ECHO SRM-2620AA - Manuals - manualsarea.com

Page 2 - TABLE OF CONTENTS

TABLE OF CONTENTS SRM-2620 2 X7502341701 © 3/2018 ECHO Inc. TABLE OF CONTENTS Table of Contents ........................................................................................ 2Introduction ................................................................................................. 4Se...

Page 4 - INTRODUCTION; For questions regarding terms used in this manual, visit:; SERVICING INFORMATION

INTRODUCTION SRM-2620 4 X7502341701 © 3/2018 ECHO Inc. INTRODUCTION Specifications, descriptions and illustrative material in this literature are as accurate as known at the time of publication, but are subject to change without notice. Illustrations may include optional equipment and accessories, a...

Page 5 - ENGLISH; SAFETY

SRM-2620 SAFETY X7502341701 5 © 3/2018 ECHO Inc. ENGLISH Service Service of this product during the warranty period must be performed by an Authorized ECHO Service Dealer. For the name and address of the Authorized ECHO Service Dealer nearest you, ask your retailer or call: 1-800-432-ECHO (3246). De...

Page 6 - Note: This enclosed message provides tips for use, care and; International Symbols; Symbol

SAFETY SRM-2620 6 X7502341701 © 3/2018 ECHO Inc. The safety alert symbol accompanied by the word “DANGER” calls attention to an act or condition which WILL lead to serious personal injury or death if not avoided. The safety alert symbol accompanied by the word “WARNING” calls attention to an act or ...

Page 8 - Physical Condition; Your judgment and physical dexterity may not be good:

SAFETY SRM-2620 8 X7502341701 © 3/2018 ECHO Inc. Personal Condition and Safety Equipment Cancer and Reproductive Harmwww.P65Warnings.ca.gov The muffler or catalytic muffler and surrounding cover may become extremely hot. Always keep clear of exhaust and muffler area, otherwise serious personal injur...

Page 9 - Eye Protection

SRM-2620 SAFETY X7502341701 9 © 3/2018 ECHO Inc. ENGLISH Eye Protection ◆ Eye protection that meets ANSI Z87.1 or CE requirements must be worn whenever you operate the unit. ◆ For additional safety, a full-face shield may be worn over safety glasses or goggles to provide protection from sharp branch...

Page 10 - Extended Operation / Extreme Conditions; • Keep your body warm, especially

SAFETY SRM-2620 10 X7502341701 © 3/2018 ECHO Inc. Heavy protective clothing can increase operator fatigue, which may lead to heat stroke. Schedule heavy work for early morning or late afternoon hours when temperatures are cooler. The components of this machine generate an electromagnetic field durin...

Page 11 - • Take periodic breaks to minimize repetition and rest your hands.

SRM-2620 SAFETY X7502341701 11 © 3/2018 ECHO Inc. ENGLISH • If you experience discomfort, redness, and swelling of the fingers followed by whitening and loss of feeling, consult your physician before further exposing yourself to cold and vibration. Repetitive Stress Injuries (RSI) It is believed tha...

Page 12 - Read Manuals; tightly encircling the handles.; Keep A Solid Stance; • Keep exhaust area clear of flammable debris. avoid; Equipment

SAFETY SRM-2620 12 X7502341701 © 3/2018 ECHO Inc. Do not operate this product indoors or in inadequately ventilated areas. Engine exhaust contains poisonous emissions and can cause serious injury or death. Read Manuals • Provide all users of this equipment with literature for instructions on safe op...

Page 13 - Checkwire terminals for secrure connections.

SRM-2620 SAFETY X7502341701 13 © 3/2018 ECHO Inc. ENGLISH ◆ Inspect shield for damage and ensure that shield is properly installed, and that that the cut-off knife is securely in place. Replace if either is damaged or missing. ◆ Check that the cutting attachment is firmly attached and in safe operat...

Page 15 - DESCRIPTION; Shaft Label

SRM-2620 DESCRIPTION X7502341701 15 © 3/2018 ECHO Inc. ENGLISH DESCRIPTION Locate the safety decal(s) on your unit. Make sure the decal(s) is legible and that you understand and follow the instructions on it. If a decal cannot be read, a new one can be ordered from your ECHO dealer. 1 2 5 6 9 10 4 3...

Page 16 - CONTENTS

CONTENTS SRM-2620 16 X7502341701 © 3/2018 ECHO Inc. CONTENTS The ECHO product you purchased has been factory pre-assembled for your convenience. Due to packaging restrictions, some assembly may be necessary. After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer ...

