Edelbrock 63-0170 - Manuals

Edelbrock 63-0170 – Manual in PDF format online.

Manuals:

Manual Edelbrock 63-0170

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6

Summary

Page 2 - Figure 1 - Fittings and Vacuum Port Location

©2010 Edelbrock LLC Brochure #63-0170 Part #1801-1806,1812, 1813, 1825, 1826Rev. 6/10 - AJ/mc Page 2 of 6 POWER BRAKE PORT (Rear of Carburetor - 1/4” NPT) MUST BE PLUGGED WITH SUPPLIED 1/4” PIPE PLUG IF NOT IN USE IDLE MIXTURE SCREWS Left side screw for left side of carburetor Right side screw for r...

Page 3 - Fuel Filter

6. Do not use more than 6.5 psi fuel pressure. Excessive fuel pressure may cause flooding. If your fuel pressure is too high,install an adjustable pressure regulator such as Edelbrock #8190,or #1727. 7. It may be necessary to re-route the fuel line to prevent interferencewith the air cleaner. Test f...

Page 6 - NEVER POUR FUEL DIRECTLY DOWN THE; Turn only 1 full turn beyond closed position for; Torx

©2010 Edelbrock LLC Brochure #63-0170 Part #1801-1806,1812, 1813, 1825, 1826Rev. 6/10 - AJ/mc Page 6 of 6 Edelbrock LLC • 2700 California St. • Torrance, CA 90503 Tech-Line: 800-416-8628 • Office Line: 310-781-2222 10. Mark air cleaner stud for proper length, remove from carburetor and cut with hack...

Edelbrock Manuals