Dynex dx-drtvm102 - Manuals

Dynex dx-drtvm102 – Manual in PDF format online.

Manuals:

Manual

Manual Dynex dx-drtvm102

Summary

Page 2 - Safety information and specifications; IMPORTANT SAFETY; Do not use this product for any; Maximum weight

2 Need help? Call 800-305-2204 Safety information and specifications IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS CAUTION: Do not use this product for any purpose not explicitly specified by Dynex.Improper installation may cause property damage or personal injury. If you do not understand...

Page 3 - TVs the wall mount fits; rt

3 Need help? Call 800-305-2204 TVs the wall mount fits The wall mount fits TVs with M4, M5, or M6 screw holes that are the following distances apart: 13.8" (35 cm) maximum horizontal distance 9 .1" (23 cm) v e rt ical distanc e DX-DRTVM102_12-1058_MAN_V3_ENG.fm Page 3 Wednesday, April 10, 20...

Page 4 - Tools needed; You will need the following tools to assemble your new wall mount:; OR

4 Need help? Call 800-305-2204 Parts Tools needed You will need the following tools to assemble your new wall mount: Edge-to-edge stud finder Pencil Tape measure Hammer Level Phillips screwdriver Socket wrench with 1/2" (13 mm) socket or adjustable wrench Drill 7/32" (5.5 mm) wood drill bit ...

Page 5 - Package contents; TV Hardware Bag; Not all hardware will be used.; Concrete anchor; Label; M6 washer

5 Need help? Call 800-305-2204 Package contents Make sure you have all the parts necessary to assemble your new TV wall mount: A Wall Plate (1) B Left TV Bracket (1) C Right TV Bracket (1) R Wall Plate Template (1) Hardware TV Hardware Bag Note: Not all hardware will be used. Make sure you have all ...

Page 6 - The center of your TV will match the center of the wall plate (; measurement is; Measuring tape

6 Need help? Call 800-305-2204 Assembly instructions Step 1: Determine the wall-mount location. Note: For help with determining where you need to drill screw holes, use the HeightFinder™ Installation Assistant at: http://mf1.bestbuy.selectionassistant.com/index.php/heightfinder The center of your TV...

Page 7 - Option 1: Installing on a wood stud wall; Align the wall plate with the pilot holes, then place the washers (; D E

7 Need help? Call 800-305-2204 Step 2 - Option 1: Installing on a wood stud wall Note: Any drywall covering the wall must not exceed 5/8" (16 mm). 1 Locate the studs. Verify the center of the stud* with an edge-to-edge stud finder. 2 At the wall height you determined in the previous step, align ...

Page 8 - Option 2: Installing on a solid concrete or concrete block wall*; Mount the wall plate directly onto the concrete surface.; Insert concrete wall anchors (

8 Need help? Call 800-305-2204 Step 2 - Option 2: Installing on a solid concrete or concrete block wall* Note: Mount the wall plate directly onto the concrete surface. 1 At the wall height you determined in the previous step, align the wall plate template ( R ) against the wall, make sure that it is...

Page 9 - Flat back; Obstructed back; assembling the wall mount.; Irregularly-shaped back; spacers when assembling the wall mount.; Remove the TV brackets.

9 Need help? Call 800-305-2204 Step 3: Determine whether your TV has a flat back or an irregular or obstructed back 1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches. 2 If your TV has a table-top stand attached, remove the stand...

Page 10 - Step 4: Select screws and spacers; Select one of the following types of washers:; To avoid potential personal injuries and

10 Need help? Call 800-305-2204 Step 4: Select screws and spacers 1 Select the hardware for your TV (screws, washers, and spacers). See the documentation that came with your TV for screw length and diameter. A limited number of TVs come with mounting hardware included. (If there are screws that came...

Page 11 - Step 5: Adjusting the tilt; The tilt on the left TV bracket (; Use a Phillips screwdriver to remove the two tilt screws (; and; Do not over tighten the screws.; Option 2: Mount not tilted; Tilt bracket

11 Need help? Call 800-305-2204 Step 5: Adjusting the tilt Note: The tilt on the left TV bracket ( B ) and right TV bracket ( C ) must be the same. 1 Use a Phillips screwdriver to remove the two tilt screws ( S ) from the outside edges of each TV bracket ( B and C ). 2 To tilt the TV forward by 5°, ...

Page 12 - Step 6 - Option 1: Installing on a TV with a flat back; Align the holes you noted on the left TV bracket (; Screws

12 Need help? Call 800-305-2204 Step 6 - Option 1: Installing on a TV with a flat back 1 Align the holes you noted on the left TV bracket ( B ) and right TV bracket ( C ) with the screw holes on the back of your TV. The brackets are marked “R” for the right bracket and “L” for the left bracket. Make...

Page 13 - Option 2: Installing on a TV with an irregular or obstructed back; or

13 Need help? Call 800-305-2204 Step 6- Option 2: Installing on a TV with an irregular or obstructed back 1 Place the spacers ( P or Q ) over the mounting holes in the back of your TV. 2 If you are using M4 or M5 screws, place M4/M5 washers ( N ) over the spacers. 1 Align the holes you noted on the ...

Page 14 - Step 7: Mount the TV on the wall plate; Lower the TV onto the wall plate (

14 Need help? Call 800-305-2204 Step 7: Mount the TV on the wall plate Lower the TV onto the wall plate ( A ) making sure that the hooks on the top of the left and right TV brackets ( B and C ) slide over the top of the wall plate ( A ) and the hooks on the bottom of the TV brackets slide under the ...

Page 15 - Removing the TV from the wall plate; Unlatched

15 Need help? Call 800-305-2204 Removing the TV from the wall plate 1 Grasp the TV by the bottom edge, then pull down on the locking cords and pull the bottom of the TV out from the wall. 2 Release the locking cords and lift the top of the TV from the wall bracket. For customer service, call: 800-30...