6 Controlling the Multi-Projectors Multi-Control This function enables to control the multiple projectors equipped with theNetwork Units that are connected to the network at the same time. Click Multi Control on the main menu to display the control page. Note: To control the multiple proj...

81 Network Unit OWNER’S MANUAL ENGLISH *1 Normally, the projector in the network is recognized with the IP address. This product allows you to name the projector instead of the IP address. By registering the projector’s nicknamelike “MeetingRoom101”, it can be managed and recognized easily. If you u...

82 Chapter 6 Controlling the Multi-Projectors Exclude/Add/Delete a projector To change the mode of the registered pro-jectors, select a mode with the pull-downmenu button under the IP address of thetarget projector and then click Set button. Status If some of the registered projectors aredeactivated...

83 Network Unit OWNER’S MANUAL ENGLISH Load and apply the setting value The control sets saved for each projector ( ☞ p.54) can be used while the multi-con- trolled projectors function is being used. Select a setting number from the item Load Setting No. with the pull-down menu button and then click...

84 Chapter 6 Controlling the Multi-Projectors Control multi-projectors at the same time The valid controls are shown below. Please refer to item “Control the Projector”( ☞ p.40) for further control and description. When the control button or setting button is clicked, the registered projectors for t...

86 Chapter 7 Use of Serial Port This product provides a serial control port (RS-232C) to control the externalequipment which has an RC-232C port. This function allows external equip-ment to be controlled by the computer through the network and the projec-tor can be controlled by the external serial ...

87 Network Unit OWNER’S MANUAL ENGLISH *1 This product will restart automatically when “Port” or “Serial Control” is changed and it takes about 40 seconds. *2 The reserved port numbers are http (80), ftp (21), telnet (23), etc. The port no. 10000 is reserved to control the projector through the LAN ...

88 Chapter 7 Use of Serial Port Example 2 Controlling a projector which is not on the network function through network. Control Examples Example 1 Controlling AV equipment through network InternetIntranet PC2 PC4 PC3 PC5 PJ2 PJ1 PC1 DVD Player Turn on the DVD playerand start playing. RS-232C serial ...

89 Network Unit OWNER’S MANUAL ENGLISH Control Examples Example 3 Controlling the projector with the serial controller through the serial port (RS-232C). ✐ Use proper serial cable depending on the connected equipment port specification. Pleaserefer to “Port Specification” of the serial port specific...

90 Chapter 7 Use of Serial Port Use of Telnet You can control the equipment connected to the serial port on the network unit andthe projector itself by using the telnet application* 1 installed on your computer. The following is a control example of external equipment. The telnet application is need...

91 Network Unit OWNER’S MANUAL ENGLISH Use of telnet 3 When communication is established, the word “PASSWORD:” appears on thewindow. Type the login password* for the projector and then press “Enter” key onthe keyboard. If you do not register the login password, just press “Enter” key. When the word ...

92 Chapter 7 Use of Serial Port Control the projector with Telnet This product allows you to control the projector by using the Telnet application.Normally, it is used for controlling the external equipment connected to the serial portand also control the projector itself by specifying the telnet po...

Chapter 8 Appendix:A 93 Network Unit OWNER’S MANUAL ENGLISH 8 Connection examples Web browser setting Technical data

94 Chapter 8 Appendix Examples of Connection Peer-To-Peer connection Connecting the projector (PJ01) to the control computer (PC05) directly Projector Name: PJ01 IP Address : 192.168.0.2 Subnet Mask : 255.255.255.0 Default Gateway : 0.0.0.0 DNS : 0.0.0.0 Computer Name: PC10 IP Address : 192.168.0.10...

95 Network Unit OWNER’S MANUAL ENGLISH Examples of connection The gateway (Router) installed in the network Connecting the projector (PJ01) to the control computer (PC05) via the gateway. To another network Network Group: 192.168.200.0 Network Group: 192.168.10.0 Projector Name: PJ01 IP Address : 19...

96 Chapter 8 Appendix Web browser setting This product is designed to enable the projector to be set up and controlled from anInternet web browser. Depending on the preference settings of the web browser,some control functions may not be available. Please make sure that the followingfunctions are se...

97 Network Unit OWNER’S MANUAL ENGLISH Examples: OS/Browsers Windows XP Professional Internet Explorer v.6.0 ActiveScript setting Select the I nternet Options menu from the Tool menu on the web browser and then select Security tab and click Customize Level… button. On the security setting win- dow, ...

