Edelbrock 33505 - Manuals

Edelbrock 33505 – Manual in PDF format online.

Manuals:

Manual Edelbrock 33505

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7

Summary

Page 2 - A coil spring compressor is required to remove the; seize compound to threaded collars); (a) Adjust all four threaded spring collars

Step 4 Removal of rear shock Step 6 Disassembly of rear coil springs from shock 4(a) Loosen upper and lower nuts. 4(b) In order to remove bolts, they may need a little gentle persuasion with a pry bar. Bolt should come out by hand (see Fig. 3). 4(c) Shock will now come out through the top. Step 5 Di...

Page 3 - Step 8 Assembly of Front shocks; (a) Insert coil spring with flat ground end against

Step 8 Assembly of Front shocks 8(a) Insert coil spring with flat ground end against threaded collar seat . 7(b) Install and tighten allen set screw with 1/8 allen wrench (see Fig. 8). Fig. 8 8(b) Put shock and coil spring in spring compressor (see Fig. 11). Fig. 11 7(c ) Slide threaded collar onto ...

Page 4 - Step 9 Rear IAS shocks; preferred as not to mark up the clevis.

Step 9 Rear IAS shocks IAS shock reuses the O.E.M. large black clevis mount and must be unscrewed from the shock body. 9(a) Mount clevis in vice with soft jaws, aluminum preferred as not to mark up the clevis. Screw jamb nut by hand until it hard stops at end of threads (see Fig. 13). Fig. 13 8(d) A...

Edelbrock Manuals