Eiki LC-XB33N - Manuals
Eiki LC-XB33N – Manual in PDF format online.
Manuals:
Manual Eiki LC-XB33N
Summary
3 Features and Design This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. ◆ Compact Design Th...
Table of Contents Trademarks Each name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation. Features and Design . . . . . . . . . . . . . . . . . . .3 Table of Contents . . . . . . . . . . . . . . . . . . . . . . To the Owner . . . ....
5 Table of Contents To the Owner CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) . NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT . R E F E R S E R V I C I N G T O Q U A L I F I E D SERVICE PERSONNEL . THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A...
6 Safety Instructions All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth fo...
7 Safety Instructions Safety Instructions Openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. CAUTION Hot air is exhausted from the exhaust vent. When using or installing ...
8 Compliance Federal Communications Commission Notice Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential ...
9 Compliance Part Names and Functions ① ⑤ ⑥ ③ ② Front Back ⑭ ⑦ ⑩ ⑨ ⑧ ⑥ ④ ⑪ ⑬ ⑫ ⑮ ⑯ ⑰ ⑱ ① Infrared Remote Receiver ② Focus Ring ③ Zoom Lever ④ Projection Lens ⑤ Lens Cap (See page 59 for attaching.) ⑥ Air Intake Vent ⑦ Exhaust Vents CAUTION Hot air is exhausted from the exhaust vent. Do not put hea...
10 Part Names and Functions Rear Terminal ⑤ S-VIDEO IN Connect the S-VIDEO output signal from video equipment to this jack (p.19). ⑥ AUDIO IN Connect the audio output signal from video equipment connected to ⑤ or ⑫ to this jack. For a mono audio signal (a single audio jack), connect it to the L (MON...
11 Part Names and Functions Part Names and Functions Top Control ⑤ LAMP REPLACE indicator Lights yellow when the projection lamp reaches its end of life (pp.60,68). ⑩ wARNING TEMP . indicator – Lights red when the projector detects an abnormal condition. – Blinks red when the internal temperature of...
1 Part Names and Functions ㉕ NETwORK button Select the Network input. See owner's manual “Network Set-up and Operation” and owner's manual of Memory viewer. Note: To ensure safe operation, please observe the following precautions:– Do not bend, drop, or expose the remote control to moisture or hea...
13 Part Names and Functions Part Names and Functions Spotlight Pointer Function Pointer Laser Pointer Function LASER button PRESENTATION POINTER button This remote control emits a laser beam from the laser light window. Press the LASER button to activate the laser pointer. The signal emission indica...
16 Positioning the Projector For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the screen. Installation Notes: • The brightness in the room has a great influence on picture quality. It is recommended to limit ambient lighting in order to ...
17 Installation Installation Connecting the AC Power Cord This projector uses nominal input voltages of 100-120 V or 200–240 V AC and it automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of ...
18 Installation Connecting to a Computer Cables used for connection • VGA Cable (Mini D-sub 15 pin) *• DVI-VGA Cable • DVI Cable • USB Cable• Audio Cables(*One cable is supplied; other cables are not supplied with the projector.) Unplug the power cords of both the projector and external equipment fr...
19 Installation Installation Connecting to Video Equipment Cables used for connection • Video and Audio Cable (RCA x 3) • S-VIDEO Cable • Audio Cable (Cables are not supplied with the projector. ) Unplug the power cords of both the projector and external equipment from the AC outlet before connectin...
0 Installation Connecting to Component Video Equipment Cables used for connection • Audio Cables • Scart-VGA Cable • Component Cable • Component-VGA Cable (Cabels are not supplied with this projector.) Notes: • When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available. • ...
1 Installation The preparation display will disappear after 30 seconds. (See page 52 for Lamp control status.) Lamp control status Turning On the Projector Connect the projector’s AC power cord into an AC outlet. The POWER indicator lights red. Open the Lens cap (see pages 9,59). Press the POWER ON/...
Menu Bar PC System Menu Image Adjust Menu Used to adjust computer image [Contrast/Brightness/ Color temp./White balance (R/G/B)/Sharpness/Gamma] (pp.36–37). Setting Menu Used to adjust the volume or mute the sound (p.26). Image Select Menu Used to select an image mode among Dynamic, Standard, Real, ...
5 Basic Operation Basic Operation Rotate the Zoom Lever to zoom in and out. Rotate the Focus Ring to adjust the focus of the image. Zoom and Focus Adjustment If a projected picture still has keystone distortion after pressing the AUTO SETUP/CANCEL button on the top control or the AUTO SET/CANCEL but...
6 Sound Adjustment 1 Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the Sound Menu icon. Press the VOLUME+/– buttons on the top control or on the remote control to adjust the volume. The volume dialog box appears on the screen for a few...
7 Basic Operation Basic Operation Remote Control Operation Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu. Press the COMPUTER, VIDEO, or NETWORK button...