98 Chapter 8 Appendix Proxy setting Select the Internet Options menu from the Tool menu on the web browser and then select Connection tab and click LAN Settings button. Properly set up your web browser's the proxy server settings according to the local area network environmentto which the projector ...

Netscape Navigator v.7.0 JavaScript Setting Select the Preference menu from the Edit menu on the web browser and then select the item Advanced/Scripts & Plugins in the Category column. Make sure that the Enable JavaScript for Navigator is checked. 99 Network Unit OWNER’S MANUAL ENGLISH Web brows...

101 Network Unit OWNER’S MANUAL ENGLISH Specifications Product specification Type ......................................Pj-to NetDirector (Network Unit) LAN interface ........................Applicant regulation IEEE802.3 (10Base-T) IEEE802.3u (100Base-TX) Data transfer speed 10Mbps/100Mbps data tra...

102 Chapter 8 Appendix LAN port specification Port Specification Serial port specification pin No. Signal Function 1 TX+ Transfer data (+) 2 TX- Transfer data (-) 3 RD+ Receive data (+) 4 (not used) 5 (not used) 6 RD- Receive data (-) 7 (not used) 8 (not used) 1 2 3 4 5 6 7 8 8-pin modular connector...

Appendix:B FAQ 103 Network Unit OWNER’S MANUAL ENGLISH

104 Chapter 8 Appendix FAQ Why doesn’t the setting page appear in my web browser? F ollowing causes are possible. Please check them. 1. The projector does not connect to the network. Check LED indicators status ( ☞ p.15). - Check the connection of LAN cable if the LINK indicator does not illuminate ...

105 Network Unit OWNER’S MANUAL ENGLISH 3. Enter the projector’s IP address [192.168.0.2] at “Address” column on the Web browser. [Note] Make sure that the proxy setting of your web browseris set “Not use a proxy server” ( ☞ p.96). 4. If the login page appears, this product is operating properly. Th...

106 Chapter 8 Appendix How can I install several projectors equipped with the Network Unit? Install and configure network one by one to avoid the IP address collision eachother ( ☞ p.21). To configure the IP address please see item “Network configuration” ( ☞ p.18). How many projectors can I control...

107 Network Unit OWNER’S MANUAL ENGLISH Why can't I change the controls in the setting page with web browser? Please make sure the projector is turned on. If it is in the standby mode, thesetting is not effective to the projector. To control the projector with a webbrowser, the projector must be in ...

108 Chapter 8 Appendix Why am I not receiving E-mail alert messages? Make sure that the registered E-mail address and SMTP server address are cor-rect. If the SMTP server is located in your LAN (Local Area network), theaddress should be set to the SMTP server in your LAN. The SMTP server locat-ed ou...

109 Network Unit OWNER’S MANUAL ENGLISH Can I update the firmware of the Network Unit. It is possible to update the firmwarethrough the network. It is requiredto have a special tool for the updat-ing. For further information pleaseconsult your local dealer. The ver-sion number of the firmware is ind...

110 Chapter 8 Appendix What are the rules for IP address assignment? If the network is constructed with TCP/IP protocol, a unique IP address isrequired for each piece of network equipment. The following are basic rules ofthe assignment. Rule1 Do not configure the same IP address to the network equip...

111 Network Unit OWNER’S MANUAL ENGLISH Images from the file server don’t appear on the screen? 1. Make sure that the input mode of the projector is “Network”.2. Check the account setting of the file server ( ☞ p.72). 3. The files in the file server must be optimized JPEG files and converted by usin...

112 Chapter 8 Appendix What kind of image formats can I convert? The File Converter 1 enables to convert to the JPEG format from the followingimage format. Bitmap format (.bmp)JPEG format (.jpeg .jpg) A Q File Converter 1 Sometime I have the white frame images converted by the File Converter 2. It m...

Printed in Japan1AA6P1P4299-- IDNC © 2003 Eiki International, Inc. A-key to better communications U.S.A. EIKI International, Inc.30251 EsperanzaRancho Santa MargaritaCA 92688-2132U.S.A.Tel : 800-242-3454 (949)-457-0200 Fax : 800-457-3454 (949)-457-7878E-Mail : [email protected] Canada Deutschland & Ö...