Page 17 - ASSEMBLY; Support Handle Installation; Note: Label shows minimum; OPERATION

SRM-2620 ASSEMBLY X7502341701 17 © 3/2018 ECHO Inc. ENGLISH ASSEMBLY Support Handle Installation Note: Label shows minimum spacing for support handle location. 1. If necessary, position support handle for comfortable operation and securely tighten screws. OPERATION Moving parts can amputate fingers ...

Page 19 - Note: The barrier bar is used to restrict rearward movement of; Blade Selection; Tooth Weed/Grass Blade

SRM-2620 OPERATION X7502341701 19 © 3/2018 ECHO Inc. ENGLISH • A new cotter pin is required each time a blade is installed. • Brushcutters over 7.5 kg (16.5 lbs.) dry weight (without fuel) require a double shoulder harness. Note: The barrier bar is used to restrict rearward movement of the unit. The...

Page 20 - Use Shoulder/Waist Harness

OPERATION SRM-2620 20 X7502341701 © 3/2018 ECHO Inc. A trimmer-brushcutter with a metal blade can cause serious injuries if handled improperly. Always use extreme care when carrying or handling the equipment to avoid contact with the cutting edges of the blade. Use the optional blade cover (A) when ...

Page 21 - Fuel Requirements; Gasoline; approved. ECHO Red Armor; Two Stroke Oil

SRM-2620 OPERATION X7502341701 21 © 3/2018 ECHO Inc. ENGLISH Fuel Diesel fuels and alternative fuels, such as E-15 (15% ethanol), E -85 (85% ethanol) or any fuels not meeting ECHO requirements are NOT approved for use in ECHO 2-stroke gasoline engines. Use of diesel or alternative fuels may cause pe...

Page 22 - Handling Fuel

OPERATION SRM-2620 22 X7502341701 © 3/2018 ECHO Inc. ◆ AVOID repeated or prolonged skin contact ◆ AVOID inhaling oil mists or vapors. ECHO brand 2-stroke oils may be mixed at 50:1 ratio for application in all ECHO engines sold in the past regardless of ratio specified in those manuals. Handling Fuel...

Page 23 - Mixing Instructions; Storage; - Fuel storage laws vary by locality. Contact your

SRM-2620 OPERATION X7502341701 23 © 3/2018 ECHO Inc. ENGLISH Mixing Instructions 1. Fill an approved fuel container with half of the required amount of gasoline. 2. Add the proper amount of 2-stroke oil to gasoline. 3. Close container and shake to mix oil with gasoline. 4. Add remaining gasoline, cl...

Page 24 - Stop Switch

OPERATION SRM-2620 24 X7502341701 © 3/2018 ECHO Inc. Used oil and gasoline, and soiled towels are hazardous waste materials. Disposal laws vary by locality. Starting Cold Engine The attachment will operate immediately when the engine starts, and could result in possible serious injury. Keep movable ...

Page 25 - Choke; Note: If engine does not star t with choke in “RUN” position after 5; Throttle Trigger; Starting Warm Engine; Note: If attachment moves, readjust carburetor according to

SRM-2620 OPERATION X7502341701 25 © 3/2018 ECHO Inc. ENGLISH Lay the unit on a flat area and keep movable attachment parts clear of all obstacles. Firmly grasp throttle handle and throttle trigger lockout with left hand and fully depress throttle trigger to wide open position. Rapidly pull recoil st...

Page 26 - Purge Bulb; Note: If engine does not start after 5 pulls, use Cold Start; Stopping Engine; Throttle

OPERATION SRM-2620 26 X7502341701 © 3/2018 ECHO Inc. 2. Purge Bulb Pump purge bulb (B) until fuel is visible in the “Clear” fuel return line. Pump bulb an additional 4 or 5 times. 3. Recoil Starter Lay the unit on a flat area and keep movable attachment parts clear of all obstacles. Firmly grip thro...

Page 27 - MAINTENANCE; Skill Levels; Level 1; = Moderate difficulty. Some specialized tools may be required.; Level 3; or

SRM-2620 MAINTENANCE X7502341701 27 © 3/2018 ECHO Inc. ENGLISH MAINTENANCE Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop...

Page 30 - Do not damage fuel line while removing fuel filter from tank.; Remove the filter from the line and install the new filter.

MAINTENANCE SRM-2620 30 X7502341701 © 3/2018 ECHO Inc. Assure air filter is assembled with pleats oriented vertically. Fuel Filter Level 1. Parts Required:Tune Up Kit. Fuel is VERY flammable. Use extreme care when mixing, storing or handling, or serious personal injury may result. 1. Use a clean rag...

