Eiki LC-XC1 - Manuals - manualsarea.com

Page 2 - • This projector should be set in the way indicated. If not, it

LC-XC1 2 TO THE OWNER Before operating this projector, read this manual thoroughly and operate the projector properly. This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in better condition for a cons...

Page 3 - SAFETY INSTRUCTIONS

LC-XC1 3 SAFETY INSTRUCTIONS All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners, Use a damp c...

Page 4 - COMPLIANCES; Federal Communication Commission Notice; interference at his own expense.; AC POWER CORD REQUIREMENT; AC Power Cord for the United States and Canada:

LC-XC1 4 COMPLIANCES Federal Communication Commission Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment i...

Page 5 - TABLE OF CONTENTS

LC-XC1 5 TABLE OF CONTENTS FEATURES AND DESIGN 6 PREPARATION 7 NAME OF EACH PART OF THE PROJECTOR7 SETTING-UP THE PROJECTOR 8 CONNECTING THE AC POWER CORD 8 POSITIONING THE PROJECTOR 9 ADJUSTABLE FEET 10 MOVING THE PROJECTOR 10 CONNECTING THE PROJECTOR 11 TERMINALS OF THE PROJECTOR 11 CONNECTING TO ...

Page 6 - FEATURES AND DESIGN

LC-XC1 6 ♦ Compatibility This projector widely accepts various video and computer input signals including; • Computers IBM-compatible and Macintosh computers up to 1280 x 1024 resolution. • 6 Color Systems NTSC, PAL, SECAM, NTSC 4.43, PAL-M or PAL- N color system can be connected. • Component Video ...

Page 8 - CONNECTING THE AC POWER CORD; CAUTION; NOTE ON THE POWER CORD; Projector

LC-XC1 8 This projector uses nominal input voltages of 100-120 V or 200-240 V AC. The projector automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any ot...

Page 9 - POSITIONING THE PROJECTOR; LENS SHIFT ADJUSTMENT; • This projector is designed to project on a flat; ROOM LIGHT

LC-XC1 9 POSITIONING THE PROJECTOR LENS SHIFT ADJUSTMENT The projection lens can be moved up and down with the motor-driven lens shift function. This function makes it easy to provide the projected image where you want. The U/D ratio can be adjusted 10 : 0 1: 3 (refer to the figure below.). Refer to...

Page 10 - ADJUSTABLE FEET; LATCHES on both sides of the projector.; MOVING THE PROJECTOR; CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR

LC-XC1 10 ADJUSTABLE FEET Picture tilt and projection angle can be adjusted by rotating the ADJUSTABLE FEET. Projection angle can be adjusted to 9.0 degrees. 1 Lift the front of the projector and pull the FEET LOCK LATCHES on both sides of the projector. 2 Release the FEET LOCK LATCHES to lock the A...

Page 11 - INPUT TERMINALS

LC-XC1 11 This projector has INPUT TERMINALS and OUTPUT TERMINALS on its side for connecting computers and video equipment. Refer to the figure on pages 11 to 14 and connect properly. INPUT TERMINALS

Page 12 - OUTPUT TERMINALS; RESET BUTTON

LC-XC1 12 OUTPUT TERMINALS RESET BUTTON R/C JACK This projector uses a micro processor to control the When using the Wired / Wireless unit. Occasionally, the micro processor may Remote Control Unit as the Wired malfunction and need to be reset. This can be done Remote Control, Connect the Wired by p...

Page 15 - INDICATORS; TOP CONTROL

Page 16 - LASER POINTER FUNCTION; pressed, the laser light goes on. And when the button; Use; hazardous radiation exposure.

LC-XC1 16 LASER POINTER FUNCTION This remote control emits a laser beam as the Laser Pointer from the Laser Light Window, W hen the LASER button is pressed, the laser light goes on. And when the button is pressed more than 1 minute or the button is released, light goes off. Laser light is emitted wi...

Page 18 - OPERATING ON-SCREEN MENU; HOW TO OPERATE ON-SCREEN MENU; Display ON-SCREEN MENU; FLOW OF ON-SCREEN MENU

LC-XC1 18 OPERATING ON-SCREEN MENU HOW TO OPERATE ON-SCREEN MENU You can control and adjust this projector through the ON-SCREEN MENU. Refer to the following pages to operate each adjustment in the ON-SCREEN MENU. Move the pointer (see the NOTE below) by pressing POINT button(s) on the TOP CONTROL o...

Page 19 - MENU BAR; MENU BAR IN COMPUTER MODE

LC-XC1 19 MENU BAR MENU BAR IN COMPUTER MODE Press MENU BUTTON while in Computer mode. MENU BAR IN VIDEO MODE Press MENU BUTTON while in Video Mode .

