Eiki LC-NB2UW - Manuals

Eiki LC-NB2UW – Manual in PDF format online.

Manuals:

Manual

Manual Eiki LC-NB2UW

Summary

Page 2 - SAFETY PRECAUTIONS; INFORMATION TO THE USER

LC-NB2UW 2 SAFETY PRECAUTIONS IMPORTANT: For your protection in the event or loss of this LC Data- Model No: LC-NB2UW Grade projector, please record the Model and Serial Number located on the rear of the unit and retain this information. Refer to these numbers whenever you call Serial No : _________...

Page 3 - IMPORTANT SAFETY INSTRUCTIONS

LC-NB2UW 3 IMPORTANT SAFETY INSTRUCTIONS All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. ...

Page 4 - TABLE OF CONTENTS; respective corporation.

LC-NB2UW 4 TABLE OF CONTENTS FEATURES AND DESIGN 5 PREPARATION 6 NAME OF EACH PART OF THE PROJECTOR 6 SETTING-UP THE PROJECTOR 7 POSITIONING THE PROJECTOR 7 ADJUSTABLE FEET 7 CONNECTING THE AC POWER CORD 8 VENTILATION 8 MOVING THE PROJECTOR 9 CONNECTING THE PROJECTOR 10 TERMINALS OF THE PROJECTOR 10...

Page 5 - by; • Batteries; for Remote Control Unit.; • Dust; FEATURES AND DESIGN

LC-NB2UW 5 • Compatibility This projector is compatible with many different types of personal computers and video devices, including; • IBM-compatible computers, including laptops, up to 1024 x 768 resolution. • Apple Macintosh and PowerBook computers up to 1024 x 768 resolution. • Various video equ...

Page 7 - ADJUSTABLE FEET

LC-NB2UW 7 POSITIONING THE PROJECTOR • This projector is basically designed to project on a flat projection surface. • The projector can be focused from 4.6’(l .4m) 35.4’(l 0.8m). • Refer to the figure below to adjust the screen size. ROOM LIGHT The brightness in the room has a great influence on th...

Page 9 - MOVING THE PROJECTOR

LC-NB2UW 9 MOVING THE PROJECTOR Use the Carry Handle when moving the projector. When moving the projector, replace the lens cover and rotate the feet fully clockwise ( to shorten the feet) to prevent damage to the lens and the cabinet. When this projector is not used for an extended period, replace ...

Page 10 - CONNECTING THE PROJECTOR

LC-NB2UW 10 CONNECTING THE PROJECTOR Terminal : HDB15-PIN Connect the display output terminal of the computer to COMPUTER INPUT terminal of this projector with the VGA Cable (supplied). And connect to the monitor to MONITOR OUTPUT with the monitor cable (not supplied). W hen connecting the Macintosh...

Page 12 - Cables Used For Connections

LC-NB2UW 12 To connect with the computer, refer to the figure below. Cables Used For Connections • VGA CABLE • CONTROL CABLE FOR PS/2 PORT • CONTROL CABLE FOR SERIAL PORT, or ADB PORT * • MAC ADAPTER * • MONITOR CABLE * • PC AUDIO CABLE (stereo) * * These cables are not supplied with this projector.

Page 17 - FLOW OF ON-SCREEN MENU; Select the Item; HOW TO OP RATE ON-SCREEN MENU

LC-NB2UW 17 You can control and adjust this projector through ON- SCREEN MENU. Refer to the following pages to operate the each adjustment on the ON-SCREEN MENU. 1 MOVING THE POINTER Move the pointer (see the NOTE below) by pressing POINT button(S) on the TOP CONTROL or the REMOTE CONTROL. 2 SELECTT...

Page 19 - working, TEMPERATURE WARNING INDICATOR flashes red.

LC-NB2UW 19 TURNING OF THE PROJECTOR 1 Complete the peripheral connections (with Computer, VCR, and etc.) before turning on the projector. (Refer to “CONNECTING TO THE PROJECTOR” on Pages 10-13 for connecting those equipment. 2 Connect the projector’s AC power cord into a wall outlet. The LAMP indic...

