Eiki EIP-1600T - Manuals

3 41 Using the Menu Screen Menu Selections (Adjustments) Example: Adjusting “Bright”. • This operation can also be performed by using the buttons on the projector. Press d MENU. • The “Picture” menu screen for the se- lected input mode is displayed. Adjustment buttons( P / R / O / Q ) Example: “Pict...

4 Contents Preparing Introduction How to Read this Owner’s Manual ....... 3Contents ............................................... 4IMPORTANT SAFEGUARDS ............... 6Accessories ........................................ 10Par t Names and Functions ................. 11 Inserting the Batteries ......

5 Reference Appendix Maintenance ....................................... 51Maintenance Indicators ...................... 52Regarding the Lamp ........................... 54 Lamp ..................................................... 54Caution Concerning the Lamp ............ 54Replacing the Lamp .......

6 1. Read Instructions All the safety and operating instructions shouldbe read before the product is operated. 2. Retain Instructions The safety and operating instructions should beretained for future reference. 3. Heed Warnings All warnings on the product and in the operatinginstructions should be ...

9 ■ When turning off the projector, the cooling fanruns to decrease the internal temperature fora while. Unplug the power cord after the cool-ing fan stops. The period the cooling fan runswill vary, depending on the circumstances andthe internal temperature. Caution regarding usage of the projector ...

10 Accessories Remote control Two R-03 batteries (“AAA” size, UM/SUM-4, HP-16 or similar) • Owner’s manual• Quick Guide Optional accessory ■ Lamp unit AH-11201 Supplied accessories Video cable (10 ' (3.0 m)) QCNWGA097WJPZ Lens cap (attached) DIN-D-sub RS-232C adaptor (5 57 / 64 " (15 cm)) QCNWGA...

11 36 41 29 41 30 30 51 30 15 28 28, 52 28, 52 41 52 Top View STANDBY-ONbutton For turning thepower on andputting theprojector intostandby mode. Lamp indicator Temperature warningindicator Adjustment buttons( P / R / O / Q ) For selecting menu items. ENTER button For settingitems selectedor adjusted...

12 Numbers in Z refer to the main pages in this owner’s manual where the topic is explained. Rear View Part Names and Functions (Continued) Remote controlsensor (rear) Rear adjustmentfoot KensingtonSecurity Standardconnector AC socket Connect thesupplied Power cord. Intake vent Exhaust vent 51 28 31...

13 32 41 38 38 29 29 28 41 41 48 46 41 36 38 38 Numbers in Z refer to the main pages in this owner’s manual where the topic is explained. STANDBY button For putting theprojector into thestandby mode. KEYSTONE button For entering theKeystone Correctionmode. RETURN button For returning to theprevious ...

14 • Danger of explosion if battery is incorrectly replaced.Replace only with the same or equivalent type. • Insert the batteries making sure the polarities correctly match the m and n marks inside the battery compartment. • Batteries of different types have different properties, therefore do not mi...

15 Remote control sensor (rear) Remotecontrol signaltransmitters Remote control 23 n (7 m) 30° 30° • The signal from the remote control can be reflected off a screen for easy operation. However, the effective distance of the signal may differ depending on the screen material. When using the remote c...

16 Quick Start This section shows the basic operation (projector connecting with the video equipment).For details, see the page described below for each step. Setup and Projection In this section, connection of the projector and the video equipment is explained using one ex-ample. 3. Remove the lens...

17 Select the “INPUT 4” using the INPUT buttons on the projector or the INPUT 4 button on theremote control. 5. Select the INPUT mode • When pressing the INPUT buttons on the projector, input mode switches in the following order: INPUT1 INPUT2 INPUT3 INPUT4 INPUT5 INPUT6 • Pressing the INPUT buttons...

18 Ceiling-mount Setup ■ It is recommended that you use the optionalEIKI ceiling-mount bracket for this installation.Before mounting the projector, contact yournearest EIKI Authorized Dealer or ServiceCenter to obtain the recommended ceiling-mount bracket (sold separately). ■ Invert the image by set...