8 Basic Operation black out → the captured image → normal → • • • • • Press the NO SHOW button on the remote control to black out the image. To restore to normal, press the NO SHOW button again or press any other button. When a projected image is captured and set as “User” in the Logo selection (see...
9 Basic Operation Choose either Computer 1 (Analog) or Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control.Before using these buttons, correct input source should be selected through Menu operation as described below. Press the MENU button to...
31 Computer Input Computer Input The Auto PC Adjustment function operates to adjust the projector. PC System Menu The PC System Menu icon Selected system is displayed. Systems in this dialog box can be selected. PC System Menu Customized Mode (1–5) set in the PC Adjust Menu (pp.33–34). Computer Syst...
3 Computer Input Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical positions to conform to your computer. Move the red frame pointer to Auto PC Adj. and press the SELECT button. “Please wait...” appears while the Auto PC adjustment is in p...
33 Computer Input Computer Input PC Adjust Menu Manual PC Adjustment Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has fi...
3 Computer Input Vacant Values of “Total dots”, “Horizontal”, “Vertical”, “Display area H”, and “Display area V”. Close this dialog box. To store adjusted data To clear adjusted data This Mode has stored parameters. Move the red frame pointer to the desired item and press the SELECT button. Use the ...
35 Computer Input Computer Input Move the red frame pointer to the desired image mode and press the SELECT button. The selected image mode is check marked. Image Select Menu Normal picture mode preset on the projector. Standard Picture mode with improved halftone for graphics. Real For the image pro...
36 Computer Input Use the Point ◄► buttons to adjust the setting value. Move the red frame pointer to the desired item and then press the SELECT button. Image Adjust Menu Image Adjust Menu icon Selected Image mode Image Adjustment Reset Press the MENU button to display the On-Screen Menu. Use the Po...
37 Computer Input Computer Input Store Exit the Image Adjust Menu. Quit Store icon This projector has the picture screen resize function, which enables you to customize the image size. Screen Menu Screen Size Adjustment Provide the image to fit the screen size. Normal True Provide the image in its o...
38 Computer Input Select Digital zoom +. The On-Screen Menu disappears and “D. zoom +” appears. Press the SELECT button to expand the image size. Use the Point ▲▼◄► buttons to pan the image. The Panning function can work only when the image is larger than the screen size.A projected image can be als...
0 Video Input Choose Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control.Before using these buttons, correct input source should be selected through Menu operation as described below. 1 Computer Input Menu Use the Point ▲▼ buttons to move the...
1 Video Input Video Input Video System Selection Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the AV System Menu icon. 1 AV System Menu (Video or S-Video) AV System Menu (Component) Use the Point ▲▼ buttons to move the red arrow point...
3 Video Input Video Input Image Adjustment Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the Image Adjust Menu icon. 1 Use the Point ▲▼ buttons to move the red frame pointer to the desired item and then press the SELECT button to displ...
5 Video Input Video Input This projector has the picture screen resize function, which enables you to customize the image size. Normal Screen Size Adjustment Screen Menu Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the Screen Menu ico...
6 Language The language used in the On-Screen Menu is available in English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Finnish, Polish, Hungarian, Romanian, Russian, Chinese, Korean, and Japanese. Set the red frame pointer to the item and press the SELECT button. Press the SELECT ...
7 Setting Setting Display Blue back When this function is “On,” a blue image is displayed while the input signal is not detected. Keystone This function is used to store or reset the keystone correction when the AC power cord is unplugged. Use the Point ▲▼ buttons to switch between each option. Stor...
8 Setting Select [Yes] to capture the projected image. Select [Yes] to stop capturing. Capture Logo (Logo and Logo PIN code lock settings) Logo select This function allows you to customize the screen logo with Logo select, capture, and Logo PIN code lock functions. Note: • When “On” is selected in...
9 Setting Logo PIN code lock Setting This function prevents an unauthorized person from changing the screen logo. Off ............ The screen logo can be changed freely from the Logo Menu (p.48). On ............ The screen logo cannot be changed without a Logo PIN code. If you want to change the Log...
50 Setting Ceiling Rear Ceiling When this function is set to “On,” the picture will be top/bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector. Rear When this function is set to “On,” the picture will be left/right reversed. This function is us...
51 Setting Setting Power management Time left before Lamp is off. Power management For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not operated for a certain period. If the input signal is interrup...
53 Setting Setting Key lock Key lock Security (Key lock and PIN code lock) PIN code lock PIN code lock This function locks the top control and remote control buttons to prevent operation by unauthorized persons. ..... Unlocked. ..... Lock the operation of the top control. To unlock, use the remote c...
5 Setting Change the PIN code lock setting Use the Point ◄► buttons to switch between the options. Use the Point ◄► buttons to select Off, On1, or On2 and then move the pointer to “Quit” with the Point ▼ button. Press the SELECT button to close the dialog box. Change the PIN code lock setting Enter ...
