Edimax IC-1520POE - Manuals

1 Thank you for purchasing Edimax Internet IP camera! This IP camera is an ideal product for all kinds of video-surveillance purposes, like home/office safety, kid/pet monitoring, and remote video acquire etc. Unlink conventional close-circuit vide camera, you’re not limited to the length of cable! ...

2 1.1. System Requirement System requirement for PC, MAC or Notebook PC to access the Internet Camera are: „ OS System: Windows 98, ME, 2000, XP + SP2, Server 2003 „ CPU: Intel Pentium III 750MHz above or Intel Celeron 1GHz above „ Memory Size: 128MB (256MB recommended) „ VGA Card Resolution: 800 x ...

y Power When the camera is power on and ready for access, the LED will light. y LAN When the Internet Camera is linking to wired network, the LED is lighting. The LED is flashing when video is transmitted or received through wired network. y WLAN ( For IC-1520DPg only ) When the Internet Camera is l...

The Camera features two ports and a Reset button. y Antenna Standard reverse SMA connector where any antennas with reverse SMA connector can connect to the Internet Camera. y Power The Power jack is where you can connect the power adapter. y LAN The LAN jack is where you can connect the Ethernet net...

5 2.2. Installation Procedure 1. Unpack the Internet Camera package and verify that all the items listed in the Chapter 1 are provided. 2. Connect the Internet Camera to your network by attached the network cable from the switch/router to the LAN port of the Internet Camera. 3. Connect the power ada...

2.3. Locate the IP Address Default IP address of this IP camera is 192.168.2.3. If you wish to assign another IP address to this IP camera, you have to log onto the web configuration interface of the camera first. If the left three fields of the IP address of your computer is not 192.168.2.XXX , you...

3. Web Management Interface Make sure the IP camera is correctly powered (Power LED is on), and then launch Internet Explorer and type the IP address of the IP camera in address bar of Internet Explorer. You should be prompted to input the user name and password: Default user name is ‘admin’ (in low...

You should be able to see the image from camera now: Note: If you see one of these messages (or both): OR Your computer may not have the display capability that this IP camera requires, or you don’t have Microsoft DirectX® installed. Please download Microsoft DirectX® from Microsoft’s website ( http...

3. The system will start the installation procedures. Click “Next” to continue installation. 14 4. If you wish to install the software program in an alternate location, click “Change”; otherwise click “Next” to move on to the next step.

5. Click “Install” to start installing the program. 6. The system will install the program automatically. 15

7. Click “Finish” to complete the software installation. 8. If you have Windows Defender (Windows XP) or other 3 rd party firewall software, you may see the following (or similar) message: Please click ‘Unblock’ (or similar option) to let IP camera Utility pass the firewall, or the IP camera utility...

13. The “Camera Viewer” will show the video automatically. Congratulations, you can use the camera through the network to view the video from now on. 20

4.1 Firmware Upgrade Here provides several tools to upgrade the firmware of this IP camera, clear all settings, or switch LED notification off. 21

22 The descriptions of every setting in this menu will be given below: Item Description Upgrade Firmware If you downloaded latest firmware file from our website, you can click this button to start to upload the firmware file to the IP camera, and you’ll be prompted to provide the location of firmwar...

23 R&TTE Compliance Statement This equipment complies with all the requirements of DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL of March 9, 1999 on radio equipment and telecommunication terminal Equipment and the mutual recognition of their conformity (R&TTE) The R&TTE ...