Edelbrock 72700 - Manuals

2 10. Connect terminal #1 from the toggle switch to an “ignition-switched” +12 volt source. We recommend that you connect this wire to the switched-on power of the vehicle’s nitrous system arming switch. This ensures that the heater can only be activated when the nitrous system is armed. 11. Connect...

3 To Test Bottle Heater for Correct Operation: 1. Turn ignition key to the “run” position. 2. Turn the vehicle’s nitrous system toggle switch to the “on” position. 3. Turn the bottle heater toggle switch to the “on” position. 4. A “click” should be heard from the heater’s relay when first activated ...

4 Caution 1. The bottle heater surface can achieve temperatures in excess of 400 degrees. Do not attempt to handle, adjust, or remove from the bottle while the heater is in operation. 2. Do not touch heater surface while in operation. Severe burns to the skin can result. 3. Do not rest or lie heatin...