55 Setting This function provides the following options in the cooling fans’ operation when the projector is turned off (p.22). L1 ...... Normal operation L2 ...... Slower and lower-sound than the normal operation (L1), but it takes more time to cool the projector down. Fan Setting Choose the runnin...
56 Setting Factory default This function returns all setting values except for the user logo, PIN code lock, Logo PIN code lock, lamp counter, and filter counter to the factory default settings. Exit the Setting Menu. Quit Select Factory default and this box appears. Select [Yes], and the next box a...
57 Setting The Warning Temp. indicator shows the state of the function which protects the projector. Check the state of the Warning Temp. indicator and the POWER indicator to take proper maintenance. wARNING TEMP . indicator The projector is shut down and the warning Temp . indicator is blinking red...
58 Maintenance and Cleaning Turn off the projector, and unplug the AC power cord from the AC outlet. Turn the projector over and remove the air filters by pulling the latches upward. 1 Filter prevents dust from accumulating on the optical elements inside the projector. Should the air filters become ...
59 Maintenance and Cleaning Maintenance and Cleaning Cleaning the Projector Cabinet Cleaning the Projection Lens Unplug the AC power cord before cleaning. Gently wipe the projection lens with a cleaning cloth that contains a small amount of non-abrasive camera lens cleaner, or use a lens cleaning pa...
60 Maintenance and Cleaning When the projection lamp of the projector reaches its end of life, the Lamp replacement icon appears on the screen and LAMP REPLACE indicator lights yellow. Replace the lamp with a new one promptly. The timing when the LAMP REPLACE indicator should light is depending on t...
61 Maintenance and Cleaning Maintenance and Cleaning This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling may result in accidents, injury, or create a fire hazard. ● Lamp life may differ from lamp to lamp and according to the environment of use. Th...
6 Problem: – Solutions No power – Plug the power cord of the projector into the AC outlet. – See if the POWER indicator lights red. – Wait until the POWER indicator stops blinking to turn on the projector again. The projector can be turned on after the POWER indicator turns red. See page 21. – Check...
68 Check the indicators for projector condition. • • • green. • • • red • • • off • • • blinks green. When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the lamp rep...
69 Appendix Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V-, H-Frequency mentioned below and less than 140 MHz of Dot Clock for analog signal and 110 MHz of Dot Clock for digital signal. When selecting these modes, PC adjustment can be...
70 Appendix ON-SCREEN DISPLAy RESOLUTION H-Freq . (KHz) V-Freq . (Hz) D-VGA 640 x 480 31.47 59.94 D-480p 640 x 480 31.47 59.88 D-575p 768 x 575 31.25 50.00 D-SVGA 800 x 600 37.879 60.32 D-WXGA 1 1366 x 768 48.36 60.00 ON-SCREEN DISPLAy RESOLUTION H-Freq . (KHz) V-Freq . (Hz) D-720p 1280 x 720 37.50 ...
7 Appendix Model No. COMPONENT~VGA Cable : AH-98771 SCART~VGA Cable : AH-98881 The parts listed below are optionally available. When ordering those parts, specify the item name and Model No. to the sales dealer. Optional Parts Accessories Owner’s Manual (CD-ROM) Quick Reference Guide AC Power Cord R...
7 Terminal : Mini DIN 8-PIN SERVICE PORT CONNECTOR Vcc - Data + Data Ground 1 3 2 3 4 1 R X D ----- ----- GND RTS/CTS GND GND 1 3 5 6 7 8 COMPUTER IN /COMPONENT IN /MONITOR OUT (ANALOG) Terminal: Analog RGB (Mini D-sub 15 pin) 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Configurations of Terminals Red (R/Cr...
75 Appendix Appendix Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. PIN Code Number Memo Factory default set No: 1 2 3 4* Factory default set No: 4 3 2 1* Put...
Eiki Manuals
-
Eiki 3279A
Manual
-
Eiki LC-XB40
Manual
-
Eiki LC-XIP2000
Manual
-
Eiki LC-X71L
Manual
-
Eiki LC-XGA982U
Manual
-
Eiki EIP-2500
Manual
-
Eiki LC-X3L
Manual
-
Eiki LC-SB20
Manual
-
Eiki AH-45501
Manual
-
Eiki LC-7000
Manual
-
Eiki LC-SM3
Manual
-
Eiki LC-X984
Manual
-
Eiki 8080A
Manual
-
Eiki OHP-4100
Manual
-
Eiki LC-SX6A
Manual
-
Eiki LC-X1000
Manual
-
Eiki LC-XNB5M
Manual
-
Eiki LC-X60
Manual
-
Eiki OHP-4100A
Manual
-
Eiki LC-X7
Manual