Page 20 - TURNING; ON THE; PROJECTOR; The Cooling; may work for cooling

LC-XC1 20 TURNING ON THE PROJECTOR 1. Complete the peripheral connections (with Computer, VCR, etc.) before turning on the projector. (Refer to “CONNECTING TO THE PROJECTOR” on Pages 11-~14 for connecting that equipment.) 2 Connect the projector’s AC Power Cord into a wall outlet and turn the MAIN O...

Page 21 - ZOOM; ADJUSTMENT

LC-XC1 21 ZOOM ADJUSTMENT 1 Press the ZOOM ! / " button(s) on the Top Control or on the Remote Control Unit. The message “Zoom” is displayed. 2 . Press the ZOOM ! button or the POINT UP button to make the image larger, and press the ZOOM " button or the POINT DOWN button to make the image sm...

Page 22 - KEYSTONE ADJUSTMENT; Press the KEYSTONE; NO SHOW FUNCTION; PICTURE FREEZE FUNCTION; Press the P-TIMER button on the Remote Control unit. The

LC-XC1 22 KEYSTONE ADJUSTMENT If the picture has keystone distortion, correct image with KEYSTONE adjustment. 1. Press the KEYSTONE ! / " button on the Remote Control Unit or select the Keystone on the SCREEN MENU. (Refer to page 31, 35.) The message “Keystone” is displayed. 2 Correct the Keysto...

Page 24 - CURRENT MODE DISPLAY; SELECT; COMPUTER SYSTEM MANUALLY; AUTOMATIC MULTI-SCAN SYSTEM

LC-XC1 24 DIRECT OPERATION Select COMPUTER mode by pressing the MODE button on the Top Control or the COMPUTER button on the Remote Control Unit. MENU OPERATION 1 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select Computer and press the SELECT butt...

Page 25 - COMPATIBLE COMPUTER SPECIFICATIONS

LC-XC1 25 COMPATIBLE COMPUTER SPECIFICATIONS Basically this projector can accept the signal from all computers with the V, H-Frequency mentioned below and less than 180 MHz of Dot Clock. When the input signal is from the COMPUTER INPUT-i (DIGITAL) terminal, refer to the chart below. NOTE: Specificat...

Page 27 - Clears the parameter

LC-XC1 27 The number of the total vertical lines. Adjust the number to match the image of your personal computer. The number of the total dots in one horizontal period. Adjust the number to match the image of your computer. Adjustment of the horizontal or vertical picture position. When the image is...

Page 29 - NORMAL FUNCTION; The normal picture level is preset on this projector at the; button; appear. Press the POINT LEFT/RIGHT buttons to

LC-XC1 29 NORMAL FUNCTION The normal picture level is preset on this projector at the factory and can be restored anytime you press the NORMAL button (located on the Top Control or on the Remote Control Unit). The “Standard” display will be displayed on the screen for a few seconds. The Auto Image f...

Page 30 - Reset Recalls the; Stores the setting data in

LC-XC1 30 The position of the image can be adjusted vertically and horizontally through PICTURE POSITION ADJUSTMENT. 1 Press the MENU button and the ON-SCREEN MENU appear. Press the POINT LEFT/RIGHT buttons to select POSITION and press the SELECT button. Another dialog I POSITION MENU will appear. 2...

Page 31 - the message “Keystone” is; NOTE; resolution; image

LC-XC1 31 This projector has a picture screen resize function, which enables you to display the desirable image size. 1 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SCREEN ~ and press the SELECT button. Another dialog box SCREEN MENU will app...

Page 32 - DIRECT OPERATION; MENU OPERATION; Video

LC-XC1 32 DIRECT OPERATION Select VIDEO mode by pressing the MODE button on the Top Control or the VIDEO button on the Remote Control Unit. MENU OPERATION Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select Video and press the SELECT button. This pr...

Page 33 - VIDEO SIGNAL FROM VIDEO JACK OR S-VIDEO JACK; NTSC; VIDEO SIGNAL FROM Y,

LC-XC1 33 1 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SYSTEM and press the SELECT button. Another dialog box VIDEO SYSTEM MENU will appear. 2 Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to “Auto”, and then ...

Page 34 - Custom; Color; Noise reduction

LC-XC1 34 1 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select IMAGE and press the SELECT button. Another dialog box IMAGE MENU will appear. 2 Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to the function that you wan...

Page 35 - NOTE: The Regular and the Wide cannot; ADJUSTMENT on page 20.

