Edelbrock 1607 - Manuals

Edelbrock 1607 – Manual in PDF format online.

Manuals:

Manual Edelbrock 1607

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6

Summary

Page 3 - ©2007 Edelbrock Corporation; Remove lower rocker boxes as an assembly then; Cylinder head gasket

©2007 Edelbrock Corporation Brochure #63-1604 3 of 6 Catalog #1604, 1606, 1607, 1624, 16041 & 16061Rev. 3/07 - RS/mc REMOVE ROCKER ARM COVERS 1. Remove bolts (1) and seals (2) (See Figure 1) . Use a shortened 3/16" allen wrench. 2. Remove top (3) and middle (4) sections of rocker box. Remove...

Page 4 - Be sure the gasket surfaces and stud holes are clean and dry; Front cylinder

©2007 Edelbrock Corporation Brochure #63-1604 4 of 6 Catalog #1604, 1606, 1607, 1624, 16041 & 16061Rev. 3/07 - RS/mc CYLINDER HEAD INSTALLATION CAUTION Install new O-rings over the cylinder dowels beforeinstalling the head gasket. Install the O-rings first toensure alignment of the head gasket a...

Page 6 - CAUTION; Edelbrock Corporation • 2700 California St. • Torrance, CA 90503

©2007 Edelbrock Corporation Brochure #63-1604 6 of 6 Catalog #1604, 1606, 1607, 1624, 16041 & 16061Rev. 3/07 - RS/mc 4. Install bolts and washers (11 and 12, 13 and 14). Slowly snug lowerrocker box fasteners in small increment (one at a time) in a crosspattern. This will bleed the lifters. Check...

Edelbrock Manuals