Page 32 - • Air intakes are blocked,; DO NOT use a metal scraper to remove dirt from the cylinder fins.; Use brush to remove dirt from the cylinder fins.

MAINTENANCE SRM-2620 32 X7502341701 © 3/2018 ECHO Inc. To maintain proper engine operating temperatures, cooling air must pass freely through the cylinder fin area. This flow of air carries combustion heat away from the engine. Overheating and engine seizure can occur when: • Air intakes are blocked...

Page 33 - Spark Arrestor Screen; Parts Required: Spark Arrestor Screen, Gasket; Note: When cleaning carbon; Assemble components in reverse order.; Exhaust Port Cleaning

SRM-2620 MAINTENANCE X7502341701 33 © 3/2018 ECHO Inc. ENGLISH 5. Remove grass and leaves from the grid (C) between the recoil starter and fuel tank. 6. Assemble components in reverse order. Exhaust System Spark Arrestor Screen Level 2. Parts Required: Spark Arrestor Screen, Gasket 1. Remove spark p...

Page 34 - Inspect heat shield, and replace if damaged.; Carburetor Adjustment

MAINTENANCE SRM-2620 34 X7502341701 © 3/2018 ECHO Inc. 1. Remove spark plug lead from spark plug, and remove muffler cover. 2. Place piston at top dead center. Remove muffler (A) and heat shield (B). 3. Use a wood or plastic scraping tool to clean deposits from cylinder exhaust port (C). Never use a...

Page 35 - High Altitude Operation; Note: Every unit is run at the factory and the carburetor is set in

SRM-2620 MAINTENANCE X7502341701 35 © 3/2018 ECHO Inc. ENGLISH Engine Break-In New engines must be operated a minimum duration of two tanks of fuel break-in before carburetor adjustments can be made. During the break-in period your engine performance will increase and exhaust emissions will stabiliz...

Page 36 - Gear Housing; Install the gear housing and shield assembly.

MAINTENANCE SRM-2620 36 X7502341701 © 3/2018 ECHO Inc. Lubrication Level 1. Gear Housing 1. Clean all loose debris from gear case. 2. Remove plug (A) and check level of grease. 3. Add grease if necessary. DO NOT over-fill. Drive Shaft 1. Loosen screw (B) and remove locating screw (C). Pull gear case...

Page 37 - head disassembly is not; Nylon Line Replacement; Wear gloves or personal injury may result:

SRM-2620 MAINTENANCE X7502341701 37 © 3/2018 ECHO Inc. ENGLISH Nylon Line Head Disassembly Instructions Note: For normal use, Speed Feed ® head disassembly is not necessary. However, if circumstances require disassembly, follow these instructions. 1. Press top of locking tabs (A) on both sides of Sp...

Page 40 - TROUBLESHOOTING

TROUBLESHOOTING SRM-2620 40 X7502341701 © 3/2018 ECHO Inc. 3. After sharpening teeth, check each tooth radius for evidence of a square (sharp) corner. Use the round (rat tail) file to renew the radius. TROUBLESHOOTING Fuel vapors are extremely flammable and may cause fire and/or explosion. Never tes...

Page 41 - STORAGE

SRM-2620 STORAGE X7502341701 41 © 3/2018 ECHO Inc. ENGLISH STORAGE During operation the muffler or catalytic muffler and surrounding cover become hot. Always keep exhaust area clear of flammable debris during transportation or when storing, otherwise serious property damage or personal injury may re...

Page 42 - SPECIFICATIONS; MODEL

SPECIFICATIONS SRM-2620 42 X7502341701 © 3/2018 ECHO Inc. 2. Place the stop switch in the “OFF” position. 3. Remove accumulation of grease, oil, dirt and debris from exterior of unit. 4. Perform all periodic lubrication and services that are required. 5. Tighten all the screws and nuts. 6. Drain fue...

Page 44 - PRODUCT REGISTRATION; Thank you for choosing ECHO Power Equipment; FAST

PRODUCT REGISTRATION SRM-2620 44 X7502341701 © 3/2018 ECHO Inc. PRODUCT REGISTRATION Thank you for choosing ECHO Power Equipment Please go to http://www.echo-usa.com/Warranty/Register-Your-ECHO to register your new product on-line. It's FAST and EASY ! NOTE: your information will never be sold or mi...

Page 46 - NOTES