LC-XC1 35 NORMAL FUNCTION The normal picture level is preset on this projector at the factory and can be restored anytime you press the NORMAL button (located on the Top Control or on the Remote Control Unit). The “Standard” display will be displayed on the screen for a few seconds. This projector h...

Page 36 - Display

LC-XC1 36 1. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SETTING and press the SELECT button. Another dialog box SETTING MENU will appear. 2 Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to the item that you wa...

Page 37 - Split wipe

LC-XC1 37 Ceiling When this function is “On,” the top / bottom and the left / right reversed picture is provided to project the image from a ceiling mounted projector. Rear When this function is “On,” the left / right reversed picture is provided to project the image to a rear projection screen. Spl...

Page 38 - two; CLICK buttons are used for the; INSTALLATION; Used to move the pointer. The pointer; RIGHT CLICK button; Note: When the computer has no

LC-XC1 38 The Wireless Remote Control Unit is not only able to operate the projector but also usable as a wireless mouse for most Personal Computers. The POINT buttons and the two CLICK buttons are used for the wireless mouse operation. The wireless mouse is available only when PC mouse pointer is d...

Page 39 - TEMPERATURE WARNING INDICATOR; Air; CARE AND; AIR FILTER; particles, it will reduce the Cooling Fans’; RECOMMENDATION; cause

LC-XC1 39 TEMPERATURE WARNING INDICATOR WARNING TEMP. Indicator flashes red when the internal temperature of the projector exceeds the normal temperature. The Indicator stops flashing when the temperature of the projector returns to normal. When WARNING TEMP. Indicator continues to flash, check the ...

Page 40 - LAMP REPLACEMENT; Connect the AC Power Cord to the projector and turn the; ORDER REPLACEMENT LAMP; LAMP REPLACEMENT MONITOR TIMER

LC-XC1 40 LAMP REPLACEMENT When the life of the Lamp of this projector draws to an end, the LAMP REPLACEMENT indicator lights yellow. When the image becomes dark or the color of the image becomes unnatural, replacement of the Lamp is required. CAUTION • For continued safety, replace with a lamp asse...

Page 41 - CLEANING; ThE PROJECTION LENS; wipe the cleaning cloth over the lens.

LC-XC1 41 CLEANING ThE PROJECTION LENS Follow these steps to clean the projection lens: 1 Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents or other harsh chemicals might scratch the lens. 2 Lightly wipe th...

Page 42 - No image

LC-XC1 42 Before calling your dealer or service center for assistance, check the matters below once again. 1. Make sure you have connected the projector to your equipment as described in the section “CONNECTING THE PROJECTOR” on pages ii 14. 2. Check cable connection. Verify that all computer, video...

Page 43 - Try these Solution; Make sure you are not too far from the projector when using the; High voltages are used; to operate; this; projector. Do not attempt to open; the

LC-XC1 43 Problem: Try these Solution Remote Control Unit does not work Check the batteries. Check the ALL-OFF switch on the Remote Control Unit is set to “ON.”. Make sure nothing is between the Remote Receiver and the Remote Control Unit. Make sure you are not too far from the projector when using ...

Page 44 - AC Power Cord

LC-XC1 44 Projector Type Multi-media Projector Dimensions (W x H x D) 12.44” x 6.46” x 18.9” (31 6mm x 164mm x 480mm) Net Weight 20.3 lbs (9.2 kg) LCD Panel System 1 3” TFT Active Matrix type, 3 panels Panel Resolution 1024 x 768 dots Number of Pixels 2,359,296 (1024 x 768 x 3 panels) Color System P...

Page 45 - CONFIGURATIONS; OF; THE TERMINALS; CONTROL; MAC; ADAPTER; before you turn-on the prolector and computer.

LC-XC1 45 CONFIGURATIONS OF THE TERMINALS COMPUTER INPUT-1 TERMINAL (ANALOG) Terminal : HDB1 5-PIN Connect the display output terminal of the computer to this terminal with the VGA Cable (supplied). When connecting the Macintosh computer, the MAC Adapter (supplied) is required. CONTROL PORT CONNECTO...

Page 46 - EIKI DEUTSCHLAND GMBH

46 EIKI INTERNATIONAL, INC. 26794 Vista Terrace Drive, Lake Forest, CA. 92630-8113, U.S.A. TEL (949) 457-0200 FAX (949) 457-7878 ElKI CANADA 865 Heritage Drive P.O. Box 156 Midland Ontario L4R 4K8 Canada TEL (705) 527-4084 FAX (705) 527-4087 EIKI DEUTSCHLAND GMBH AM Frauwald 12 65510 Idstein Germany...