19 300" 200" 100" 80"60" 261" × 147" 174" × 98" 87" × 49" 70" × 39" 52" × 29" 29'9 "–34' 5" (9.1 m – 10.5 m) 19'10 "–22'11 " (6.0 m – 7.0 m) 9'11 "–11'6 " (3.0 m – 3.5 m) 7'11 "–9'2 " (2.4 m – 2.8 m) 5'11 ...

20 Setting up the Projector (Continued) Picture (Screen) Size and Projection Distance 300 (762 cm) 270 (686 cm) 250 (635 cm) 200 (508 cm) 150 (381 cm) 100 (254 cm) 80 (203 cm) 70 (178 cm) 60 (152 cm) 40 (102 cm) 261 (664 cm) 235 (598 cm) 218 (553 cm) 174 (443 cm) 131 (332 cm) 87 (221 cm) 70 (177 cm)...

22 Samples of Cables for Connection • For more details of connection and cables, refer to the owner’s manual of the connecting equipment.• You may need other cables or connectors not listed below. Equipment Input Signal Cable Terminal on the projector Audio-visualequipment HDMI video HDMI cable (com...

23 Connecting to Video Equipment Before connecting, ensure that the power cord of the projector is unplugged from the ACoutlet and turn off the devices to be connected. After making all connections, turn on theprojector first and then the other devices. When connecting the component video equipment ...

24 To video output terminal When connecting to equipment with video output terminal (INPUT4) Video cable To INPUT4 terminal DVD, etc. When connecting to equipment with S-video output terminal (INPUT3) To S-video output terminal S-video cable(commercially available) To INPUT3 terminal DVD, etc. Conne...

25 When connecting to equipment with HDMI output teminal (INPUT6) HDMI is a new specialized interface capable of delivering a video and audio signal tothe terminal using just one cable. Since this projector does not support an audio signalby itself, use an amplifier or other audio device.For video c...

26 Connecting to a Computer To RGB output terminal RGB cable(commercially available) When connecting a computer, ensure that it is the last device to be turned on after all theconnections are made. Ensure that you have read the owner’s manuals of the devices to be connected before makingconnections....

27 Controlling the Projector by a Computer When the RS-232C terminal on the projector is connected to a computer with a DIN-D-sub RS-232C adaptor and an RS-232C serial control cable (cross type, commercially available), the com-puter can be used to control the projector and check the status of the p...

28 Turning the Projector On/Off R e m o v e t h e l e n s c a p a n d p r e s s o STANDBY-ON on the projector or b ON on the remote control. • About the Lamp Indicator The lamp indicator illuminates to indicate thestatus of the lamp. Green: The lamp is on. Blinking in green: The lamp is warming upor...

29 On-screen Display (confirmation message) 1 2 Turning the Power off (Puttingthe Projector into Standby Mode) Press o STANDBY-ON on the pro- jector or a STANDBY on the re- mote control, then press that but-ton again while the confirmationmessage is displayed, to put theprojector into standby mode. ...

30 The height of the projector can be ad-justed using the adjustment feet at thefront and rear of the projector.When the screen is above the projec-tor, the projection image can be madehigher by adjusting the projector. 1 2 R e m o v e yo u r h a n d s f r o m t h eHEIGHT ADJUST lever of the pro-jec...

33 Selecting the Type ofCorrection GEOMETRICADJUSTMENT For correcting an image bydesignating the corner of theprojected image.(See page 34 .) H & VKEYSTONE For correcting an image bydesignating the horizontal orvertical axes. (See page 35 .) Press c KEYSTONE on the remote control. • “GEOMETRIC A...

34 Image Projection (Continued) R On-screen display GEOMETRIC ADJUSTMENT Geometric Adjustment Adjust upper left corner GEOMETRIC ADJUSTMENT ADJUSTNEXT RESETEND Blue area Screen Upper Left Upper Right Lower Left Lower Right • To use the “GEOMETRIC ADJUSTMENT”, set RESIZE to “STRETCH”. (See page 36 .)...

