Edelbrock 330/350/403 - Manuals

© 2001 Edelbrock CorporationBrochure No. 63-0048 Page 1 of 8 Rev 1/02 GENERAL INSTRUCTIONS FOR INTAKE MANIFOLD REMOVAL AND INSTALLATION The following instructions must be carefully studied and understood before you remove your stock manifold. Failure to follow these instructions may void the warrant...

MANIFOLD AND CARBURETOR HEIGHT: 1. Remove the air cleaner.2. Lay a straightedge (such as a yardstick) acrosstop of carburetor fromfront to back. 3. Measure from block and manifold end sealsurface.See Figure 3. 4. Record measurements in blank spaces labeledOM1 and OM2. 5. Measure height of carburetor...

© 2001 Edelbrock CorporationBrochure No. 63-0048 Page 8 of 8 Rev 1/02 Edelbrock replacement manifolds are designed to maintain high vacuum at cruise throttle position and sharp throttle response with minimum throttle opening. Unnecessary demands on the added performance will affect mileage. REFERENC...