Edelbrock 1400 - Manuals

Edelbrock 1400 – Manual in PDF format online.

Manuals:

Manual Edelbrock 1400

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6

Summary

Page 2 - ©2007 Edelbrock Corporation; INSTALLATION PROCEDURE; CARBURETOR PREPARATION; When disconnecting fuel line, avoid any exposure to; RECOMMENDED TOOLS

©2007 Edelbrock Corporation Brochure #63-0443 Catalog #1400Rev. 1/07 - RS/mc Page 2 of 5 INSTALLATION PROCEDURE Figure 1 - Fittings and Vacuum Port Locations CANISTER VAPOR VENT (#1400 ONLY) IDLE MIXTURE SCREWS Left side screw for left side of carb Right side screw for right side of carb FUEL INLET ...

Page 3 - “Adjustments and Troubleshooting”; section of the; NEVER POUR FUEL DIRECTLY DOWN THE

©2007 Edelbrock Corporation Brochure #63-0443 Catalog #1400Rev. 1/07 - RS/mc Page 3 of 5 IDLE MIXTURE The Edelbrock Performer Series carburetor has conventional Idle MixtureScrews (IMS) that provide a leaner A/F when turned clockwise and richerA/F when turned counter clockwise. The idle air flow is ...

Page 4 - CHOKE ADJUSTMENT; To adjust the choke piston linkage; To adjust the fast idle linkage; Tab; If this happens, they may fall into the; ADJUSTMENT

CHOKE ADJUSTMENT To adjust the choke piston linkage (See Figure 5) , open the choke valve and insert a .026" wire, with a 90-degree bend 1/8" from the end, between thetop of the slot in the choke piston cylinder and the bottom of the slot in thepiston. Hold the wire in position and close the...

Edelbrock Manuals