Dyson 473814-01 - Manuals

Caring for your floors Check that the underside of the cleaner head or tool is clean and free from any objects that may cause damage. Before vacuuming your flooring, rugs, and carpets, check the manufacturer’s recommended cleaning instructions. The brush bar on your machine can damage certain carpet...

If you have additional click-in batteries, we recommend that you alternate the batteries to maintain even performance. Charging your machine Connect to the charger either directly or in the dock. The blue LEDs on either side of the battery will flash during charging. When the battery is fully charge...

Check the wand for blockages. Check your cleaner head for blockages, following the instructions to remove the brush bar, where necessary. Disconnect your machine from the charger before looking for blockages. Be careful not to touch the trigger and be aware of sharp objects. Leave your machine to co...

Replace your brush bar Remove your brush bar Look for obstructions Don’t put any part of your machine in a dishwasher or use detergents, polishes or air fresheners. Press the cleaner head release button on the end of the wand. Place the cleaner head upside down. Use a coin to unlock the end cap. Twi...

Remove the cover and brush bar Look for obstructions Re–assemble Hair screw tool Your Hair screw tool doesn't have a washable brush bar. To maintain optimum performance, check your brush bar regularly and clear any obstructions. Make sure your machine is disconnected from the charger and take care n...

Washing your filter Wash your filter Fill and shake Shake and dry Tap your filter Twist off your filter For more information and support videos for your machine go online: www.dyson.com/support Wash with warm, running tap water – gently rubbing your filter with your fingers to remove the dirt. Place...

Replace your brush bar Remove your brush bar Wash and dry your brush bar Don’t put any part of your machine in a dishwasher or use detergents, polishes or air fresheners. Press the cleaner head release button on the end of the wand. Place the cleaner head upside down. Push the end cap up fully and p...

Cleaning your tools Don’t put any part of your machine in a dishwasher or use detergents, polishes or air fresheners. Wipe with a damp, lint-free cloth, without touching the connector end. Make sure your tools are completely dry before using. Combination tool Extension hose Light pipe crevice tool C...

Looking after your machine Look after your battery Look after your machine To always get the best performance from your machine, it’s important to clean it regularly and check for blockages. To get the best performance and life from your battery, use Eco or Auto/Med mode. Your machine won’t operate ...