Edimax ES-5224RE+ - Manuals

Page 2 - FCC COMPLIANCE STATEMENT; Increase the separation between the equipment and receiver.

1 FCC COMPLIANCE STATEMENT This equipment has been tested and found to comply with the limits of a Class A computing devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference. This equipment generates, uses and can radiate ...

Page 3 - Content; VLAN; Switch

2 Content 1. Introduction ......................................... 3 2. Features & Specifications ................... 4 3. Package Contents................................. 6 4. Hardware Description ......................... 7 5. Advance Smart Function Setting ..... 9 5.1 Main Manu................

Page 5 - Features; Supports Trunking:Up to 7 trunking groups

4 2. Features & Specifications Features Complies with the IEEE802.3 Ethernet, IEEE802.3u Fast Ethernet (IEEE802.3z, IEEE802.3ab for Gigabit switch) Provides Store-and-Forward architecture and full wire speed filtering and forwarding rates 10/100Mbps Ports support full/half duplex modes and auto-...

Page 6 - Specifications; All ports

5 Specifications Standards: IEEE802.3, IEEE802.3u, IEEE802.3z, IEEE802.3ab, IEEE802.1Q, IEEE802.1p 10/100Mbps Ports: RJ-45 × 24 Expansion Slot Option (Fast Ethernet Switch): ♦ 10/100Mbps UTP connector (RJ-45) ♦ 100M Fiber SC/ST connector (multi/single mode) Expansion Slot Option (Gigabit Ethernet Sw...

Page 7 - Packing list; Check the contents of your package for following parts:

6 3. Package Contents Packing list Check the contents of your package for following parts: One Fast/Gigabit Ethernet Smart Switch One User's manual One Power cord One RS-232 Cable If any of the items are missing or damaged, please contact your local dealer. CONSOLE 24-port Fast Ethernet Smart Switch...

Page 8 - Hardware Description; This section describes the hardware features of this; LED indicators

7 4. Hardware Description This section describes the hardware features of this Fast/Gigabit Ethernet Smart Switch. For easier management and control of the switch, familiarize yourself with its display indicators and ports. All LEDs are located on the front panel of the switch. They serve the purpos...

Page 9 - Operating Environment; This smart switch must be installed and operated within the; Connecting to network devices; Plug the power cable into the internal three-pronged power

8 Operating Environment This smart switch must be installed and operated within the limits of the specified operating temperature and humidity (see previous section on Specifications). Do not place objects on top of the unit or obstruct any vents at the sides of the unit. Do not position the unit ne...

Page 10 - This smart switch provides advance features, which offers; Before using advance Configuration; Connect to PC

9 5. Advance Smart-Function Setting This smart switch provides advance features, which offers you more flexibility in setting up your network. The following section explains how to set up the VLAN, Trunking, Port speed, Full/Half duplex modes and QoS. Before using advance Configuration Connect to PC...

Page 11 - Adjust the settings of the communication port.; Select the using by connect interface such as

10 4. Adjust the settings of the communication port. 4.1 Select the using by connect interface such as COM1,COM2 4.2 Select the Bits per second at “9600” 4.3 Set the flow control value as “None”.

Page 14 - Switch Static Configuration; Trunk Configuration:

13 5.2 Switch Static Configuration There are six items to select: Port Configuration: Configure the port state, auto negotiation, speed/duplex and flow control. Trunk Configuration: Configure the trunk group. VLAN Configuration: Configure the VLAN group. Misc Configuration: Display the firmware vers...

Page 16 - Note

15 Note: If the trunk group exists, you can see it (ex: TRK1, TRK2 etc.) after port 26, and you can configure all of the items as above. Action-> <Quit>: Exit this menu and return to the previous menu. <Edit>: Configure all items. After finished configure, press Ctrl+A to go back acti...

Page 18 - NOTE

17 5.2.3 VLAN Configuration A Virtual LAN (VLAN) is a logical network grouping that limits the broadcast domain. It allows you to isolate network traffic so that only members of the VLAN receive traffic from the same VLAN members. Basically, creating a VLAN from a switch is logically equivalent of r...

Page 20 - : Set the port VLAN ID that will be assigned

19 If the VLAN mode is 802.1Q VLAN, you can set PVID (port VID) in the same menu, too. PVID (Port VID) : Set the port VLAN ID that will be assigned to untagged traffic on a given port. This feature is useful for accommodating devices that you want to participate in the VLAN but that don’t support ta...

Page 24 - Display the firmware version, change user name and password.

23 5.2.4 Misc Configuration Display the firmware version, change user name and password. 5.2.4.1 SW version This menu shows the firmware version. Press ESC key to return to the previous menu.

Page 25 - In this menu, you can change login password.

24 5.2.4.2 Change Username 1. Press <Edit> 2. Type a new username. 3. Press Ctrl+A to go back to actions menu line. 4. Press <Save> to save configure. 5.2.4.3 Change User Password In this menu, you can change login password.

Page 28 - Reboot the switch in software reset.

27 5.3.2 Restart Reboot the switch in software reset.