35 2 Press c KEYSTONE on the re- mote control repeatedly until “H &V KEYSTONE” is displayed. • When the “GEOMETRIC ADJUSTMENT” mode has been used to adjust the im-age, a confirmation screen displays be-fore the “H & V KEYSTONE” screen, ask-ing if you want to reset the adjustmentsor not. Then...

36 Image Projection (Continued) Resize Mode This function allows you to modify or customize the resize mode to enhance the input image. De-pending on the input signal, you can choose “STRETCH”, “SIDE BAR”, “CINEMA ZOOM” or “DOTBY DOT (Computer input only)” image. Press RESIZE on the projector or j R...

37 : Cutout area on which images cannot be projected. Computer Input Signal STRETCH Output screen image Computer Image type SIDE BAR 1280 K 720 Resolution lower than XGA XGA (1024 K 768) 4:3 aspect ratio 16:9 aspect ratio CINEMA ZOOM DOT BY DOT 4:3 aspect ratio About Copyrights • When using the RESI...

38 Operating with the Remote Control Freezing a Moving Image Press h FREEZE. • The projected image is frozen. Press h FREEZE again to return to the moving image from the cur-rently connected device. 1 2 Shifting the Projected Im-age Vertically (Image Shift) Press P IMAGE SHIFT. • The image moves up....

39 The following shows the items that can be set in the projector.The selectable items vary depending on the selected input, input signals, or adjustmentvalues. Items that cannot be selected will be greyed out. Menu Items “C.M.S.” PAGE 2 “Picture” menu Picture Mode K 7 5 0 0 1 CLR Temp BrilliantColo...

44 Picture Adjustment (“Picture” menu) (Continued) 3 3 3 3 3 Adjusting the ColorTemperature • Values on “CLR Temp” are only for general standard purposes. N o t e Selectable items 5500K6500K7500K8500K9300K10500K Description For lower color temperature forwarmer, reddish incandescent-likeimages. For ...

45 6 6 6 6 6 Reducing Image Noise(DNR) Menu operation n Page 41 Video digital noise reduction (DNR) provides highquality images with minimal dot crawl and crosscolor noise. Selectable items OFF Level 1-3 Description DNR does not function. Sets the DNR level for viewinga clearer picture. Set “DNR” to...

46 3 3 3 3 3 Auto Sync (Auto SyncAdjustment) • Auto Sync adjustment is also performed by pressing f AUTO SYNC on the remote con- trol. • The Auto Sync adjustment may take some time to complete, depending on the image of thecomputer connected to the projector. • When the optimum image cannot be achie...

47 Using the “Options” Menu Image Shift Overscan H Overscan V 0 0 Subtitle 0 0 OSD Display On Options 1 INPUT 1 h 0 Lamp Timer(Life) 100% Video System Auto Signal Type Auto HDMI Setting Standard Background Blue Auto Power Off On 12 3 2 4567890 Menu operation n Page 41 1 1 1 1 1 Adjusting the ImagePo...

48 Menu operation n Page 41 6 6 6 6 6 Signal Type Setting Using the “Options” Menu (Continued) This function allows you to select the input sig-nal type (RGB or Component) for INPUT 5 orINPUT 6. Selectable items Auto RGB Component Description Automatically selects theappropriate input signalbetween ...

49 Options 2 INPUT 1 STANDBY Mode Eco Fan Mode Normal RS-232C 9600 bps PRJ Mode Front All reset Language English 6 5 4 3 2 1 Menu operation n Page 41 Settings on the Options 2 menu Selectable items Front Ceiling + Front Rear Ceiling + Rear Description Normal image (Projected fromthe front of the scr...

