Edelbrock 262-400 - Manuals

Edelbrock 262-400 – Manual in PDF format online.

Manuals:

Manual Edelbrock 262-400

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10

Summary

Page 2 - • REAR WATER BOSSES; Should this condition occur, recalibrate with a richer jet.; • CAMSHAFT AND HEADERS; Figure 1—Intake Manifold Tightening Sequence

Figure 3—Remove shaded area to provide clearance for throttle or kick-down bracket Figure 2—262-400 c.i.d. Chevrolet Firing Order— 1-8-4-3-6-5-7-2 Turn Distributor Counter Clockwise to Advance Timing 3. Eliminate the end seals. Use automotive grade RTV silicone instead. Apply a bead of sealant appro...

Page 3 - Improper installation will result in:; Low Mileage

© 2001 Edelbrock CorporationBrochure No. 63-0048 Page 1 of 8 Rev 1/02 GENERAL INSTRUCTIONS FOR INTAKE MANIFOLD REMOVAL AND INSTALLATION The following instructions must be carefully studied and understood before you remove your stock manifold. Failure to follow these instructions may void the warrant...

Page 4 - MANIFOLD AND CARBURETOR HEIGHT:; Measure from block and; CHECKING HOOD CLEARANCE:; CLAY CONE; HEIGHT B; HOOD CLEARANCE

MANIFOLD AND CARBURETOR HEIGHT: 1. Remove the air cleaner.2. Lay a straightedge (such as a yardstick) acrosstop of carburetor fromfront to back. 3. Measure from block and manifold end sealsurface.See Figure 3. 4. Record measurements in blank spaces labeledOM1 and OM2. 5. Measure height of carburetor...

Edelbrock Manuals