Page 21 - SOUND MUTE ADJUSTMENT

LC-NB2UW 21 NO SHOW FUNCTION Press the NO SHOW button on the Remote Control Unit to turn the picture into black image. This function is cancelled when the NO SHOW button is pressed again or any other function button is pressed. PICTURE FREEZE FUNCTION Press the FREEZE button on the Remote Control Un...

Page 22 - CURRENT MODE DISPLAY; No signal; SELECT COMPUTER MODE MANUALLY

LC-NB2UW 22 DIRECT OPERATION Select COMPUTER mode by pressing the MODE button on the Top Control or the COMPUTER button on the Remote Control Unit. MENU OPERATION Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select Computer and press the SELECT butt...

Page 23 - COMPATIBLE COMPUTER SPECIFICATIONS; RESOLUTION; RESOLUTION

LC-NB2UW 23 COMPATIBLE COMPUTER SPECIFICATIONS Basically this projector can accept the signal from all computers with the V, H-Frequency below mentioned and less than 135 MHz of Dot Clock. ON-SCREEN DISPLAY RESOLUTION H-Freq (kHz) V-Freq. (Hz) ON-SCREEN DISPLAY RESOLUTION H-Freq (kHz) V-Freq. (Hz) V...

Page 27 - AUTO IMAGE FUNCTION; Total dots

LC-NB2UW 27 AUTO IMAGE FUNCTION The Auto Image function is provided to automatically adjust Fine sync, Total dots, and Picture Position for most computers. 1 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select AUTO IMAGE and press the SELECT button....

Page 29 - Auto

LC-NB2UW 29 DIRECT OPERATION Select VIDEO mode by pressing the MODE button on the Top Control or the VIDEO button on the Remote Control Unit . MENU OPERATION Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select Video and press the SELECT button. 1 Pr...

Page 30 - NORMAL FUNCTION

LC-NB2UW 30 1 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select IMAGE and press the SELECT button. Another dialog box PICTURE IMAGE ADJUSTMENT Menu will appear. 2 Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to the ...

Page 32 - INSTALLATION; OPERATING WIRELESS MOUSE; POINT button

LC-NB2UW 32 The Wireless Remote Control Unit is not only able to operate the projector but also usable as a wireless mouse for most Personal Computers. The POINT buttons and the two CLICK buttons are used for the wireless mouse operation. The wireless mouse is usable when PC mouse pointer is display...

Page 33 - CAUTION

LC-NB2UW 33 TEMPERATURE WARNING INDICATOR The TEMPERATURE W ARNING Indicator flashes red when the internal temperature of the projector exceeds the normal temperature. The Indicator stops flashing when the temperature of the projector becomes normal. W hen the TEMPERATURE WARNING Indicator continues...

Page 34 - ORDER REPLACEMENT LAMP

LC-NB2UW 34 LAMP REPLACEMENT INDICATOR When the life of the Lamp of this projector draws to an end, the LAMP REPLACEMENT indicator lights yellow. W hen the image becomes dark or the color of the image become unnatural, replacement of the Lamp is required. LAMP REPLACEMENT CAUTION • For continued saf...

Page 35 - Try these Solution

LC-NB2UW 35 Before calling your dealer or service station for assistance, check the matters below once again. 1. Make sure you have connected the projector to your equipment a s described in section “CONNECTING THE PROJECTOR” on pages 10 ‘~ 13. 2. Check cable connection. Verify that all computer, vi...

Page 38 - OPTIONAL PARTS

LC-NB2UW 38 OPTIONAL PARTS The parts listed below are optionally supplied. W hen ordering those parts, give the name and the Type No. of it to the sales dealer. • Control Cable for Serial Port Type No. : POA-MCSRL • Control Cable for ADB Port Type No. : POA-MCMAC • MAC Adapter Type No. : POA-MACAP