50 Using the “Options” Menu (Continued) 2 2 2 2 2 Selecting the TransmissionSpeed (RS-232C) Make sure that both the projector and computerare set for the same baud rate. Selectable items 9600bps 115200bps Description Transmission speed is slow. Transmission speed is rapid. PR 4 4 4 4 4 Fan Mode Sett...

51 Cleaning the lens ■ Use a commercially available blower or lenscleaning paper (for glasses and camera lenses)for cleaning the lens. Do not use any liquid typecleaning agents, as they may wear off thecoating film on the surface of the lens. ■ As the surface of the lens can easily getdamaged, be su...

52 Maintenance Indicators About the lamp indicator ■ When the remaining lamp life becomes 5% or less, (yellow) and “Change The Lamp” will bedisplayed on the screen. When the percentage becomes 0%, it will change to (red), the lamp will automatically turn off and then the projector will automatically...

54 Regarding the Lamp Lamp ■ It is recommended that the lamp (sold separately) be replaced when the remaining lamp life becomes5% or less, or when you notice a significant deterioration in the picture and color quality. The lamp life(percentage) can be checked with the on-screen display. (see page 4...

55 Removing and Installing theLamp Unit • Make sure that you remove the lamp unit by the handle. Do not touch the glass surface ofthe lamp unit or the inside of the projector. • To avoid injury to yourself and damage to the lamp, be sure to carefully follow the stepsbelow. • Do not loosen other scre...

56 Regarding the Lamp (Continued) Remove the lamp unit. • Loosen the securing screws from the lamp unit. Hold the lamp unit by thehandle and pull it in the direction of thearrow. At this time, keep the lamp unithorizontal and do not tilt it. Resetting the Lamp Timer Reset the lamp timer after replac...

57 Connecting Pin Assignments COMPUTER-RGB Input COMPUTER-RGB/COMPONENT INPUT5 Terminal: 15-pin Mini D-sub female connector 1. Video input (red) 2. Video input (green/sync on green) 3. Video input (blue) 4. Not connected 5. Not connected 6. Earth (red) 7. Earth (green/sync on green) 8. Earth (blue) ...

58 RS-232C Specifications and Command Settings Computer control A computer can be used to control the projector by connecting an RS-232C serial control cable(cross type, sold separately) to the projector. (See page 27 for connection.) Communication conditions Set the serial port settings of the comp...

59 DTV • When this projector receives 640 K 350 VESA format VGA signals, “640 K 400” appears on the screen. Computer Computer Compatibility Chart • Multiple signal support Horizontal Frequency: 15-70 kHz,Vertical Frequency: 45-85 Hz,Pixel Clock: 12-85 MHzSync signal: Compatible with TTL level The fo...

60 Troubleshooting Picure does not appear or projector does not start. No picture appears (or picture is dark). Color is faded or poor. Picture is blurred; noise appears. Problem Check • Projector power cord is not plugged into the wall outlet. • Power to the external connected devices is off. • The...

62 Specifications ProjectorEIP-1600TNTSC3.58/NTSC4.43/PAL/PAL-M/PAL-N/PAL-60/SECAM/DTV480 I /DTV480P/ DTV540P/DTV576 I /DTV576P/DTV720P/DTV1035 I /DTV1080 I /DTV1080 I -50 Single Chip Digital Micromirror Device TM (DMD TM ) by Texas Instruments Panel size: 0.65 " , 1chip DMD Drive method: Digita...

63 Dimensions Units: inches (mm) M4 M4 M4 M4 315 77.5 65.5 46.2 80 47 73 75 33.8 109 105 47.5 104 11 280 95 11 EIP-1600T_EN_m 06.1.24, 1:09 PM 63

EIP-1600T OWNER’S MANUAL EIKI INDUSTRIAL CO., LTD. A-Key to better communications U.S.A. EIKI International, Inc.30251 EsperanzaRancho Santa MargaritaCA 92688-2132U.S.A.Tel : 800-242-3454 (949)-457-0200Fax : 800-457-3454 (949)-457-7878E-Mail : [email protected] Deutschland & Österreich EIKI Deutschla...