Edimax VO-4500SK V2.0 - Manuals

2.2 Creating a Skype account Step 1 ： After Skype is installed, the “Create a new Skype account” window appears. In the “New Users -Create a Skype Account” tab, enter the required information in the suggested available fields (Note the Red Asterisk “*” are required to be filled in). Click “Next” onc...

Step 3 ： A “Request Authorization” window appears. Select the following statement (Circled in Red below) then click “OK”. Step 4 ： Click “Finish”. The contact has been added.

2.4 Assign Speed-Dial Number Step 1 ： From the main Skype window, select the Contact tab. Step 2 ： 　 Right-click on a contact name then Select “Assign Speed-Dial”. Step 3 ： In the next window, enter a speed-dial number, then click “OK”.

Step 4 ： The speed-dial number is now assigned to that specific contact. Repeat to assign speed-dial numbers to other contacts.

3. Connecting Hardware / Installing Skype Gateway Box Software 3.1. Skype Gateway Box Connection Figure 1. ADSL Modem 2. Modem Dial-Up 3. Behind Router/NAT 3.2. Connecting the Skype Gateway Box Hardware Step 1 ： Remove the Skype Gateway Box from product package.

Step 2 ： 　 Remove the telephone cable (RJ11) from the package, and connect one end to your existing telephone and the other end to the “Phone” port at the back of the Skype Gateway Box. As well connect your existing telephone line, from the wall, to the “PSTN” port, also located at the back of the S...

3.3. Installing Skype Gateway Box Middleware Step 1 ： Insert the Installation CD into the CD-ROM drive of the computer, upon which the autorun window will appear. (InstallShield will select the appropriate language automatically) Step 2 ： Click “Next” through each of the following steps, then click ...

Step 3 ： Click on the Start button and continue to the Settings section within the Start menu. Click on the Control Panel tab within the Settings submenu. In the Control Panel window find the “Sounds and Audio Devices” icon, and click on it. Step 4 ： Find the Audio tab (within the selections on top ...

4. Using Skype Gateway Box 4.1 Make a Speed-Dial Call 1. Pick up the handset. (Hear the Dial Tone Generated from PSTN) 2. Press the ＊ button to switch to Skype mode. (Hear the Dial Tone Generated from Middleware) 3. Dial your contact's assigned speed-dial number. 4. Press the ＊ button again to start...

5. Middleware Interface 5.1 Voice Mail Messages Select and press “Play” Button to listen to Voice Message. 5.2 Voice Mail Settings

5.3 Telephone Settings When picking up the Phone If checked: Hear Dial Tone from PSTN If uncheck: Hear Dial Tone from Middleware You can set the desired button (* or #) used to switch between PSTN and Skype.

How to Use Call Forward Function: Step1. Check “Activate Automatic Call Forwarding (PC to Phone)”. Step2. Set the “Call Forwarding Ring” (Default: 6 Rings) (This means Middleware will begin forwarding after 6 Rings) Step3. Fill in the “Forwarding Phone number setting” field. (Middleware will forward...

How to use Skype through accepting an incoming PSTN call: Step1. Check “Activate Automatic Call Forwarding (Phone to PC)” Step2. Set the “Call Forwarding Ring” (Default: 6 Rings) Step3. Set the “Call Forwarding Transfer Password” (Default: 0000) How to verify this function: Skype-A Skype-B Step1. Af...

5.4 Recording Function If c hecked: Middleware will record every Skype calls Select Item and press “Play” to listen to the recorded Voice Messages.