Eiki LC-XT1 - Manuals - manualsarea.com

Page 2 - TO THE OWNER; purchased the projector or the

LC-XT1 2 TO THE OWNER Before operating this projector, read this manual thoroughly and operate the projector properly. This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in better condition for a cons...

Page 3 - SAFETY PRECAUTIONS

LC-XT1 3 SAFETY PRECAUTIONS All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cl...

Page 4 - COMPLIANCES; Federal Communication Commission Notice

LC-XT1 4 COMPLIANCES Federal Communication Commission Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment i...

Page 5 - TABLE OF CONTENTS; FEATURES AND DESIGN; CONNECTING THE PROJECTOR; BEFORE OPERATION; VIDEO MODE

LC-XT1 . TABLE OF CONTENTS FEATURES AND DESIGN 6 PREPARATION 7 NAME OF EACH PART OF THE PROJECTOR 7 SETTING-UP THE PROJECTOR 8 CONNECTING THE AC POWER CORD 8 LENS INSTALLATION 9 POSITIONING THE PROJECTOR 9 LENS SHIFT ADJUSTMENT 9 PICTURE LEVEL AND TILT ADJUSTMENT 10 MOVING THE PROJECTOR 10 CONNECTIN...

Page 6 - • High Resolution Image

LC-XT1 . • Compatibility This projector widely accepts various video and computer input signals including; • Computers IBM-compatible and Macintosh computers up to 1280 x 1024 resolution. • 6 Color Systems NTSC, PAL, SECAM, NTSC 4.43, PAL-M or PAL-N color system can be connected. • Component Video C...

Page 23 - TURNING ON THE PROJECTOR; TURNING OFF THE PROJECTOR

LC-XT1 . TURNING ON THE PROJECTOR 1. Complete the peripheral connections (with Computer, VCR, etc.) before turning on the projector. (Refer to “CONNECTING TO THE PROJECTOR” on Pages 12-15 for connecting that equipment.) 2 Connect the projector’s AC Power Cord into a wall outlet and turn the MAIN ON ...

Page 27 - RGB

LC-XT1 . When connecting to the computer, select a computer signal type (Digital or Analog) in INPUT SOURCE Menu. 1 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select INPUT SOURCE and press the SELECT button. Another dialog box INPUT SOURCE Menu wi...

Page 33 - Some computers may

LC-XT1 . ‘-‘C’’ The AUTO IMAGE function cannot be operated when the input signal is digital from DVI terminal or “RGB”, “480p”, ‘575p”, “HDTV72Op”, “HDTV1O35i” or “HDTV1O8Oi” is selected on the SYSTEM SELECT menu. Press the AUTO IMAGE button on the Side Control or on the Remote Control Unit to autom...

Page 34 - Press the POINT DOWN button and a red-arrow icon will; NOTE; The True and the Digital Zoom cannot be

LC-XT1 . 1 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SCREEN and press the SELECT button. Another dialog box PICTURE SCREEN Menu will appear. 2 Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to the function tha...

Page 35 - Video

LC-XT1 . When connecting to those equipment, select the type of Input source in INPUT SOURCE Menu. 1 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select INPUT SOURCE and press the SELECT button. Another dialog box INPUT SOURCE Menu will appear. 2 Pr...

Page 42 - Turn the projector on first, and then turn on your computer. When the

LC-XT1 . NOTE: When the computer has no mouse port, connect the Serial Port of the computer to Control Port of the projector with the Control Cable for Serial Port The Wireless Remote Control Unit is not only able to operate the projector but also usable as a wireless mouse for most Personal Compute...

Page 44 - Lamp Replace Indicator; Lamp Status Display; Lamp Mode Changeover

LC-XT1 . This Projector is equipped with 4 Projection Lamps to ensure brighter image and those lamps are controlled by Lamp Management Function. Lamp Management Function detects the status of all lamps and shows the status on screen or on the LAMP REPLACE indicator. This function also automatically ...